ADV7180KCP32Z - 10-Bit SDTV Video Decoder | Analog Devices
MPN: ADV7180KCP32Z ✗ Akhir HayatADV7180KCP32Z Ringkasan
A video decoder is an interface IC that reconstructs digital luminance and chrominance information from an analog television composite signal. It sits between an analog video front end and a digital media pipeline. The ADV7180 family combines analog-to-digital conversion, demodulation, color decoding, and formatting into one device. This integration reduces the number of discrete signal-processing blocks required for standard-definition television, surveillance, image-capture, and legacy video-input applications.
Principal features include automatic recognition of worldwide NTSC, PAL, and SECAM signals, 4× oversampling, and an 8-bit-compatible ITU-R BT.656 serial output. The serial interface can connect to MPEG encoders, video codecs, mobile video processors, and digital video processing blocks without requiring a separate external data-format converter. An I2C interface provides host access to device control functions. The compact 32-LFCSP package also supports space-constrained portable and embedded equipment designs.
The decoder architecture is tailored to composite analog video rather than general-purpose image sensing. The internal conversion and demodulation stages produce synchronized component-video data, while the output stage presents that data in a standardized serial format. Because the ADV7180KCP32Z targets standard-definition formats, it is not a substitute for a high-definition or modern all-pixel image sensor. The system must provide a suitable analog video input, stable synchronization reference, correct I2C addressing, and power rails appropriate for the complete analog and digital sections.
Typical applications include digital cameras, mobile phones, portable video equipment, video capture systems, and embedded multimedia products that still accept NTSC, PAL, or SECAM composite video. In these systems, the ADV7180KCP32Z converts the legacy composite input into a digital stream that a downstream codec, encoder, storage controller, or display pipeline can process. The 5 mm by 5 mm LFCSP footprint is particularly useful where analog video support must be added without occupying a large board area.
PCB implementation requires careful treatment of the analog input, digital output, supply, and exposed-pad connections. The manufacturer ADV7180 schematic checklist should be used during design review to validate component values, net names, layer stack assumptions, and the final reference schematic. Maintain short return paths around the analog input and supply pins, and provide the decoupling and exposed-pad land pattern prescribed by the package drawing.
This product page combines the manufacturer’s decoder capabilities, package information, lifecycle status, sourcing path, interface guidance, and application analysis into one engineering-oriented reference. It also distinguishes true package-compatible alternatives from broader functional equivalents so that designers can assess PCB reuse before changing an approved design.
Pilihan pengganti yang segera untuk ADV7180KCP32Z — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ADV7180KCP32Z (sama faktor bentuk dan kaki) — berbeza dalam Control Interface, Mounting Type, Package.
ADV7180WBCPZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ADV7180BCPZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ADV7183BBSTZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ADV7180KCP32Z Spesifikasi
| Product Type | 10-bit, 4× oversampling SDTV video decoder |
| Analog Input Standards | NTSC, PAL, and SECAM |
| Digital Output Resolution | 10 bit |
| Oversampling Rate | 4× |
| Digital Output Interface | Serial ITU-R BT.656, 8-bit component data |
| Control Interface | I2C |
| Output Format | 4:2:2 component video |
| Input Type | Analog baseband television composite video |
| Automatic Format Detection | Supported for NTSC, PAL, and SECAM |
| Kemasan | 32-LFCSP (5 mm × 5 mm) |
| Jenis Pemasangan | Surface-mount SMD |
| Exposed Thermal Pad | Present |
| Packaging | Tray |
Panduan Konfigurasi Pin ADV7180KCP32Z 32-lfcsp (5 mm × 5 mm)
Konfigurasi pin untuk ADV7180KCP32Z (32-lfcsp (5 mm × 5 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk ADV7180KCP32Z.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ADV7180KCP32Z patut untuk 6 aplikasis: Digital Camera Video Capture, Mobile Phone Legacy Video Input, Portable Video Equipment, Video Encoding Front End, Security Camera Interface, Embedded Multimedia Control.
Digital Camera Video Capture
The ADV7180KCP32Z is suitable for a digital camera or imaging appliance that must ingest legacy NTSC, PAL, or SECAM composite video. Its 10-bit decoder and 4× oversampling provide the front-end conversion stage, while the serial ITU-R BT.656 output can feed a dedicated encoder, codec, or image-processing pipeline. The 32-LFCSP package measuring 5 mm × 5 mm limits board-area impact in compact camera electronics. Designers should verify the analog signal amplitude, synchronization expectations, and BT.656 clocking against the target camera interface. Because the part supports standard-definition composite video rather than a direct sensor output, it is best positioned as an auxiliary analog-input path rather than the primary image-sensor interface.
Disebarkan
Mobile Phone Legacy Video Input
The ADV7180KCP32Z can add worldwide analog television reception to a mobile-phone or portable-media design that still requires NTSC, PAL, and SECAM compatibility. The decoder automatically identifies the input standard and converts composite video into 4:2:2 component data, allowing the phone’s existing codec or display subsystem to consume a standardized BT.656 stream. Its I2C control interface permits a host processor to configure the decoder without a dedicated parallel control port. Space is especially important in handheld equipment, so the compact 5 mm × 5 mm LFCSP footprint is valuable. Thermal verification is still required because analog, digital, and exposed-pad power dissipation share the same constrained board environment.
Disebarkan
Portable Video Equipment
For portable video recorders, industrial tablets, and compact media appliances, the ADV7180KCP32Z provides a straightforward path from analog composite video to a digital processor. Its 10-bit conversion and 4× oversampling fit standard-definition workflows, while automatic NTSC, PAL, and SECAM detection reduces configuration complexity across regions. The BT.656 output can feed an MPEG encoder, video codec, storage controller, or display interface when signal timing is matched correctly. Compared with a multi-chip analog television receiver, the integrated decoder reduces board area and external interface count. The design must still account for synchronization, analog input conditioning, stable supplies, and the thermal path from the exposed pad to the ground plane.
Disebarkan
Video Encoding Front End
The ADV7180KCP32Z can serve as the analog-to-digital stage ahead of an MPEG encoder in legacy broadcast and contribution equipment. Its automatic standard detection and support for NTSC, PAL, and SECAM provide a consistent input path, while the serial ITU-R BT.656 output supplies component-video data to the encoder. The architecture is most appropriate when the downstream encoder expects 8-bit-compatible BT.656 and the source remains standard definition. An advantage of this approach is the reduction in external demodulation and formatting chips. Integration must be reviewed carefully for electrical levels, blanking intervals, pixel clock relationships, and control sequencing so the decoder and encoder operate as one synchronized video system.
Disebarkan
Security Camera Interface
The ADV7180KCP32Z can support legacy analog surveillance-camera inputs where a new system must retain compatibility with installed composite-video equipment. It automatically recognizes NTSC or PAL sources and converts them into digital component data for downstream compression, recording, or network transmission. The 10-bit decoding stage and BT.656 output provide a defined boundary between the analog camera input and digital video system. A practical security-camera design should use a low-noise analog input path, isolated supply distribution where required, and a solid ground reference beneath the exposed pad. Because the decoder handles composite baseband video rather than decoded camera transport streams, it does not replace a dedicated video serializer in modern networked camera designs.
Disebarkan
Embedded Multimedia Control
The ADV7180KCP32Z fits embedded multimedia products that need to retain analog television input while also processing digital media internally. The I2C interface gives the embedded controller a compact management path, and the BT.656 output presents decoded video to an encoder, codec, FPGA, or application processor. Automatic NTSC, PAL, and SECAM detection reduces the need for user-selected country or broadcast-standard settings. For a mixed-signal design, the decoder should be positioned near the analog connector and away from high-current switching nodes, with its supply and return paths planned as part of the complete stack-up. The final layout should follow the manufacturer’s reference schematic and schematic-check-list guidance for component placement and connectivity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ADV7180KCP32Z — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ADV7180WBCPZ | ADV7180BCPZ | ADV7183BBSTZ |
|---|---|---|---|---|
| Package | 32-LFCSP (5 mm × 5 mm) | 32-LFCSP (5 mm × 5 mm) | 32-LFCSP (5 mm × 5 mm) | 32-LFCSP (5 mm × 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
Penyeberangsung Jelas
- Combines worldwide composite-video decoding with a standardized digital output (vsTVP5150AM1)
- Provides an integrated 4:2:2 conversion stage (vsTDA9886)
- Offers a documented host-control path (vsMAX9526)
Catatan Desain
Use the official ADV7180 schematic checklist during design review. Confirm the 32-LFCSP land pattern, exposed-pad geometry, component values, pin assignments, and power connections against the manufacturer package drawing. Place input, output, and supply decoupling components directly at their associated pins, and route analog-video traces away from switching-node and digital-clock return currents.
The 32-LFCSP includes an exposed pad that is part of the package’s heat-dissipation path. Provide a continuous ground-plane connection beneath the pad using the manufacturer land pattern and verify the resulting junction temperature in the final board stack-up. Do not assume that a small exposed pad alone guarantees acceptable temperature rise in an enclosed product with little airflow.
Treat the BT.656 output as a clocked digital interface and the composite-video input as a sensitive analog path. Match output routing according to the interface’s clocking method, minimize stub lengths, maintain a continuous return reference, and keep the analog and digital grounds compatible at the device. Validate blanking, synchronization, and pixel-clock relationships with the downstream encoder or processor.
Do not confuse this 10-bit SDTV decoder with a high-definition decoder, a camera image sensor, or a video encoder. The device expects compatible analog composite video and produces 4:2:2 component data through an 8-bit-compatible BT.656 interface. Also do not treat functional equivalents such as TVP5150AM1, TDA9886, or MAX9526 as PCB drop-ins without completing pin, register, timing, and electrical comparisons.
Maklumat Kesediaan
No component-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 is not applicable to this general-purpose SDTV video decoder.