Analog Devices

ADV7186BBCZ-T-RL - Video Decoder | Analog Devices | 196-CSPBGA

MPN: ADV7186BBCZ-T-RL ✓ Aktif
NTSC, PAL, SECAM Rds(on) 196-CSPBGA (12 x 12 mm) Package
MOQ: 1 |

ADV7186BBCZ-T-RL Ringkasan

Analog Devices ADV7186BBCZ-T-RL is a single-chip multiformat video decoder and display processor designed for NTSC, PAL, and SECAM analog video systems. The device uses one 10-bit ADC in its analog front end, includes a flexible 24-bit pixel output interface, and provides an independent BT.656 output channel. Its control interface is analog-voltage based, and it is supplied in a 196-CSPBGA package measuring 12 x 12 mm. The -T variant provides an LCD timing controller, or TCON, output for display-panel timing and PWM backlight-control functions.

A video decoder is an interface IC that converts composite or component analog video into digital pixel and timing data for processing, display, capture, or transmission. The ADV7186 belongs to the video-processing hierarchy, combining analog front-end conversion, video decoding, digital pixel output, and LCD timing control in one package. This integration can reduce the number of separate interface devices required in industrial imaging, broadcast equipment, surveillance systems, and embedded display designs.

The ADV7186BBCZ-T-RL supports analog-video decoding for NTSC, PAL, and SECAM standards. Its analog front end uses a single high-speed, 10-bit ADC, while the output section provides a flexible 24-bit digital pixel interface and a separate BT.656 channel. The LCD timing controller supports timing requirements for LCD panels, and the integrated PWM backlight-control function is intended for compatible panel backlight systems. These functions distinguish the -T device from the base ADV7186BBCZ configuration.

The target device does not include the LVDS receiver found on ADV7186BBCZ and ADV7186BBCZ-T, nor does it provide the LVDS transmitter found on ADV7186BBCZ. Instead, the -T version uses its TCON output in place of the LVDS transmitter output. The ADV7186BBCZ-TL variant is a reduced-function version that does not support external SDRAM, so it is not a function-for-function substitute for a design that depends on external memory.

Typical applications include analog video capture for industrial vision systems, CCTV and surveillance display chains, broadcast and professional video equipment, automotive or embedded displays using analog sources, and LCD-panel interfaces requiring integrated timing and backlight control. Designers should confirm signal amplitudes, supported input resolutions, external-memory requirements, and panel timing before assigning the device to a specific product architecture.

When laying out a 196-CSPBGA design, follow the manufacturer land pattern, ball assignments, and high-speed routing guidance. The analog input and digital output interfaces have different layout sensitivities, so keep analog traces short, provide a continuous ground reference, and control return paths beneath high-speed digital signals. Confirm the complete power, clock, and interface requirements against the ADV7186 datasheet before schematic release.

This product summary consolidates the exact device identity, package information, supported video standards, interface features, family distinctions, and practical design considerations. It also identifies the closest same-family options and clarifies which variants alter LVDS, SDRAM, or external-memory behavior, helping engineers narrow PCB-compatible sourcing options without overlooking functional differences.

Pilihan pengganti yang segera untuk ADV7186BBCZ-T-RL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADV7186BBCZ-T-RL (sama faktor bentuk dan kaki) — berbeza dalam LVDS Receiver, LVDS Transmitter, Package, Product Type.

Analog Devices
LVDS Receiver: Integrated LVDS Rx
LVDS Transmitter: Integrated LVDS Tx using OpenLDI mapping
Package: 196-CSPBGA, 12 x 12 mm
Bandingkan Dengan ADV7186BBCZ-T-RL →

ADV7186BBCZ-TL-RL

✅ Masuk Drop-In
Analog Devices
📦 196-CSPBGA (12 x 12 mm)
Video decoder · NTSC, PAL, SECAM · 10 bit · 1 channel · 24 bit · 1 channel · TCON output · Supported by the ADV7186 family

Hubungi untuk harga

Lihat Datasheet →

ADV7186BBCZ-RL

✅ Masuk Drop-In
📦 196-CSPBGA (12 x 12 mm)
Automotive AEC-Q100 qualification is identified for this variant while retaining one 10-bit ADC, NTSC/PAL/SECAM support, and the 196-CSPBGA package

📋 Alternatif rujukan (tidak dalam katalog)

ADV7186BBCZ

✅ Masuk Drop-In
Analog Devices
📦 196-CSPBGA (12 x 12 mm)
Multiformat video decoder and processor · NTSC, PAL, SECAM · Single high-speed 10-bit ADC · Flexible 24-bit pixel output interface · Integrated LVDS Tx using OpenLDI mapping · Integrated LVDS Rx · BT.656 output channel · Timing controller (TCON) for LCD panels

Hubungi untuk harga

Lihat Datasheet →

ADV7186BBCZ-T-RL Spesifikasi

Product Type Video decoder and display processor
Supported Video Standards NTSC, PAL, SECAM
ADC Resolution 10 bit
ADC Count 1 ADC
Digital Pixel Output Flexible 24-bit pixel output interface
Parallel Video Output Independent BT.656 output channel
LCD Timing Control TCON output for LCD panels
Backlight Control PWM backlight control
Control Interface Analog voltage
Input Resolution Support Up to SVGA
LVDS Transmitter Not supported in the -T configuration
LVDS Receiver Not supported in the -T configuration
External SDRAM Support Supported by ADV7186BBCZ-T
Kemasan 196-CSPBGA (12 x 12 mm)
Jenis Pemasangan Surface mount
Packaging Tape and reel

Panduan Konfigurasi Pin ADV7186BBCZ-T-RL 196-cspbga (12 x 12 mm)

Konfigurasi pin untuk ADV7186BBCZ-T-RL (196-cspbga (12 x 12 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 196-cspbga (12 x 12 mm) untuk ADV7186BBCZ-T-RL

Tiada data garisan pin yang diperoleh untuk ADV7186BBCZ-T-RL.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADV7186BBCZ-T-RL patut untuk 6 aplikasis: Industrial Vision Display Interface, CCTV Surveillance Display, Broadcast and Professional Video, Automotive Analog Video Display, Embedded LCD Control, Legacy Video Conversion System.

🏭

Industrial Vision Display Interface

The ADV7186BBCZ-T-RL fits legacy analog inspection and machine-vision display systems that decode NTSC, PAL, or SECAM video while presenting pixels through a digital LCD interface. Its single 10-bit ADC handles analog digitization, while the flexible 24-bit pixel output transfers decoded image data to downstream logic or display timing. The -T configuration's TCON output and PWM backlight control reduce the need for separate panel-interface circuitry. The main engineering consideration is confirming that the source amplitude, resolution, pixel timing, and external-memory architecture match the target board, especially because the -T family does not provide LVDS Tx or Rx.

🎥

CCTV Surveillance Display

The ADV7186BBCZ-T-RL is appropriate for surveillance equipment that accepts composite analog camera video and drives a local LCD or embedded display. It decodes NTSC, PAL, and SECAM through one 10-bit ADC and exposes a flexible 24-bit digital pixel stream plus an independent BT.656 output. The integrated TCON output and PWM backlight control are useful for panel timing and illumination control, while the 196-CSPBGA package supports compact multi-function boards. Before schematic capture, verify the analog input bandwidth, supported input resolution, panel voltage requirements, and whether the system needs LVDS rather than the -T configuration's TCON output.

📺

Broadcast and Professional Video

The ADV7186BBCZ-T-RL can serve as the analog-to-digital bridge in broadcast, professional video, and legacy production equipment that must accept multiple television standards. NTSC, PAL, and SECAM support reduces the need to select a separate decoder for each format, while the 10-bit ADC provides the documented analog front end. Its flexible 24-bit pixel interface supports digital processing paths, and the independent BT.656 output can serve compatible downstream video logic. The design should allocate careful board area to the large 196-CSPBGA package and verify clocking, synchronization, blanking, and pixel-format requirements against the manufacturer timing specifications.

🚗

Automotive Analog Video Display

The ADV7186BBCZ-T-RL can be evaluated for automotive or vehicle-display systems that receive analog camera video and require local panel timing and backlight control. It decodes NTSC, PAL, and SECAM and combines the analog front end, digital pixel output, TCON output, and PWM backlight-control functions. These capabilities fit display chains where an LVDS-only interface would add unnecessary conversion stages. Automotive deployment additionally requires selection of the appropriately qualified family variant and verification of temperature, electromagnetic compatibility, functional safety, and supplier requirements. The -T configuration should be used only when its TCON interface and SDRAM behavior match the intended architecture.

📱

Embedded LCD Control

The ADV7186BBCZ-T-RL is well matched to embedded LCD systems that receive decoded analog video and require panel timing plus PWM backlight control from one device. The flexible 24-bit pixel output provides a digital video path, the BT.656 channel supports compatible parallel processing, and the TCON output handles the LCD timing-controller role. Integrating these functions can reduce board partitioning around legacy analog-video sources. Because the device occupies a 196-CSPBGA package, layout planning should begin early, with dedicated attention to analog input routing, clock integrity, power distribution, and ball-escape feasibility before committing to the board outline.

🖥️

Legacy Video Conversion System

The ADV7186BBCZ-T-RL supports legacy video conversion systems that must bridge NTSC, PAL, or SECAM sources to modern digital processing. Its single 10-bit ADC digitizes the analog front end, and its 24-bit flexible pixel output provides a configurable digital handoff to FPGA, processor, or display logic. The independent BT.656 output offers an alternative path for compatible receivers. This makes the device useful in test equipment, video capture cards, and industrial conversion products where a single board must accept several regional video formats. Validate input sync behavior, supported resolutions, pixel-clock range, and output timing before releasing the design.

What is the ADV7186BBCZ-T-RL?
The ADV7186BBCZ-T-RL is an Analog Devices single-chip multiformat video decoder and display processor for NTSC, PAL, and SECAM video. It combines one 10-bit ADC with a flexible 24-bit pixel output, an independent BT.656 output channel, LCD timing control, and PWM backlight control in a 196-CSPBGA package. According to the Analog Devices ADV7186 datasheet, it is intended for analog-video decoding and display-interface applications.
What video standards does the ADV7186BBCZ-T-RL support?
The ADV7186BBCZ-T-RL supports NTSC, PAL, and SECAM analog video standards. Its single 10-bit ADC forms the analog front end used to digitize the incoming analog signal before decoding and digital output. The Analog Devices product page and ADV7186 datasheet identify these standards as core functions of the device family, making it suitable for legacy composite-video capture and display systems.
Where can I download the ADV7186BBCZ-T-RL datasheet PDF?
The official ADV7186BBCZ-T-RL datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7186.pdf. The manufacturer product page at https://www.analog.com/en/products/adv7186.html provides family information and links to product documentation. Use the manufacturer PDF for the complete pin descriptions, electrical characteristics, register information, and application guidance.
Where can I find the ADV7186BBCZ-T-RL pinout?
The ADV7186BBCZ-T-RL pin assignment is shown in the pin-description table and package drawing in the Analog Devices ADV7186 datasheet. The device uses a 196-CSPBGA package, so its 196 ball positions must be assigned from the manufacturer diagram rather than inferred from a generic package symbol. Use the ball table to identify supplies, grounds, analog inputs, clocks, control signals, and digital outputs.
Can the ADV7186BBCZ-TL-RL replace the ADV7186BBCZ-T-RL?
The ADV7186BBCZ-TL-RL is not a full drop-in replacement for the ADV7186BBCZ-T-RL because the -TL version is a reduced-function device that does not support external SDRAM. Both use the 196-CSPBGA package, and the -TL retains the -T family's TCON-oriented feature set. A design that uses external SDRAM should retain the ADV7186BBCZ-T-RL unless the memory interface is redesigned.
What is the difference between ADV7186BBCZ-T-RL and ADV7186BBCZ-RL?
The ADV7186BBCZ-T-RL provides the -T configuration with TCON output and no LVDS transmitter, while the ADV7186BBCZ-RL is identified as the automotive AEC-Q100 version in the family comparison. Both are described as 196-CSPBGA video decoders with one 10-bit ADC and NTSC, PAL, and SECAM support. Qualification and LVDS population differ, so automotive suitability and schematic requirements should drive the final choice.
When should I choose the ADV7186BBCZ-T-RL over the base ADV7186BBCZ?
Choose the ADV7186BBCZ-T-RL when the display design needs TCON output and PWM backlight control but does not need the base device's LVDS transmitter. The base ADV7186BBCZ supports LVDS Tx and LVDS Rx, whereas the -T version provides TCON output instead of LVDS Tx and omits LVDS Rx. Select the variant by matching the display interface first, then verify timing, supply, and analog-video requirements.
Is the ADV7186BBCZ-T-RL suitable for an LCD panel with PWM backlight?
The ADV7186BBCZ-T-RL is suitable for compatible LCD timing-controller and PWM backlight-control designs because its -T configuration includes TCON output and a PWM backlight-control function. The device also provides a flexible 24-bit pixel output and an independent BT.656 output. Panel compatibility still depends on electrical timing, interface voltage, resolution, and pin-level requirements in the manufacturer datasheet.
What are the key specifications of ADV7186BBCZ-T-RL that engineers should know?
The key ADV7186BBCZ-T-RL specifications are NTSC, PAL, and SECAM decoding, one 10-bit ADC, a flexible 24-bit pixel output, an independent BT.656 channel, analog-voltage control, TCON output, PWM backlight control, and a 196-CSPBGA 12 x 12 mm package. The Analog Devices ADV7186 datasheet also distinguishes this -T configuration by its lack of LVDS Tx and LVDS Rx functions.
What can replace the ADV7186BBCZ-T-RL?
The closest listed replacement candidates are the ADV7186BBCZ-TL-RL, ADV7186BBCZ-RL, and base ADV7186BBCZ family options, but each requires schematic verification rather than unconditional substitution. The -TL removes external SDRAM support, while the base and automotive versions differ in LVDS population or qualification. Confirm every used ball, power rail, interface function, and timing requirement before approving a replacement.
What is the best Analog Devices equivalent for ADV7186BBCZ-T-RL?
The closest Analog Devices equivalent is generally the ADV7186BBCZ-TL-RL when the design does not require external SDRAM, because it retains the TCON-oriented -T feature set and uses the same 196-CSPBGA package. It is not equivalent for circuits using external memory. The ADV7186BBCZ-RL is a better candidate when automotive qualification is required, subject to checking its LVDS and interface differences.
Is there a cross-brand drop-in replacement for ADV7186BBCZ-T-RL?
No cross-brand drop-in replacement is established for the ADV7186BBCZ-T-RL. The available cross-reference material identifies Analog Devices family members but does not document a competitor device with the same 196-CSPBGA footprint, pin assignments, and TCON, BT.656, backlight, and memory-interface behavior. The Request a Quote form on this page can be used to request sourcing support for an approved second source.
Where to buy ADV7186BBCZ-T-RL online?
Use the Request a Quote form on this page to request the ADV7186BBCZ-T-RL with the required package, reel quantity, and delivery schedule. The device is a 196-CSPBGA tape-and-reel part, so confirm reel dimensions, moisture handling, quantity per reel, and your production volume before ordering. Current commercial terms and availability should be confirmed through the quote process rather than inferred from an index page.
What is the price of ADV7186BBCZ-T-RL?
The current commercial price for the ADV7186BBCZ-T-RL depends on order quantity, reel format, delivery location, and component availability. Submit the Request a Quote form on this page with the required quantity and target date to obtain a current quotation. The quoted part must match the exact 196-CSPBGA tape-and-reel ordering code rather than a related ADV7186 family member.
What is the lead time and stock status for ADV7186BBCZ-T-RL?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Lead time for a 196-CSPBGA video processor can depend on wafer availability, assembly, test capacity, and reel packaging. Because availability changes, provide your required quantity, ship-to country, and production schedule when requesting a commitment.
How much power does the ADV7186BBCZ-T-RL consume?
The exact power consumption depends on supply voltage, selected decoder configuration, clock rate, digital interface activity, and enabled output functions. The Analog Devices ADV7186 datasheet is the controlling source for supply currents and power dissipation. Calculate board-level demand from the operating mode rather than using a single nominal figure, and account separately for regulator and ADC reference power in the system thermal budget.
Is the ADV7186BBCZ-T-RL RoHS compliant?
The RoHS classification must be confirmed in the current Analog Devices product documentation for the exact ordering code. The family includes automotive and standard variants, so qualification information should not be transferred automatically between orderable MPNs. Use the manufacturer's material-declaration or product-compliance documentation for the formal compliance statement and request a copy through the quote process when documentation is required for procurement.

Data referensi kejuruteraan untuk ADV7186BBCZ-T-RL — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADV7186BBCZ-T-RL for an analog-video display design that needs NTSC, PAL, and SECAM decoding together with LCD timing control and PWM backlight control. Its one 10-bit ADC, flexible 24-bit pixel output, independent BT.656 channel, and 196-CSPBGA package provide a consolidated interface solution. Choose ADV7186BBCZ-TL-RL only when external SDRAM is unnecessary and the reduced-function implementation is acceptable. Consider ADV7186BBCZ-RL when automotive AEC-Q100 qualification is required, after checking all interface differences against the intended schematic. Use the base ADV7186BBCZ when the design specifically requires LVDS Tx or Rx rather than the -T configuration's TCON output. No competitor cross-reference establishes a true cross-brand drop-in substitute, so any second-source approach should be treated as a new engineering qualification rather than a simple replacement.

Perbandingan dengan Gantian

Parametr Produk Ini ADV7186BBCZ-TL-RL ADV7186BBCZ-RL ADV7186BBCZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 196-CSPBGA (12 x 12 mm) 196-CSPBGA (12 x 12 mm) - same package 196-CSPBGA (12 x 12 mm) - same package 196-CSPBGA (12 x 12 mm) - same package
Product Function Video decoder and display processor Video decoder and display processor Video decoder and display processor Video decoder and display processor
Supported Video Standards NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM
ADC Configuration 1 ADC, 10-bit 1 ADC, 10-bit 1 ADC, 10-bit 1 ADC, 10-bit

Penyeberangsung Jelas

  • TCON-oriented -T configuration (vsADV7186BBCZ)
  • External SDRAM capability retained (vsADV7186BBCZ-TL-RL)
  • Automotive-qualified family alternative (vsADV7186BBCZ-RL)
  • Compact integration of decoding and panel control (vsADV7186BBCZ)

Catatan Desain

The 196-CSPBGA package requires early land-pattern and escape-planning work. Follow the Analog Devices package drawing for ball locations, solder-mask design, paste volume, and board-level thermal-via requirements. Reserve continuous supply and ground planes, place decoupling capacitors at the associated balls, and avoid routing sensitive analog inputs beneath high-speed digital clocks or pixel outputs.

Separate the analog-video input path from digital pixel, clock, and memory routing. Keep the analog input traces short, reference the analog ground plane cleanly, and avoid splitting return paths beneath high-speed interfaces. Use the datasheet's recommended termination and component placement around the analog front end, and keep the LCD timing and BT.656 outputs routed according to their clock and impedance requirements.

Do not select the ADV7186BBCZ-TL-RL as an automatic substitute when the original design uses external SDRAM; the -TL configuration removes that support. Likewise, the base ADV7186BBCZ differs by LVDS Tx and Rx population. Before replacing a component, compare every connected ball, power rail, clock input, control signal, analog input, digital output, and panel-timing function against the manufacturer pin table.

Use the manufacturer's clock, pixel-rate, and output-interface guidance to establish trace lengths, terminations, and routing topology for the selected pixel or BT.656 path. Avoid adding arbitrary series resistance or changing termination values without checking the supported interface mode. Validate eye quality and timing at the intended pixel clock, paying particular attention to simultaneous switching activity around the large BGA power and ground structure.

Calculate regulator capacity from the ADV7186BBCZ-T-RL's worst-case supply current in the selected clock and interface mode rather than a nominal operating value. Include digital-output activity, analog front end, and external circuitry when sizing the supply. Verify local capacitor placement and power-source impedance against the datasheet because inadequate high-frequency decoupling can degrade video timing and analog signal quality.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Exact-order-code compliance declarations were not included in the product references. The ADV7186BBCZ-RL family entry is identified as automotive AEC-Q100, but that qualification must not be assigned to the target MPN without its own declaration.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADV7186BBCZ-T-RL datasheet ADV7186BBCZ-T-RL datasheet pdf ADV7186BBCZ-T-RL pinout ADV7186BBCZ-T-RL equivalent ADV7186BBCZ-T-RL replacement ADV7186BBCZ-T-RL cross reference ADV7186BBCZ-T-RL price ADV7186BBCZ-T-RL stock Analog Devices ADV7186BBCZ-T-RL ADV7186BBCZ-T-RL vs ADV7186BBCZ ADV7186BBCZ-T-RL 196 CSPBGA ADV7186BBCZ-T-RL video decoder

Komponen dan Tanda berkaitan

Analog Devices ADV7186BBCZ-T-RL ADV7186BBCZ-TL-RL ADV7186BBCZ-RL ADV7186BBCZ ADV7186 Video decoder Display processor Video processing IC Interface IC NTSC PAL SECAM 10-bit ADC 24-bit pixel output BT.656 TCON LCD timing controller PWM backlight control OpenLDI LVDS transmitter LVDS receiver External SDRAM 196-CSPBGA Surface mount
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ