ATF22LV10CZ-25PI - 25ns 10-Macrocell Flash PLD | Microchip
MPN: ATF22LV10CZ-25PI ✗ Akhir HayatATF22LV10CZ-25PI Ringkasan
A simple programmable logic device, or SPLD, is a programmable-logic IC that combines a fixed collection of AND-array and OR-array logic resources with user-programmable configuration data. Within the broader hierarchy, an SPLD is a programmable logic device, a form of digital logic IC, and a member of the semiconductor family used for control, decoding, interface, and fixed-function logic implementation. Unlike a microcontroller or DSP, its principal role is deterministic combinational and registered logic rather than software-driven sequential processing.
The ATF22LV10CZ-25PI provides 10 macrocells and approximately 500 gates in a 24-pin PDIP package. Its 25 ns speed grade supports moderate timing requirements, while its electrically erasable Flash configuration allows a device to be programmed, erased, and reused without a separate UV-erasable memory process. The manufacturer datasheet identifies operation from 3.0 V to 5.5 V and a maximum standby current of 25 µA.
Technically, the CZ/CQZ family combines CMOS logic with electrically erasable Flash memory and keeper circuits on input and output pins. Keeper circuits preserve previous logic states during idle periods, reducing the static power otherwise required by external pull-up resistors. This characteristic is useful in designs where many PLD inputs may remain inactive for extended periods and where predictable power behavior matters.
Typical uses include industrial control decoding, legacy peripheral interfacing, programmable address and command decoding, compact glue-logic implementation, and retrofit maintenance of equipment that already uses a 24-pin PDIP footprint. Because the ATF22LV10CZ-25PI is a Flash-based SPLD, it is particularly suitable for prototypes and production systems requiring field-reconfigurable logic without relying on one-time-programmable devices.
The principal design consideration is supply compatibility. Although the device supports operation down to 3.0 V, the surrounding legacy circuit may use 5 V logic, and input and output levels must be checked against the manufacturer specifications. Programming should follow the official ATF22V10C-family procedure, including correct supply sequencing, interface timing, and device configuration checks.
This product record combines the device architecture, package information, electrical characteristics, drop-in candidates, application guidance, and engineering considerations needed to evaluate an ATF22LV10CZ-25PI for an existing 24-pin PDIP design.
Pilihan pengganti yang segera untuk ATF22LV10CZ-25PI — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATF22LV10CZ-25PI (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Maximum Clock Frequency, Standby Current, Supply Voltage Range.
ATF22LV10CZ-25PC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATF22LV10CQZ-30PC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATF22LV10CZ-25PI Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Electrically Erasable CMOS Programmable Logic Device |
| Series | ATF22V10C |
| Macrocells | 10 macrocells |
| Logic Capacity | 500 gates |
| Propagation Delay | 25 ns |
| Tegangan Pemberi Arus Operasi | 3.0 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V to 5 V |
| Standby Current | 25 µA maximum |
| Maximum Frequency | 62.5 MHz |
| Configuration Memory | Electrically Erasable Flash memory |
| Process Technology | CMOS |
| Temperature Grade | Industrial grade |
| Kemasan | 24-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Kiraan Pin | 24 pins |
| Output Pin Keeper | Yes |
Panduan Konfigurasi Pin ATF22LV10CZ-25PI 24-pin pdip
Konfigurasi pin untuk ATF22LV10CZ-25PI (24-pin pdip pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATF22LV10CZ-25PI.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATF22LV10CZ-25PI patut untuk 6 aplikasis: Industrial Control Decoding, Peripheral Interface Glue Logic, Legacy Equipment Maintenance, Programmable Address Mapping, Power Sequencing and Interlock Logic, Retrofit Communication Interface.
Industrial Control Decoding
The ATF22LV10CZ-25PI fits legacy industrial control boards that require deterministic command, address, or machine-state decoding near a microcontroller or microprocessor. Its 10 macrocells and approximately 500 gates provide enough programmable Boolean capacity for several related decode paths without introducing software overhead. The 25 ns propagation delay supports moderate-speed control sequencing across a 3.0 V to 5.5 V range. In a through-hole design, the 24-pin PDIP package simplifies repair and preserves compatibility with established component positions. Engineers should define every output state, account for the device's power-up configuration behavior, and validate timing against the slowest participating control signal.
Disebarkan
Peripheral Interface Glue Logic
The ATF22LV10CZ-25PI can implement protocol formatting, latch functions, arbitration, and signal conditioning between a host processor and a legacy peripheral. Ten macrocells are sufficient for compact multi-signal logic blocks when the design does not require a processor or FPGA. Its Flash configuration allows the interface logic to be updated during maintenance without replacing the PCB. The 3.0 V minimum operating voltage permits use in mixed-voltage legacy equipment, although every connected signal must satisfy the corresponding input and output thresholds. Designers should use the manufacturer programming and pin-assignment instructions, then verify propagation delay against the peripheral's setup and hold requirements.
Disebarkan
Legacy Equipment Maintenance
The ATF22LV10CZ-25PI is useful for maintaining equipment built around through-hole programmable logic, where modern plastic or leadless packages would require impractical board changes. Its 24-pin PDIP outline fits the established footprint, while electrically erasable Flash configuration permits field reprogramming when logic corrections are required. The industrial temperature designation and 25 ns speed grade suit many control and instrument subsystems. A maintenance design should confirm that the replacement ordering code has the required temperature range, supply behavior, and programming compatibility. Designers should also check availability of the associated fuse, programming adapter, and obsolete-system documentation before committing to a repair program.
Disebarkan
Programmable Address Mapping
The ATF22LV10CZ-25PI can implement address decode, chip-select generation, interrupt routing, and register-access control in a compact embedded control system. Ten macrocells and approximately 500 gates allow multiple related Boolean decisions to be consolidated in one programmable device. The 25 ns propagation delay is suitable when the host bus operates at moderate speed and the decoded outputs do not participate in a critical high-speed feedback loop. Because the device supports 3.0 V to 5.5 V operation, it can fit 3.3 V and 5 V legacy subsystems, subject to signal-level checks. PCB designers should reserve programming access and validate every inactive or power-up state in the implemented Boolean equations.
Disebarkan
Power Sequencing and Interlock Logic
The ATF22LV10CZ-25PI can implement deterministic interlocks, relay-command qualification, fault-latch logic, and sequencing gates in industrial equipment. The 10-macrocell capacity is useful when several Boolean conditions must be combined before an actuator or power stage is enabled. Its maximum standby current of 25 µA helps limit static consumption during inactive periods, while keeper circuitry holds previous logic states on idle pins. The 24-pin PDIP package remains practical for repairable industrial control hardware. Timing analysis should include the 25 ns propagation delay plus external gate and interface delays. Safety-related outputs also require independent review of fail-safe behavior, component derating, and regulatory system requirements.
Disebarkan
Retrofit Communication Interface
The ATF22LV10CZ-25PI can provide fixed-format data masking, parity generation, command translation, and handshake logic around older communication controllers. Its electrically erasable Flash configuration makes it useful for retrofit programs in which field updates are valuable, while the 25 ns delay supports moderate bus and peripheral rates. The device can operate down to 3.0 V, which helps bridge eras in mixed 3.3 V and 5 V equipment. Engineers must confirm direction, pull-state, and interface compatibility using the manufacturer pin description. The final design should be tested with reset, idle, and disconnected conditions because programmable logic outputs may have requirements for external keeper or pull components.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATF22LV10CZ-25PI — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATF22LV10CZ-25PC | ATF22LV10CQZ-30PC |
|---|---|---|---|
| Package | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | Electrically erasable CMOS PLD | Electrically erasable CMOS SPLD | Electrically erasable CMOS SPLD |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Logic Capacity | 500 gates | 500 gates | 500 gates |
| Propagation Delay | 25 ns | 25 ns | 30 ns |
| Configuration Memory | Electrically erasable Flash memory | Flash PLD | Flash PLD |
Penyeberangsung Jelas
- Faster timing grade than the CQZ-30PC candidate (vsATF22LV10CQZ-30PC)
- Industrial-grade 24-pin through-hole option (vsATF22LV10CQZ-30PC)
- Closest identified ordering-code match (vsATF22LV10CZ-25PC)
Catatan Desain
Design the supply rail to remain within the manufacturer's 3.0 V to 5.5 V operating range, including tolerance, startup transients, and ripple. Although the device specifies a maximum standby current of 25 µA, active current depends on the programmed logic and switching activity. Place the required decoupling capacitor close to the supply and ground pins, and verify the final rail behavior under both idle and maximum-transition conditions before power-sequencing other devices.
Retain the original 24-pin PDIP footprint when replacing ATF22LV10CZ-25PI. Confirm pin numbering against the manufacturer pin-configuration table rather than relying on a visual socket orientation alone. Keep programming-interface traces accessible if the board uses a fixture, and maintain adequate clearance between adjacent through-hole leads. For new layouts, verify every pin assignment, including clock, control, input, output, and programming functions, before fabrication.
Include the 25 ns propagation delay in the timing budget for every combinational path. Check setup and hold requirements at connected flip-flops, counters, transceivers, and asynchronous control inputs rather than treating the PLD delay as the complete path delay. Inputs should also be evaluated for transition requirements and unused-pin states. Keeper circuitry preserves previous logic levels during idle periods, but external pull components may still be needed where a defined state is required during reset or initial power-up.
Do not substitute a device solely because it uses the same 24-pin PDIP outline. Verify macrocell count, speed grade, supply range, temperature grade, configuration technology, programming interface, and power behavior. The ATF22LV10CZ-25PC is the closest identified option, while the ATF22LV10CQZ-30PC has a 30 ns delay. Program and test the replacement in the complete target circuit, including reset, power-up, idle, and worst-case transition states.
Maklumat Kesediaan
The device is identified as industrial grade, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this ordering code.