Analog Devices

ADSP-2115BP-100 - 16-Bit 20 Mips DSP | Analog Devices

MPN: ADSP-2115BP-100 ✓ Aktif
5 V Vdss 68-pin plastic leaded chip carrier (PQCC-68 / LCC-68) Package 25 MHz Speed On-chip program RAM and data RAM Memory
MOQ: 1 |

ADSP-2115BP-100 Ringkasan

The Analog Devices ADSP-2115BP-100 is a 16-bit fixed-point digital signal processor capable of 20 Mips and operation at 25 MHz, with one serial port and on-chip memory in a 68-pin plastic leaded chip carrier package. The processor belongs to the ADSP-2100 family and combines an enhanced Harvard architecture, dual data buses, independent computation units, and a single-cycle instruction execution model for high-speed numeric processing.

A digital signal processor, or DSP, is a microprocessor architecture optimized for filtering, signal transformation, control, and other numerically intensive workloads. Unlike a general-purpose processor, the ADSP-2115BP-100 organizes instruction, program-memory, and data-memory access around parallel computational paths. This hierarchy places it among fixed-point DSP microprocessors, microcontrollers, processors, and semiconductor ICs used to implement real-time signal-processing systems.

Principal features include a 16-bit fixed-point architecture, 20 Mips peak processing performance, a 25 MHz clock rating, and one serial port. The enhanced Harvard organization uses an instruction bus and dual data buses for three-bus performance. Independent arithmetic logic, multiplier-accumulator, and shifter units reduce the number of cycles required for common DSP operations, while on-chip program and data RAM support compact standalone or tightly coupled implementations.

The ADSP-21xx processors share a common core containing computation units, data address generators, and a program sequencer. The ADSP-2115 differentiates itself through its on-chip program and data memory RAM, programmable timer, and one serial port. These resources allow designers to execute signal-processing algorithms without relying on a separate external memory or host processor for routine control and data movement.

Typical uses include industrial control, communications signal conditioning, audio processing, instrumentation, and embedded motor-control systems. The device is especially relevant where deterministic fixed-point arithmetic, serial data transfer, and a compact dedicated processor are more important than general-purpose software support or a large peripheral set. The 68-pin package supports conventional through-hole PCB assembly rather than a fine-pitch surface-mount footprint.

Design planning should focus on clock generation, reset, memory interfacing, serial-port implementation, supply sequencing, and pin multiplexing described in the ADSP-2115 datasheet and ADSP-2100 Family User's Manual. Because the BP suffix denotes a specific package and ordering configuration, engineers should verify the exact temperature, lead, and grade requirements before committing the design to production.

This product overview combines the manufacturer product-page architecture description with the ordered-part specifications, package information, and practical selection guidance needed to evaluate the ADSP-2115BP-100 as a dedicated fixed-point signal-processing component.

Pilihan pengganti yang segera untuk ADSP-2115BP-100 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

ADSP-2115BP-100

✅ Masuk Drop-In
Analog Devices
📦 LCC-68
16-bit fixed-point digital signal processor · 25 MHz · 20 Mips · 16 bit · Enhanced Harvard architecture · 1 instruction bus and 2 data buses · ALU, multiplier-accumulator, and shifter · 1 serial port

Hubungi untuk harga

Lihat Datasheet →

ADSP-2115BP-100 Spesifikasi

Processor Type 16-bit fixed-point digital signal processor
Clock Frequency 25 MHz
Peak Instruction Throughput 20 Mips
Instruction Word Length 16 bit
Architecture Enhanced Harvard architecture
Internal Buses 1 instruction bus and 2 data buses
Computation Units ALU, multiplier-accumulator, and shifter
Serial Port Count 1 serial port
On-Chip Memory On-chip program RAM and data RAM
Timer 1 programmable timer
Package Type 68-pin plastic leaded chip carrier (PQCC-68 / LCC-68)
Package Technology Plastic leaded chip carrier
Gaya Pemasangan Through-hole leaded package
Tegangan Pemberi Arus Operasi 5 V

Panduan Konfigurasi Pin ADSP-2115BP-100 plastic leaded chip carrier

Konfigurasi pin untuk ADSP-2115BP-100 (plastic leaded chip carrier pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai plastic leaded chip carrier untuk ADSP-2115BP-100

Tiada data garisan pin yang diperoleh untuk ADSP-2115BP-100.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADSP-2115BP-100 patut untuk 6 aplikasis: Industrial Automation and Control, Communications Signal Conditioning, Audio and Speech Processing, Instrumentation and Measurement, Motor Control and Positioning, Embedded Data Acquisition.

🏭

Industrial Automation and Control

The ADSP-2115BP-100 fits deterministic industrial control blocks that perform filtering, proportional control, signal compensation, or coordinate calculations in real time. Its 16-bit fixed-point architecture and 20 Mips throughput provide dedicated numerical execution, while the 25 MHz clock supports compact control loops without requiring a general-purpose operating system. The independent ALU, multiplier-accumulator, and shifter are particularly useful for proportional-integral-derivative calculations, digital filters, and transformations. On-chip program and data RAM can hold interrupt routines and working data close to the processor, and the serial port supports connection to sensors or downstream controllers. The 68-pin leaded package is also convenient for through-hole industrial boards and prototype systems.

🌐

Communications Signal Conditioning

The ADSP-2115BP-100 is appropriate for embedded communications front ends that require fixed-point filtering or spectral-processing work close to the data source. Its enhanced Harvard architecture separates instruction access from the two data buses, supporting parallel movement of coefficients and samples, while the multiplier-accumulator accelerates FIR-style arithmetic. At 20 Mips and 25 MHz, the processor can implement deterministic sampling, modulation, demodulation, or echo-compensation routines within a compact controller. The single serial port provides a straightforward interface for received data or a companion transceiver. Designers should allocate the available RAM carefully, avoid unnecessary data copies, and use the manufacturer timing information to establish safe bus and serial-port bandwidth.

🎧

Audio and Speech Processing

The ADSP-2115BP-100 can serve as a dedicated audio-processing engine when the system requires predictable fixed-point arithmetic rather than a general-purpose multimedia processor. Its multiplier-accumulator, shifter, and independent data paths are well suited to FIR filters, equalization, mixing, dynamic-range processing, and sample-rate conversion. A 20 Mips execution rate and 25 MHz clock provide a defined computational budget for time-critical audio tasks, while on-chip RAM helps retain coefficients and working buffers. The single serial port may carry PCM data or connect to a codec, depending on the selected system architecture. Clock generation and codec timing must be checked carefully, and designers should avoid assuming that serial throughput or on-chip memory capacity exceeds the limits in the manufacturer documentation.

🔧

Instrumentation and Measurement

The ADSP-2115BP-100 is suitable for embedded measurement systems that must condition samples and calculate corrected results in real time. Filtering, interpolation, calibration, curve fitting, and statistical operations can benefit from the dedicated multiplier-accumulator and shifter units, while the enhanced Harvard architecture supports concurrent instruction and data movement. The 20 Mips rating provides a useful benchmark for estimating an algorithm's execution budget at the 25 MHz operating frequency. Its on-chip RAM supports compact buffer and coefficient storage, and the serial port can connect to an ADC, DAC, or instrument front end. For precision measurements, separate analog and digital grounding, adequate regulator decoupling, and short signal paths remain as important as the processor configuration itself.

🖥️

Motor Control and Positioning

The ADSP-2115BP-100 can support embedded motor-control and positioning systems that require fast fixed-point loops, timing functions, and compact code execution. Its 16-bit arithmetic and multiplier-accumulator are useful for current-loop calculations, transformations, trajectory interpolation, and digital filtering of position feedback. The programmable timer helps organize periodic control activity, while one serial port can exchange commands or diagnostic data with a host or motion controller. Running from 5 V and using a 68-pin leaded package, the processor fits rugged through-hole controller platforms where serviceability and unambiguous package availability are priorities. Validation should include worst-case loop latency, timer jitter, serial bandwidth, startup behavior, and safe output states when the processor is reset or faults.

📡

Embedded Data Acquisition

The ADSP-2115BP-100 is useful in acquisition systems that convert a serialized stream of sensor or converter data into processed results. The single serial port can receive data while the DSP performs filtering, scaling, rate conversion, or feature extraction, and the enhanced Harvard organization supports efficient movement of samples and coefficients. At 20 Mips and 25 MHz, the processor provides a fixed computational ceiling for designing acquisition timing budgets. On-chip program and data RAM helps reduce external-memory traffic for local algorithms, which can simplify board partitioning and improve determinism. The 68-pin PQCC/LCC footprint also allows through-hole construction. System-level design must confirm the electrical interface voltage, isolation requirements, grounding strategy, and whether a higher-speed external interface is required.

What is the ADSP-2115BP-100?
The ADSP-2115BP-100 is a 16-bit fixed-point digital signal processor with a 25 MHz clock, 20 Mips throughput, one serial port, and on-chip program and data memory. According to the Analog Devices ADSP-2115 datasheet, it belongs to the ADSP-21xx processor family and uses an enhanced Harvard architecture with an instruction bus and two independent data buses.
What are the key specifications of ADSP-2115BP-100 that engineers should know?
The ADSP-2115BP-100 combines 16-bit fixed-point processing, a 25 MHz clock, 20 Mips throughput, one serial port, and on-chip RAM in a 68-pin plastic LCC package. The Analog Devices datasheet identifies independent ALU, multiplier-accumulator, and shifter units within an enhanced Harvard architecture, making the device suitable for deterministic embedded signal-processing workloads.
What is the operating voltage of ADSP-2115BP-100?
The ADSP-2115BP-100 operates from a 5 V supply. The 5 V rating appears in the ordered-part summary published alongside the Analog Devices ADSP-2115 datasheet. Designers should also account for the supply-voltage tolerances, sequencing, and decoupling requirements stated in the complete manufacturer datasheet.
Where can I download the ADSP-2115BP-100 datasheet PDF?
The official ADSP-2115 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADSP-2115.pdf. The manufacturer states that this document provides a general overview of ADSP-21xx functionality, while detailed architecture and instruction-set information is found in the ADSP-2100 Family User's Manual.
Where can I find the ADSP-2115BP-100 pinout?
The ADSP-2115BP-100 pinout is documented in the Analog Devices ADSP-2115 datasheet, including the 68-pin PQCC/LCC package drawing and signal descriptions. Use that table to assign supplies, clocks, reset signals, serial-port functions, memory interfaces, and address lines; the processor also has a pin-description reference in the ADSP-2100 Family User's Manual.
What can replace the ADSP-2115BP-100?
No verified same-package drop-in replacement for the ADSP-2115BP-100 was identified in the available cross-reference results. A valid replacement must preserve the 68-pin PQCC/LCC footprint, 5 V operation, memory interface, serial-port behavior, clocking, and software compatibility; therefore, a generic DSP should not be treated as a drop-in substitute without complete design validation.
Is ADSP-2115BP-100 the same as ADSP-2115BP?
The ADSP-2115BP-100 is a specific ordering configuration of the ADSP-2115 processor family. The -100 suffix is a grade or ordering code, so it can identify a particular temperature, package, and qualification configuration. Confirm the full suffix requirements in the manufacturer ordering guide before treating another ADSP-2115 order code as interchangeable.
Where can I buy ADSP-2115BP-100 online?
Use the Request a Quote form on this page to request ADSP-2115BP-100 availability, unit pricing, and order quantities. The form allows purchasing teams to confirm current stock, minimum order quantity, and lead time for the exact MPN rather than relying on an ambiguous family-level listing or a package-code substitute.
What is the price of ADSP-2115BP-100?
Current unit pricing for ADSP-2115BP-100 should be requested through the Request a Quote form on this page. The quote can reflect the exact 68-pin package and -100 ordering suffix, along with the requested quantity, supporting a procurement decision based on the exact configuration instead of a related ADSP-2115 variant.
What is the lead time for ADSP-2115BP-100?
The current lead time for ADSP-2115BP-100 is best confirmed through the Request a Quote form on this page. Include the required quantity, target shipment date, and whether the order must ship as a single reel or production lot so the supplier can return a lead time tied to the exact ordering configuration.
Is ADSP-2115BP-100 in stock?
Submit an availability request through the Request a Quote form on this page to determine whether ADSP-2115BP-100 is currently in stock. Include the required quantity and packaging preference, and request a dated confirmation because availability for a specialized 68-pin DSP can change independently of the broader ADSP-2115 family.
When should I choose the ADSP-2115BP-100 for a DSP design?
Choose the ADSP-2115BP-100 when a design benefits from dedicated 16-bit fixed-point execution at 20 Mips, 25 MHz operation, on-chip RAM, and a serial interface in a 68-pin leaded package. It is particularly appropriate for deterministic embedded signal processing, industrial control, communications conditioning, and instrumentation where a general-purpose processor is unnecessary.
Is ADSP-2115BP-100 suitable for industrial control applications?
The ADSP-2115BP-100 can suit industrial control applications that require deterministic fixed-point math, a programmable timer, serial communication, and on-chip memory. Its 25 MHz clock and 20 Mips throughput support real-time algorithms, while the 68-pin PQCC/LCC package is practical for through-hole industrial controller boards.
What is the difference between ADSP-2115 and ADSP-2115BP-100?
ADSP-2115 identifies the processor family device, while ADSP-2115BP-100 identifies one complete ordering configuration with a BP suffix and -100 grade code. The Analog Devices ordering information and datasheet must be used to determine the exact package, temperature range, and qualification associated with that suffix.
How do ADSP-21xx processors support real-time signal processing?
ADSP-21xx processors support real-time signal processing through their enhanced Harvard architecture, one instruction bus, dual data buses, and independent computation units. According to the Analog Devices product page, the common core combines computation units, data address generators, and a program sequencer, allowing DSP operations to proceed with predictable execution behavior.
What is the best Analog Devices equivalent for ADSP-2115BP-100?
No verified Analog Devices drop-in equivalent for the exact ADSP-2115BP-100 ordering configuration was established. The closest same-family candidates must still be checked for identical 68-pin pinout, 5 V operation, memory organization, serial-port functions, clock requirements, and supported temperature range before they can replace the target on an unchanged PCB.

Data referensi kejuruteraan untuk ADSP-2115BP-100 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADSP-2115BP-100 for an embedded design that needs deterministic 16-bit fixed-point processing, 20 Mips throughput, a 25 MHz clock, on-chip RAM, and one serial port in a through-hole 68-pin package. It is a strong fit for industrial control, signal conditioning, audio processing, measurement, and motor-control systems where a dedicated processor is preferable to a general-purpose MCU. Before ordering, verify the -100 grade, temperature range, clock requirements, memory organization, and complete 68-pin signal map. No verified drop-in replacement was identified, so changing processor families should be treated as a redesign unless an authorized manufacturer cross-reference explicitly confirms pin, clock, electrical, memory, and software compatibility.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Analog Devices
Package 68-pin plastic leaded chip carrier (PQCC-68 / LCC-68)
Processor Type 16-bit fixed-point digital signal processor
Clock Frequency 25 MHz
Peak Throughput 20 Mips
Serial Port Count 1 serial port
Internal Architecture Enhanced Harvard architecture with one instruction bus and two data buses
On-Chip Memory On-chip program RAM and data RAM
Supply Voltage 5 V

Penyeberangsung Jelas

  • Dedicated fixed-point signal-processing architecture (vsGeneral-purpose 16-bit microprocessor)
  • Integrated memory and serial interface (vsExternal-memory DSP implementation)
  • Serviceable leaded package (vsFine-pitch surface-mount DSP)

Catatan Desain

Treat the ADSP-2115BP-100 as a through-hole 68-pin PQCC/LCC device and preserve the manufacturer footprint dimensions and pin numbering in the PCB library. Place the clock and reset components near their associated pins, provide a low-impedance ground plane, and route the serial interface away from sensitive analog inputs. Confirm symbol and pad assignments against the Analog Devices datasheet before fabrication.

Use the supply-decoupling network and component placement specified by the manufacturer. The processor operates at 5 V, so regulator output, startup sequencing, and input-voltage tolerance must be verified for the exact -100 ordering configuration. Keep switching-regulator layouts separate from the DSP supply path where possible and evaluate ripple at the device pins rather than only at the regulator output.

Do not substitute a generic 68-pin processor merely because the lead count matches. Pin compatibility requires matching power, clock, reset, memory, serial-port, program-control, and interrupt signals. Also confirm the exact meaning of the BP and -100 ordering codes, because a family member with different grade, temperature, package, or lead-finish requirements may require a different BOM entry.

Establish signal-integrity margins for the clock and external bus using the device speed and layout rules in the manufacturer documentation. Keep clock routing short and continuous, avoid unnecessary stubs, and return high-speed signals over uninterrupted reference planes. If the design expands beyond on-chip memory, analyze bus timing and processor stalls before selecting external memory or peripheral devices.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was included in the product information. The -100 suffix is an ordering code and must not be interpreted as an automotive qualification without a specific manufacturer statement.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADSP-2115BP-100 datasheet ADSP-2115BP-100 datasheet pdf ADSP-2115BP-100 pinout ADSP-2115BP-100 specifications ADSP-2115BP-100 equivalent ADSP-2115BP-100 replacement ADSP-2115BP-100 price ADSP-2115BP-100 stock Analog Devices ADSP-2115BP-100 ADSP-2115BP-100 68 pin package

Komponen dan Tanda berkaitan

Analog Devices ADSP-2115BP-100 ADSP-2115 ADSP-21xx ADSP-2100 family digital signal processor DSP fixed-point microprocessor microcontroller processor semiconductor IC enhanced Harvard architecture instruction bus dual data buses arithmetic logic unit ALU multiplier-accumulator shifter program sequencer data address generator program RAM data RAM programmable timer serial port 20 Mips 25 MHz 5 V supply PQCC-68 LCC-68 industrial control signal conditioning
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ