ATF22V10CZ-15SI - 15ns CMOS PLD, 10 Macrocells | Microchip
MPN: ATF22V10CZ-15SI ✓ AktifATF22V10CZ-15SI Ringkasan
A programmable logic device is a semiconductor that stores a Boolean logic configuration in nonvolatile memory. The ATF22V10CZ family belongs to the simple PLD hierarchy, where each macrocell combines AND-array logic with programmable output functions. This makes the device suitable for compact control, decoding, interface, and glue-logic functions where a small FPGA or microcontroller would be unnecessarily complex.
Key features include a 15 ns speed grade, 10 macrocells, a nominal 5 V supply, CMOS- and TTL-compatible inputs and outputs, and electrically erasable reprogrammable Flash memory. The manufacturer describes zero-power operation in which standby current can remain as low as 25 microamperes when input transition detection is active. Its 24-SOIC package supports conventional surface-mount assembly while exposing the device’s I/O and configuration pins.
The ATF22V10 architecture supports compact implementation of registered or combinational logic using industry-standard PLD design tools. A 15 ns grade is useful for moderate control and interface timing rather than high-speed synchronous systems. Zero-power operation helps reduce dynamic activity when input signals remain stable, although board-level behavior still depends on the programmed equations, output loading, supply voltage, and switching frequency.
Typical uses include industrial control logic, peripheral decoding, status and alarm logic, display and communication interfaces, and legacy equipment. ATF22V10-based designs can also implement bus decoding, latch functions, pulse conditioning, and small state machines where a dedicated microcontroller would add unnecessary cost or board area.
When designing a replacement, verify the exact package, speed grade, temperature grade, programming architecture, and power behavior in the manufacturer datasheet. A board-level substitute is only drop-in when its pin assignments, macrocell structure, programming algorithm, and electrical timing match the original device.
This page organizes the device specifications, verified manufacturer and distributor references, same-footprint alternatives, selection guidance, and practical implementation considerations. The comparison focuses on package, speed, macrocell capacity, supply voltage, temperature grade, and programming compatibility so engineers can identify an interchange candidate without relying on an MPN suffix alone.
Pilihan pengganti yang segera untuk ATF22V10CZ-15SI — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
ATF22V10C-15SI
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10CZ-15SC
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10CQ-15SI
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10CQ-15JI
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10C-15SC
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
ATF22V10CZ-15SI Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Electrically Erasable CMOS Programmable Logic Device |
| Architecture | Industry-standard PLD architecture |
| Macrocells | 10 macrocells |
| Gate Capacity | 500 gates |
| Speed Grade | 15 ns |
| Maximum Pin-to-Pin Delay | 12 ns maximum |
| Tegangan Pemberi Arus | 5 V |
| Memory Technology | Electrically erasable Flash memory |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Maximum Standby Power | 25 microamperes maximum with input transition detection |
| Programmability | Reprogrammable, 100% tested |
| Temperature Grade | Industrial temperature grade |
| Kemasan | 24-SOIC |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin ATF22V10CZ-15SI 24-soic
Konfigurasi pin untuk ATF22V10CZ-15SI (24-soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATF22V10CZ-15SI.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATF22V10CZ-15SI patut untuk 6 aplikasis: Industrial Peripheral Decoding, Legacy Interface Control, Alarm and Status Logic, Bus Data Selection, Pulse and Edge Conditioning, Data and Memory Control Logic.
Industrial Peripheral Decoding
The ATF22V10CZ-15SI fits legacy industrial peripheral decoding where address or command signals must be translated into a compact set of enables and control outputs. Its 10 macrocells provide approximately 500 gates of programmable logic, while the 15 ns speed grade accommodates moderate control paths and registered outputs. A typical implementation would combine input equations with clocked outputs in a 24-SOIC footprint. The principal design consideration is ensuring every decoded path meets timing at the system’s worst supply voltage and temperature. Because the device uses electrically erasable Flash configuration, logic can be updated without removing the package, which supports design revisions and controlled equipment maintenance.
Disebarkan
Legacy Interface Control
The ATF22V10CZ-15SI is useful for consolidating legacy interface control that would otherwise occupy several gates and flip-flops. Its 10 macrocells can implement address qualification, latch controls, bus strobes, and status flags in a single 24-SOIC device. The 15 ns grade provides useful margin for moderate-speed asynchronous control logic, while CMOS- and TTL-compatible I/O eases integration with older digital subsystems. Engineers should preserve the device’s power, ground, clock, and output-enable connections exactly as defined in the manufacturer pin table and account for unused inputs in the programmed design.
Disebarkan
Alarm and Status Logic
The ATF22V10CZ-15SI can consolidate alarm qualification, event latching, and status-indicator logic into one programmable device. Ten macrocells allow multiple Boolean conditions to be combined without implementing a general-purpose controller, and the electrically erasable Flash configuration allows thresholds or logic equations to be updated during maintenance. The 15 ns speed class is suitable for qualification and display-update paths rather than high-bandwidth signal processing. A robust implementation should define reset behavior, prevent asynchronous inputs from creating metastable flip-flop conditions, and account for LED or relay loads through appropriate output drive circuitry.
Disebarkan
Bus Data Selection
The ATF22V10CZ-15SI can implement compact bus-chip-select and data-routing functions when an older system requires several address decoders. Its 500-gate, 10-macrocell architecture allows address comparisons, enable generation, and output gating to be integrated in a single 24-SOIC package. The 15 ns grade is appropriate for conventional control-bus timing when external devices have adequate hold and access margins. Designers should evaluate propagation delay from address input to chip-select output, include setup and hold requirements for downstream devices, and confirm that the programmed equations do not introduce glitches during changing address bits.
Disebarkan
Pulse and Edge Conditioning
The ATF22V10CZ-15SI can condition noisy, stretched, or irregular control pulses before they reach another subsystem. Its programmable macrocells support latches, gating, edge qualification, and one-shot-like logic within the 10-macrocell limit. The nominal 5 V operation and TTL-compatible interfaces help integrate with legacy control boards, while the 15 ns speed grade provides predictable response for moderate clock and asynchronous-control rates. Timing review should include pulse-width limits, reset recovery, removal, and clock-domain relationships. Testing the programmed configuration over voltage and temperature is important because combinational hazard pulses can occur even when nominal propagation delay meets timing.
Disebarkan
Data and Memory Control Logic
The ATF22V10CZ-15SI is suitable for generating read, write, latch, and sequencing controls in small memory or peripheral subsystems. Ten macrocells allow control equations to be combined with registers while retaining a simple reprogrammable architecture. Its electrically erasable Flash technology supports repeatable configuration during development and controlled field updates. The implementation must account for memory access-time overlap, acknowledge timing, and control-signal glitches rather than relying only on the device’s 15 ns grade. Clock-domain boundaries, reset polarity, and the exact 24-SOIC pin assignments should be verified against the manufacturer datasheet before schematic release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATF22V10CZ-15SI — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATF22V10C-15SI | ATF22V10CZ-15SC | ATF22V10CQ-15SI | ATF22V10CQ-15JI | ATF22V10C-15SC |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Gate Capacity | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Speed Grade | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns | 15 ns |
| Supply Voltage | 5 V nominal | 5 V nominal | 5 V nominal | 5 V nominal | 5 V nominal | 5 V nominal |
| Programmable Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Input and Output Compatibility | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible |
Penyeberangsung Jelas
- Combines ten macrocells with Flash reprogrammability (vsATF22V10C-15SC)
- Provides a directly documented 15 ns industrial-temperature ordering code (vsATF22V10CZ-15SC)
- Uses the established 24-SOIC ATF22V10 footprint (vsATF22V10CQ-15JI)
Catatan Desain
Do not treat every ATF22V10 order code as electrically and programmatically identical. Confirm the package drawing, pin-description table, operating-temperature grade, speed grade, and device-programming instructions for the proposed substitute. Pay particular attention to the extra Z in ATF22V10CZ-15SI, because the manufacturer ordering convention can distinguish package, temperature, or qualification options even when several parts appear electrically similar.
Treat address, clock, and asynchronous inputs as potential sources of combinational hazards. Use the PLD compiler’s timing and hazard analysis, constrain unused pins according to the manufacturer guidance, and keep sensitive interconnects short. The 15 ns speed grade describes nominal device propagation performance; downstream setup time, hold time, board delay, temperature, and supply variation must also be included in the timing budget.
Follow the manufacturer’s 24-SOIC footprint and pin-1 orientation when laying out the PCB. Provide a low-impedance supply and ground connection, place decoupling close to the power pins, and route programming or configuration signals away from sensitive analog sections. Since the device is programmable and reprogrammable, include a test strategy that verifies the fuse or Flash configuration after programming and after board-level assembly.
Maklumat Kesediaan
No explicit environmental or automotive compliance statements were identified for this exact MPN. Industrial temperature grading does not imply AEC-Q100 qualification.