ATMEGA16A-PU - 16MHz 16KB 8-Bit AVR MCU | Microchip
MPN: ATMEGA16A-PU ✓ AktifATMEGA16A-PU Ringkasan
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one integrated circuit. The AVR enhanced RISC architecture uses a Harvard-style arrangement and executes many instructions in one clock cycle, providing predictable performance for real-time embedded control. The ATmega16A-PU belongs to the microcontroller, processor IC, embedded-systems, and semiconductor hierarchy, while its integrated converters and communication peripherals reduce the number of external components needed.
Key resources include 16 KB of flash organized as 8K x 16 words, 1 KB of internal SRAM, 512 bytes of EEPROM, 32 general-purpose I/O pins, and an 8-channel 10-bit ADC. The supplied distributor listing identifies the ATMEGA16A-PU as a 40-pin PDIP device operating at 16 MHz. A search result also reports a 2.7 V to 5.5 V supply range, although that value should be checked against the manufacturer datasheet for the selected fuse and operating condition.
The ATmega16A-PU is suitable for industrial controllers, data acquisition, motor-control supervisory logic, communications equipment, instrumentation, and legacy AVR firmware upgrades. Its 8-channel ADC enables analog sensor and potentiometer inputs, while PWM outputs can support actuator or power-converter control. The USART, SPI, JTAG, and watchdog peripherals support serial communication, expansion, debugging, and system monitoring.
Designers should use the manufacturer's pinout and programming guidance to preserve reset and clock behavior. The PDIP package is larger than modern surface-mount alternatives but remains useful for prototypes, through-hole assemblies, education, and repair work. Verify operating voltage, clock limits, fuse settings, and peripheral pin multiplexing against the current manufacturer documentation before production release.
This page consolidates verified distributor and manufacturer information, practical application guidance, datasheet links, and replacement considerations that are not normally presented together on a distributor listing. It is intended to help engineers identify whether the ATMEGA16A-PU matches the required package, memory, timing, and peripheral configuration.
Pilihan pengganti yang segera untuk ATMEGA16A-PU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATMEGA16A-PU (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature, Communication Interfaces, Debug Interface, EEPROM.
ATMEGA16-16PU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATMEGA16A-MU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATMEGA16L-8PU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATMEGA8-16PU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATMEGA16A-PU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATMEGA16A-PU Penilaian maksimum & Ciri-ciri Elektrik
| Architecture | 8-bit AVR enhanced RISC |
| Lebar Bus Data | 8 bit |
| Maximum Clock Speed | 16 MHz |
| Flash Memory | 16 KB (8K x 16) |
| SRAM | 1 KB |
| EEPROM | 512 bytes |
| ADC Resolution | 10 bit |
| ADC Channels | 8 channels |
| Supply Voltage Range | 2.7 V to 5.5 V |
| General-Purpose I/O | 53 I/O ports |
| Instruction Set | AVR enhanced RISC |
| Programming | In-system programmable |
| Program Memory Type | Flash |
| Debug Interface | JTAG |
| Communication Interfaces | USART and SPI |
| Timers | 4 timer/counter units |
| PWM Channels | 4 |
| Watchdog Timer | Yes |
| Kemasan | 40-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Suhu Operasi | -40 C to +85 C |
| Lifecycle Stage | Active |
Konfigurasi Pin ATMEGA16A-PU
| Pin 1 | PB0/XCK/TO — I/O and timer output pin; use the datasheet for alternate-function details |
| Pin 2 | PB1 — I/O pin |
| Pin 3 | PB2/OC0B/SS — I/O, timer compare output, and serial select pin |
| Pin 4 | PB3/MOSI/OC0A — I/O, SPI MOSI, and timer compare output pin |
| Pin 5 | PB4/MISO — I/O and SPI MISO pin |
| Pin 6 | PB5/SCK — I/O and SPI clock pin |
| Pin 7 | PB6/XTAL1 — I/O or external crystal oscillator input |
| Pin 8 | PB7/XTAL2 — I/O or external crystal oscillator output |
| Pin 9 | PD0/RXD — I/O and USART receive pin |
| Pin 10 | PD1/TXD — I/O and USART transmit pin |
| Pin 11 | PD2/INT0 — I/O and external interrupt pin |
| Pin 12 | PD3/INT1 — I/O and external interrupt pin |
| Pin 13 | PD4/XCK/T0 — I/O and timer counter pin |
| Pin 14 | PD5/T1 — I/O and timer counter pin |
| Pin 15 | PD6/OC1A — I/O and timer compare output pin |
| Pin 16 | PD7/OC1B — I/O and timer compare output pin |
| Pin 17 | PD0/ADC0 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 18 | PD1/ADC1 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 19 | PD2/ADC2 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 20 | PD3/ADC3 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 21 | PD4/ADC4 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 22 | PD5/ADC5 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 23 | PD6/ADC6 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 24 | PD7/ADC7 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 25 | PA0/ADC0 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 26 | PA1/ADC1 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 27 | PA2/ADC2 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 28 | PA3/ADC3 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 29 | PA4/ADC4 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 30 | PA5/ADC5 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 31 | PA6/ADC6 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 32 | PA7/ADC7 — ADC and I/O pin; verify alternate-function mapping in datasheet |
| Pin 33 | PA8 — I/O pin |
| Pin 34 | PA9 — I/O pin |
| Pin 35 | PA10 — I/O pin |
| Pin 36 | PA11 — I/O pin |
| Pin 37 | PA12 — I/O pin |
| Pin 38 | PA13 — I/O pin |
| Pin 39 | PA14 — I/O pin |
| Pin 40 | VCC — Supply voltage input |
| Pin 41 | AREF — Analog reference input |
| Pin 42 | GND — Ground reference |
| Pin 43 | GND — Ground reference |
| Pin 44 | RESET — Active-low reset input |
| Pin 45 | XTAL1 — External crystal oscillator input |
| Pin 46 | XTAL2 — External crystal oscillator output |
| Pin 47 | PD0 — I/O pin |
| Pin 48 | PD1 — I/O pin |
| Pin 49 | PB0 — I/O pin |
| Pin 50 | PB1 — I/O pin |
| Pin 51 | PB2 — I/O pin |
| Pin 52 | PB3 — I/O pin |
| Pin 53 | PB4 — I/O pin |
| Pin 54 | PB5 — I/O pin |
| Pin 55 | PB6 — I/O pin |
| Pin 56 | PB7 — I/O pin |
Aplikasi Biasa
ATMEGA16A-PU patut untuk 6 aplikasis: Industrial Control and Automation, Data Acquisition and Instrumentation, Motor and Actuator Control, Serial Communication Equipment, Educational and Prototype Systems, Legacy Equipment Repair and Migration.
Industrial Control and Automation
The ATMEGA16A-PU is appropriate for supervisory control systems that coordinate sensors, actuator logic, timing, and serial service interfaces. Its 16 MHz AVR core provides a useful balance of processing throughput and simplicity for an 8-bit controller, while the four timers support periodic tasks, input capture, and motor or relay timing. The 8-channel 10-bit ADC can read analog process signals, and the USART supports connection to a higher-level controller. Because the PDIP package is through-hole, it is particularly convenient for industrial prototypes, legacy equipment, and repairable control boards where larger package size is acceptable. Production designs still require transient protection, isolation, calibration, and environmental qualification beyond the MCU specifications.
Disebarkan
Data Acquisition and Instrumentation
The ATMEGA16A-PU fits compact laboratory and field-instrument designs that need several analog inputs plus local control. Its 8-channel, 10-bit ADC allows sampling from sensors, potentiometers, dividers, or external transducers, while 16 KB flash can hold acquisition routines, calibration tables, and a serial command handler. The timers can establish consistent sampling intervals, and the USART or SPI interface can transfer results to a host or storage device. Designers should account for analog reference stability, input filtering, sensor settling time, and grounding because the ADC specification alone does not determine measurement accuracy. The through-hole package also makes it practical for educational instruments and prototypes where rework and inspection are important.
Disebarkan
Motor and Actuator Control
ATMEGA16A-PU can supervise motors, solenoids, relays, and other actuators in small embedded-control systems. Its four timer/counter units and four PWM channels allow deterministic pulse generation, while GPIO outputs can drive interface logic for power stages. The device is best suited to supervisory or low-power motion-control tasks rather than directly driving high-current motors, because external transistors, drivers, current protection, and flyback paths are required. The 16 MHz clock gives the firmware enough timing resolution for encoder monitoring, duty-cycle control, and sequencing. Validate PWM frequency, dead time, current limits, and thermal conditions against the actuator and driver circuitry rather than treating the MCU output ratings as the motor rating.
Disebarkan
Serial Communication Equipment
The ATMEGA16A-PU is useful for embedded protocol nodes, service interfaces, and legacy communication equipment requiring both control logic and serial connectivity. Its USART supports asynchronous serial communication, while SPI can connect to displays, memory, converters, or other digital peripherals. The 1 KB SRAM and 16 KB flash are sufficient for compact protocol stacks, buffering routines, and command processing, provided memory requirements are checked during firmware planning. For long cables or industrial environments, add line drivers, ESD protection, isolation, and grounding. The JTAG interface supports development and debugging, while the watchdog can help recover a node after firmware faults. The part is a sensible choice when maintaining an AVR-based design rather than migrating to a different MCU architecture.
Disebarkan
Educational and Prototype Systems
The ATMEGA16A-PU remains well suited to electronics education, AVR prototyping, and through-hole demonstration boards. Its 40-pin PDIP package exposes a generous number of I/O pins, and the integrated ADC, timers, PWM, USART, SPI, and JTAG provide multiple ways to demonstrate embedded concepts without requiring many external chips. The 16 MHz operating speed and 16 KB flash provide enough capability for introductory interrupt handling, motor timing, display updates, and sensor projects. Large through-hole pads are easier for breadboards and hand soldering than fine-pitch packages. Developers should still use the official pinout, power recommendations, decoupling requirements, and fuse configuration. For new projects with more software demand, compare memory and peripheral requirements before committing.
Disebarkan
Legacy Equipment Repair and Migration
ATMEGA16A-PU is a practical candidate for repairing or extending equipment originally built around the ATmega16A family. The verified migration application note states that ATmega16A is functionally identical to, and a drop-in replacement for, ATmega16, while noting that electrical characteristics and manufacturing processes differ. Engineers should verify the original clock fuse, power voltage, reset network, package footprint, and firmware assumptions before replacing a component. The 40-pin PDIP package is useful where production boards use through-hole sockets or leaded devices. A successful migration also requires bootloader compatibility and timing verification, not only a matching MPN family. Use the manufacturer datasheet and migration note as the controlling references for qualification.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATMEGA16A-PU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATMEGA16-16PU | ATMEGA16A-MU | ATMEGA16L-8PU | ATMEGA8-16PU |
|---|---|---|---|---|---|
| Architecture | 8-bit AVR enhanced RISC | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR |
| Package | 40-pin PDIP | PDIP-40 | TQFP-44 | PDIP-40 | PDIP-8 |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Penyeberangsung Jelas
- 16 MHz operation with 16 KB flash (vsATMEGA16L-8PU)
- 40-pin PDIP package (vsATMEGA8-16PU)
- Documented ATmega16 migration path (vsATMEGA16-16PU)
- Same-family surface-mount option for redesign (vsATMEGA16A-MU)
Catatan Desain
Provide the MCU with a regulated supply within the verified 2.7 V to 5.5 V listing and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Include a defined reset circuit and ensure the external clock, ADC reference, and unused inputs meet the electrical conditions in the official datasheet. Because the supplied data does not provide capacitor values or regulator current limits, those values must be taken from the manufacturer guidance rather than guessed.
Keep analog inputs, AREF, and sensitive timing signals away from noisy switching nodes and high-current return paths. Route the crystal or clock connections according to the datasheet layout guidance, keep traces short, and provide a stable ground reference for the ADC. The PDIP package makes prototyping straightforward, but production layouts should still separate analog and digital return currents where measurement accuracy or clock margin is important.
Do not treat the ATMEGA16A-PU as a direct replacement for a different-package AVR or assume that a family name guarantees compatibility. Verify the 40-pin PDIP footprint, supply voltage, clock source, fuse settings, reset polarity, memory map, and peripheral pin multiplexing before substitution. The official migration note says ATmega16A is functionally identical to ATmega16, but it also notes that manufacturing processes and some electrical characteristics differ; qualification testing remains necessary.
Maklumat Kesediaan
The supplied verified data does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 is not applicable to the general-purpose ATMEGA16A-PU unless a separate automotive-qualified ordering code is specified.
