ATF22V10BQL-20PC 20ns 10-Macrocell EE PLD | Microchip
MPN: ATF22V10BQL-20PC ✗ Akhir HayatATF22V10BQL-20PC Ringkasan
An electrically erasable programmable logic device, or EE PLD, is a semiconductor that stores configurable Boolean logic in nonvolatile memory. It occupies the logic-IC branch of the broader integrated-circuit hierarchy and provides a compact alternative to a collection of individual gates. Unlike mask-programmed devices, an EE PLD can be reprogrammed during development, production setup, or field maintenance without replacing the integrated circuit.
The ATF22V10B family provides 10 macrocells, a 20 ns speed grade for this ordering code, and 5 V CMOS operation. Its electrically erasable Flash technology supports nonvolatile configuration retention, while the 10 mA low-power family option addresses designs in which supply current is important. The 24-pin PDIP package uses a 0.300-inch, 7.62 mm pitch according to the product listing data.
Technically, the ATF22V10B is structured for compact combinational and registered logic implementation. Each macrocell supports the programmable logic resource required by the 22V10 architecture, allowing common control, decoding, state-machine, and glue-logic functions to be consolidated into one package. Because the target is a legacy EE PLD, engineers should confirm the programmed JEDEC fuse map, timing limits, and pin behavior against the manufacturer datasheet before modifying an existing design.
Typical uses include industrial controller address decoding, legacy interface adaptation, sequencing logic, programmable pulse generation, and small embedded control systems. The 24-pin PDIP package is particularly useful where plug-in IC sockets, through-hole assembly, or field replacement are preferable to a fine-pitch surface-mount footprint.
The primary design constraint is supply compatibility. The ATF22V10B family specifies 5 V operation, with tolerance ranges that depend on the device grade. Existing boards should also be checked for timing, macrocell allocation, and programming-file compatibility before substituting another PLD. A modern microcontroller or CPLD may offer more resources, but it can require a different package, firmware workflow, and board-level pin assignment.
This product record combines the verified device identity, package, speed, macrocell, memory-technology, and family operating characteristics with practical selection guidance, qualification boundaries, and drop-in alternatives. Engineers can compare package-compatible options while using the manufacturer datasheet and programmed-device documentation as the final authority for design implementation.
Pilihan pengganti yang segera untuk ATF22V10BQL-20PC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
ATF22V10BQL-20PI
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10BQL-20PU
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10CQZ-20PU
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10BQL-20PC Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | High-performance electrically erasable programmable logic device (EE PLD) |
| Product Family | ATF22V10B |
| Macrocells | 10 macrocells |
| Target Speed Grade | 20 ns |
| Memory Technology | Electrically erasable Flash memory |
| Process Technology | CMOS |
| Nominal Supply Voltage | 5 V |
| Commercial-Grade Supply Range | 5 V ± 5% |
| Military and Industrial Supply Range | 5 V ± 10% |
| Family Minimum Speed | 7.5 ns |
| Family Minimum Power Dissipation | 10 mA |
| Kemasan | 24-pin PDIP |
| Package Pitch | 0.300 in (7.62 mm) |
| Jenis Pemasangan | Through-hole |
| Logic Family | ATF22V10B 22V10 series |
| Configuration Retention | Nonvolatile electrically erasable Flash configuration |
Panduan Konfigurasi Pin ATF22V10BQL-20PC 0.300 in (7.62 mm)
Konfigurasi pin untuk ATF22V10BQL-20PC (0.300 in (7.62 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATF22V10BQL-20PC.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATF22V10BQL-20PC patut untuk 6 aplikasis: Industrial Address Decoding, Legacy Equipment Repair, Programmable Sequence Control, Interface Signal Conditioning, Instrumentation Control Panel, Prototyping Glue Logic.
Industrial Address Decoding
The ATF22V10BQL-20PC can consolidate legacy memory-mapped address decoding into one 10-macrocell EE PLD while preserving the 20 ns speed class of the original system. Its electrically erasable Flash configuration allows logic changes without replacing the device, which is useful during maintenance of industrial controllers. The 24-pin PDIP package simplifies retrofit work on through-hole boards. Before inserting it into a control system, verify the supply voltage, existing fuse map, timing margin, and ambient-temperature requirements.
Disebarkan
Legacy Equipment Repair
The ATF22V10BQL-20PC is suited to repairing older control and instrumentation equipment that uses a 24-pin PDIP EE PLD. Its 10 macrocells can reproduce the original decoding, latching, and sequencing behavior without redesigning the surrounding board. The nonvolatile Flash configuration permits a programmed replacement to be installed and retained in service. Repair engineers should compare the device marking, programming file, pin table, and timing requirements before fitting the part to avoid introducing a subtle logic-state mismatch.
Disebarkan
Programmable Sequence Control
A 10-macrocell ATF22V10BQL-20PC can implement compact state sequencing, output interlocks, timing windows, and event-order logic where the original design was built around the 22V10 architecture. The 20 ns device speed supports the family's documented logic-performance range, while electrically erasable Flash permits configuration updates during maintenance. Because legacy PLD timing is usually defined by product terms and system margins, validate the original programmed equations and propagation requirements rather than assuming identical behavior from a differently suffixed replacement.
Disebarkan
Interface Signal Conditioning
The ATF22V10BQL-20PC can implement protocol-specific gating, latch sequencing, and format conversion around legacy sensors and actuators. Its 10 macrocells provide a practical capacity for short state machines and discrete logic transformations, and the 24-pin PDIP package fits older through-hole interface boards. Configuration stored in electrically erasable Flash makes the part convenient for field updates after a controlled logic revision. The design must still account for the PLD's supply tolerance, I/O behavior, propagation delay, and unused input states.
Disebarkan
Instrumentation Control Panel
For legacy instrumentation and control panels, the ATF22V10BQL-20PC can consolidate mode selection, indicator timing, alarm interlocks, and front-panel decoding into a single programmable logic device. The 24-pin PDIP format is useful for repairable, socketed assemblies and prototypes, while nonvolatile Flash simplifies retention of a validated configuration. Designers should preserve the original programming file, compare all package pins with the manufacturer pin table, and test unused inputs for defined levels to prevent intermittent control-panel behavior.
Disebarkan
Prototyping Glue Logic
The ATF22V10BQL-20PC provides a practical way to prototype compact glue logic around a legacy microcontroller, memory, or peripheral set without immediately committing to a custom mask part. Ten macrocells are sufficient for address qualification, command decoding, handshake logic, and small state machines, and the device can be reprogrammed as the interface evolves. The 24-pin PDIP package also permits socket-based experimentation. Finalization requires a timing review, unused-pin treatment, supply-noise assessment, and confirmation that the programmed file is compatible with the selected production suffix.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATF22V10BQL-20PC — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATF22V10BQL-20PI | ATF22V10BQL-20PU | ATF22V10CQZ-20PU |
|---|---|---|---|---|
| Package | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP | 24-pin PDIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | ATF22V10B | ATF22V10B | ATF22V10B | ATF22V10C |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
Penyeberangsung Jelas
- Retains the established ATF22V10B programming architecture (vsATF22V10CQZ-20PU)
- Commercial 20 ns option with a direct 24-pin PDIP footprint (vsATF22V10BQL-20PI)
- Package-compatible service option for legacy through-hole assemblies (vsATF22V10BQL-20JC)
Catatan Desain
Design the 5 V supply path to remain within the ATF22V10B family's permitted voltage range for the selected temperature grade. The manufacturer describes commercial operation at 5 V ± 5% and military or industrial operation at 5 V ± 10%. Place local supply decoupling near the device and include adequate logic-high and logic-low levels at every connected input. Do not use the PLD supply pin to compensate for a marginal board rail.
Treat the programmed configuration as part of the device identity. Before replacing ATF22V10BQL-20PC, compare the fuse map, pin descriptions, product terms, propagation delays, and unused-pin states with the original component. A matching package does not by itself guarantee identical behavior between ATF22V10B and ATF22V10C revisions. Archive the validated programming file and test the replacement in the intended input and output states.
Use the manufacturer's 24-pin PDIP pin-description table when assigning tracks and socket orientation. The 0.300-inch, 7.62 mm pitch requires correct drill and pad alignment, while socket use can improve serviceability in legacy equipment. Maintain clearances between adjacent signals, provide a reliable ground return, and avoid long unprotected routes that could couple noise into high-impedance control inputs. Confirm orientation markings physically because DIP numbering follows the package notch convention.
Review every unused input and output against the device's documented pin behavior. Leaving unused inputs floating can create indeterminate internal states and unnecessary switching activity, especially in a legacy control system with long PCB routes. Tie unused inputs to a valid inactive level only as directed by the pin table and device documentation. For repaired boards, inspect sockets and oxidation because intermittent input levels can appear as PLD logic failures even when the replacement IC is correct.
Maklumat Kesediaan
No exact-MPN RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The ATF22V10B family is a legacy programmable-logic product, so the exact ordering code and current manufacturer documentation should be reviewed before making a compliance claim.