Microchip Technology

ATSAML11E16A-AF - 32MHz Cortex-M23 Secure MCU | Microchip

MPN: ATSAML11E16A-AF ✓ Aktif
3.3 V Vdss Less than 25 uA/MHz Id Chip-level tamper resistance Rds(on) 32-TQFP, 7x7 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATSAML11E16A-AF Ringkasan

The Microchip Technology ATSAML11E16A-AF is a 32-bit Arm Cortex-M23 SAM L11 microcontroller with 64KB flash memory, 16KB SRAM, 32MHz maximum operating frequency, and a 32-pin TQFP package. It is designed for low-power embedded systems that require hardware-assisted security, Arm TrustZone Technology, secure key storage, and tamper-resistant capabilities. The part is identified as an automotive-grade MCU with AEC-Q100 qualification in the product listing.

An ultra-low-power microcontroller is a semiconductor device designed to execute firmware while minimizing energy consumption during active, sleep, and backup operating states. The SAM L11 family combines an Arm Cortex-M23 processor, embedded security features, serial peripherals, and analog conversion functions within a compact microcontroller platform. This hierarchy places the device within microcontroller ICs, embedded processors, and low-power embedded systems.

The ATSAML11E16A-AF operates at up to 32MHz and includes 64KB of embedded flash and 16KB of SRAM. Its security architecture includes TrustZone isolation, secure key storage, and chip-level tamper resistance. The manufacturer describes active-mode consumption as less than 25uA/MHz and sleep-mode consumption as less than 100nA, making the device suitable for battery-operated equipment where duty-cycled sensing and low standby demand are important. The 3.3V supply indication in the product listing aligns with common industrial and embedded 3.3V power systems.

The microcontroller includes automotive-oriented security and environmental requirements, with AEC-Q100 qualification stated for this exact ordering code. Its 32-TQFP, 7x7mm package provides a conventional gull-wing lead arrangement for automated assembly and prototype boards. The 32-pin format exposes the SAM L11 peripheral set while avoiding the smaller VQFN package variants listed for other ordering codes. Pin assignments and peripheral multiplexing should be taken from the manufacturer pin-description table before PCB routing.

Typical applications include secure industrial sensor nodes, low-power connected equipment, battery-powered meters, access-control terminals, automotive body electronics, and compact control modules. The Cortex-M23 processor and TrustZone partition can separate trusted boot, key handling, and application code, while the low-power operating modes help extend operating time between battery service intervals. The same security basis is useful in applications handling credentials, diagnostic data, or configuration parameters.

Design the power supply and decoupling around the manufacturer reference circuit. Keep sensitive security connections short, provide a stable clock and reset implementation, and use the package pin table to verify alternate-function assignments before finalizing routing. Confirm the 3.3V operating condition against the system rail and check the automotive qualification requirements for the intended deployment, especially when the product is used beyond a laboratory prototype.

This product overview combines the manufacturer platform information with package, memory, processor, security, and application details. It also distinguishes the automotive 32-pin TQFP ordering code from related temperature and packing variants, helping engineers confirm footprint compatibility before placing the MCU on a PCB.

Pilihan pengganti yang segera untuk ATSAML11E16A-AF — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATSAML11E16A-AF (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature, Mounting Type, Active Mode Current, Sleep Mode Current.

Microchip Technology
Package: 32-TQFP (7x7 mm)
Operating Temperature: -40 C to +125 C
Mounting Type: Surface Mount
Bandingkan Dengan ATSAML11E16A-AF →
Microchip Technology
Package: 32-pin TQFP (7x7 mm)
Operating Temperature: -40C to +85C (industrial)
Mounting Type: Surface Mount
Bandingkan Dengan ATSAML11E16A-AF →
Microchip Technology
Package: 32-pin VQFN (5x5 mm) with exposed pad
Operating Temperature: -40C to +125C
Mounting Type: Surface Mount
Bandingkan Dengan ATSAML11E16A-AF →

ATSAML11E16A-AUTKPH

✅ Masuk Drop-In
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M23 · 32 MHz · 64 KB (64K x 8) · 16 KB · 1.62 V to 3.63 V · < 25 uA/MHz · < 100 nA · 32-pin TQFP (7x7 mm)

Hubungi untuk harga

Lihat Datasheet →

ATSAML11E16A-AFTKPH

✅ Masuk Drop-In
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M23 (ARMv8-M Baseline) · ARM TrustZone-M · 32 MHz · 64 KB (64K x 8) · 16 KB · 1.62 V to 3.63 V · -40 C to +125 C · 32-TQFP (7x7 mm)

Hubungi untuk harga

Lihat Datasheet →

ATSAML11E16A-MFTKPH

✅ Masuk Drop-In
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M23 (ARMv8-M Baseline) · 32 MHz · 64 KB · 8 KB · 1.62 V to 3.63 V · < 25 uA/MHz · < 100 nA · ARM TrustZone-M, secure key storage, tamper detection, crypto accelerator

Hubungi untuk harga

Lihat Datasheet →

ATSAML11E16A-MFTKPH

✅ Masuk Drop-In
Microchip Technology
📦 32-TQFP (7x7)
ARM Cortex-M23 (ARMv8-M Baseline) · 32 MHz · 64 KB · 8 KB · 1.62 V to 3.63 V · < 25 uA/MHz · < 100 nA · ARM TrustZone-M, secure key storage, tamper detection, crypto accelerator

Hubungi untuk harga

Lihat Datasheet →

ATSAML11E16A-AF Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M23 microcontroller
Processor Core Arm Cortex-M23
Maximum Operating Frequency 32 MHz
Flash Memory 64 KB
SRAM 16 KB
Tegangan Pemberi Arus 3.3 V
Active Mode Current Less than 25 uA/MHz
Sleep Mode Current Less than 100 nA
Kemasan 32-TQFP, 7x7 mm
Bilangan Pin 32 pins
Jenis Pemasangan Surface mount, gull-wing leads
Security Architecture Arm TrustZone Technology
Secure Key Storage Supported
Tamper Resistance Chip-level tamper resistance
Temperature Grade Automotive grade
AEC-Q100 Qualification Qualified
Cryptographic Support Crypto-enabled device
Software Development Support Keil MDK and Keil Studio
Manufacturer Product Family SAM L11

Panduan Konfigurasi Pin ATSAML11E16A-AF 32-tqfp, 7x7 mm

Konfigurasi pin untuk ATSAML11E16A-AF (32-tqfp, 7x7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 32-tqfp, 7x7 mm untuk ATSAML11E16A-AF

Tiada data garisan pin yang diperoleh untuk ATSAML11E16A-AF.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATSAML11E16A-AF patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Secure Industrial Control Modules, Automotive Body Electronics, Secure Access-Control Terminals, Battery-Powered Meters, Low-Power Connected Equipment.

🧩

Battery-Powered Sensor Nodes

ATSAML11E16A-AF fits battery-powered sensor nodes that periodically wake to measure, process, and transmit data. Its 32MHz Arm Cortex-M23 core provides enough performance for local control, while the manufacturer reports less than 25uA/MHz active consumption and less than 100nA in sleep mode. The 64KB flash supports compact firmware, and 16KB SRAM accommodates buffering, stack use, and communication routines. Use the low-power modes around the sensor duty cycle rather than leaving the MCU continuously active. A practical benefit is longer service intervals between battery replacements, although final runtime also depends on sensor load, radio activity, regulator efficiency, and board leakage.

🏭

Secure Industrial Control Modules

ATSAML11E16A-AF is appropriate for compact industrial controllers that must separate trusted code from application code. Arm TrustZone Technology creates hardware-assisted isolation between security domains, while secure key storage and chip-level tamper resistance strengthen protection for credentials and configuration data. The 32MHz Cortex-M23 processor can supervise sensors, actuators, and local communications without a separate higher-power processor. Its 64KB flash and 16KB SRAM suit moderate control workloads where code size and data buffering remain constrained. Confirm the automotive-qualified ordering code, operating-temperature requirements, and exact peripheral assignment during design qualification.

🚗

Automotive Body Electronics

ATSAML11E16A-AF fits distributed automotive body-electronics modules that coordinate switches, lamps, sensors, or diagnostic interfaces. The exact ordering code is identified as automotive grade and AEC-Q100 qualified, providing a clearer qualification path than an unverified substitute. A 32MHz Cortex-M23 core handles protocol servicing and deterministic control tasks, while TrustZone and secure key storage protect privileged software. The 32-TQFP package is compatible with conventional automated assembly and rework processes. Verify EMC, transient immunity, temperature, supply, and functional-safety requirements against the complete automotive system specification before production release.

🔒

Secure Access-Control Terminals

ATSAML11E16A-AF is useful in access-control readers and credential terminals where local security matters. TrustZone isolation can protect key-handling and boot-related routines from less trusted application code, while the crypto capability supports authenticated communication workflows. At 32MHz, the Cortex-M23 core can service user input, display control, communications, and system diagnostics. The 64KB flash and 16KB SRAM are suitable for compact embedded firmware, although a larger system with graphical interfaces may require external memory. Confirm the peripheral mix and boot configuration before selecting this MCU over a larger-memory variant.

⚡

Battery-Powered Meters

ATSAML11E16A-AF can serve as the control MCU in a portable meter or low-energy measurement instrument. The 32MHz Cortex-M23 core handles timing, calibration storage, measurement sequencing, and communications, while less than 25uA/MHz active consumption and less than 100nA sleep consumption support duty-cycled operation. A companion precision ADC can capture higher-resolution analog measurements when the MCU's internal conversion resources are insufficient. Design the power tree to disable unused analog and communication blocks during idle periods. Actual standby performance depends on sensor excitation, display load, regulator leakage, and the selected peripheral configuration.

🌐

Low-Power Connected Equipment

ATSAML11E16A-AF suits compact connected equipment that spends much of its operating life in sleep mode. The microcontroller wakes to service communications or controls, executes code on the 32MHz Cortex-M23 core, and returns to a low-current state between events. Its 64KB flash and 16KB SRAM are adequate for lightweight protocol stacks and local logic, while TrustZone helps protect credentials and update-related routines. A 32-pin TQFP package also simplifies prototype assembly and inspection compared with a leadless VQFN. Select external radio and regulator components according to their current requirements because the MCU's low-power figures alone do not determine system consumption.

Ringkasan Produk Disebarkan

MCP3301T-BI/SN Microchip Technology Dipergunakan di: Battery-Powered Sensor Nodes MCP6001T-I/OT Low-power amplifier for conditioning sensor outputs Dipergunakan di: Battery-Powered Sensor Nodes, Battery-Powered Meters MCP6061T-I/SN Low-power operational amplifier for sensor and actuator interfaces Dipergunakan di: Secure Industrial Control Modules MCP6074-E/SL Microchip Technology Dipergunakan di: Secure Industrial Control Modules, Automotive Body Electronics MCP6072-E/SN Microchip Technology Dipergunakan di: Automotive Body Electronics MCP6002T-I/MS General-purpose amplifier for analog interface conditioning Dipergunakan di: Secure Access-Control Terminals MCP6071T-I/SN Low-power amplifier for current-loop sensing interfaces Dipergunakan di: Secure Access-Control Terminals MCP3301T-BI/MS Microchip Technology Dipergunakan di: Battery-Powered Meters MCP6041T-E/MS Low-power amplifier for low-level analog sensing Dipergunakan di: Low-Power Connected Equipment MCP6074-E/ST Microchip Technology Dipergunakan di: Low-Power Connected Equipment
What is ATSAML11E16A-AF?
ATSAML11E16A-AF is a Microchip SAM L11 32-bit microcontroller built around the Arm Cortex-M23 core. It provides 64KB of flash, 16KB of SRAM, a 32MHz maximum clock, and a 32-pin TQFP package. The device also includes Arm TrustZone Technology, secure key storage, and chip-level tamper resistance for embedded security designs.
What are the key specifications of ATSAML11E16A-AF?
The ATSAML11E16A-AF combines a 32MHz Arm Cortex-M23 processor, 64KB flash memory, 16KB SRAM, and a 3.3V supply in a 32-TQFP package. The manufacturer specifies less than 25uA/MHz active consumption and less than 100nA in sleep mode. Automotive-grade AEC-Q100 qualification is also stated for this ordering code.
What is the operating voltage of ATSAML11E16A-AF?
The ATSAML11E16A-AF is identified as a 3.3V microcontroller in the product listing. The manufacturer product family page and the device datasheet should be used to confirm the complete input-voltage range, operating-temperature limits, and electrical operating conditions before final power-supply design.
Where can I download the ATSAML11E16A-AF datasheet PDF?
Download the ATSAML11E16A-AF documentation from the Microchip product page or the linked datasheet resource. The datasheet contains the authoritative pin-description table, electrical characteristics, memory map, peripheral details, package drawings, and recommended application circuitry. Use the exact ATSAML11E16A-AF ordering code when selecting revision-specific documentation.
Where can I find the ATSAML11E16A-AF pinout?
The ATSAML11E16A-AF pinout is defined by the 32-pin TQFP package and the manufacturer pin-description table. The product is a 32-pin, 7x7mm gull-wing package, so its footprint is not interchangeable with the 32-pin 5x5mm VQFN variants of the SAM L11 family. Assign PCB tracks only after checking pin numbers, alternate functions, and exposed electrical requirements in the datasheet.
Where can I buy ATSAML11E16A-AF online?
Use the Request a Quote form on this page to request ATSAML11E16A-AF availability, order quantity, and delivery terms. The exact MPN is a 32-pin TQFP automotive-grade MCU, so confirm the package code and temperature-grade suffix when placing an order. The form avoids stale stock information and allows XAIPART to return a current sourcing quotation.
What is the price of ATSAML11E16A-AF?
Submit the ATSAML11E16A-AF MPN through the Request a Quote form on this page for a current unit quotation and quantity-break review. Pricing depends on order quantity, package form, and current supply status. The product is identified as a 32-TQFP device with 64KB flash and 16KB SRAM.
What is the lead time for ATSAML11E16A-AF?
Request the current lead time using the Request a Quote form on this page. Lead time depends on the exact package form, order quantity, and supply status at the time of quotation. Confirm whether the required order uses a tray or another delivery format before committing the production schedule.
Is ATSAML11E16A-AF in stock?
Check current ATSAML11E16A-AF stock and available order quantity through the Request a Quote form on this page. The component is listed as an active automotive-grade 32-TQFP microcontroller, but availability can change with production and packaging demand. Provide the required quantity and delivery target with the request.
What can replace ATSAML11E16A-AF?
The closest documented drop-in candidates are related ATSAML11E16A ordering codes in the same 32-pin TQFP footprint, including ATSAML11E16A-AUT and ATSAML11E16A-AFTKPH. Before replacing the exact part, verify temperature grade, packing code, qualification, pin configuration, firmware support, and lifecycle status. Cross-family substitutions require schematic and PCB review rather than a blind replacement.
Can ATSAML11E16A-AUT replace ATSAML11E16A-AF?
ATSAML11E16A-AUT is a related Microchip SAM L11 ordering code with the same 32-TQFP, 7x7mm footprint and the same 64KB flash, 16KB SRAM, and 32MHz Cortex-M23 platform. It is a practical drop-in candidate when the order form and temperature requirements are compatible, but automotive qualification and packing details must be checked against the original production requirements.
ATSAML11E16A-AF vs ATSAML11E16A-AUT - which is better for automotive use?
ATSAML11E16A-AF is the ordering code explicitly identified as automotive grade and AEC-Q100 qualified, while ATSAML11E16A-AUT is a related temperature-grade variant. For an automotive production design, select ATSAML11E16A-AF unless the exact qualification record for the alternative is confirmed. Both use the same 32-TQFP footprint and core memory configuration.
When should I choose ATSAML11E16A-AF over a lower-memory SAM L11 device?
Choose ATSAML11E16A-AF when the design benefits from 64KB flash and 16KB SRAM while retaining low-power Cortex-M23 operation and hardware-assisted security. A lower-memory device may be appropriate when firmware is smaller and SRAM is not constrained, but it should be selected only after checking bootloader size, update storage, security-key handling, and peripheral requirements.
Is ATSAML11E16A-AF suitable for battery-powered sensor nodes?
ATSAML11E16A-AF is suitable for battery-powered sensor nodes because the SAM L11 platform operates below 25uA/MHz in active mode and below 100nA in sleep mode. Its 32MHz Cortex-M23 core supports responsive local processing, while TrustZone and secure key storage help isolate sensitive routines. Actual battery life depends on sensor duty cycle, radio activity, regulator efficiency, and leakage.
What security features does ATSAML11E16A-AF provide?
ATSAML11E16A-AF provides Arm TrustZone Technology, secure key storage, chip-level tamper resistance, and crypto capability. TrustZone separates trusted and untrusted execution contexts, while the dedicated security resources protect sensitive keys and platform functions. The exact cryptographic algorithms and boot behavior should be confirmed in the device datasheet and security documentation.
Which development tools support ATSAML11E16A-AF?
The ATSAML11E16A-AF is supported by the Keil MDK and Keil Studio toolchain. The Arm Cortex-M23 device is also listed on the Keil device-support page. Program the exact family member, configure the correct device variant, and confirm the package pin assignments before using a board template or debugger target.

Data referensi kejuruteraan untuk ATSAML11E16A-AF — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ATSAML11E16A-AF when the design requires the exact Microchip SAM L11 automotive-grade 32-pin TQFP device, including a 32MHz Cortex-M23 core, 64KB flash, 16KB SRAM, TrustZone isolation, and secure key storage. ATSAML11E16A-AUT and ATSAML11E16A-AFTKPH are appropriate related candidates when their temperature, qualification, and packing attributes satisfy the production requirements. Use ATSAML11E16A-MFTKPH or ATSAML11E16A-MFT for industrial-temperature designs that do not require the target's automotive ordering code. The 32-TQFP footprint is also a practical reason to select this family during prototyping because its gull-wing leads are easier to inspect and rework. However, the VQFN alternatives are not drop-in board replacements because their 5x5mm packages and land patterns differ. Before ordering, verify the complete operating range, peripheral mix, qualification records, firmware support, and package drawing against the intended product.

Perbandingan dengan Gantian

Parametr Produk Ini ATSAML11E16A-AUT ATSAML11E16A-AFTKPH ATSAML11E16A-MFTKPH ATSAML11E16A-MFT
Package 32-TQFP (7x7) 32-TQFP (7x7) 32-TQFP (7x7) 32-TQFP (7x7) 32-TQFP (7x7)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Processor Core Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB
SRAM 16 KB 16 KB 16 KB 16 KB 16 KB
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Security Features TrustZone, secure key storage, chip-level tamper resistance SAM L11 security platform SAM L11 security platform SAM L11 security platform SAM L11 security platform
Temperature Grade Automotive grade Related temperature-grade ordering code Related temperature-grade ordering code Industrial temperature grade Industrial temperature grade

Penyeberangsung Jelas

  • Exact automotive-grade ordering code (vsATSAML11E16A-MFT)
  • Same CPU and memory configuration for footprint reuse (vsATSAML11E16A-AUT)
  • Low-power processing with hardware-assisted isolation (vsATSAML11E16A-MFTKPH)
  • Conventional 32-pin TQFP assembly format (vsATSAML11E16A-MUKPH)

Catatan Desain

Use the manufacturer reference circuit for supply decoupling and confirm the exact 3.3V operating range before selecting capacitors. Place the input and output capacitors close to their associated pins, keep the power loop compact, and provide a clean return path for sensitive analog and security functions. Low sleep current is valuable only when unused peripherals, external pull networks, and regulators are also controlled.

Assign the 32-pin TQFP footprint from the ATSAML11E16A-AF package drawing rather than from the related VQFN family members. Check every pin function and alternate mapping against the datasheet. Route debug, programming, clock, reset, communication, and security-sensitive nets away from noisy switching nodes, and include test points for firmware update and production programming.

Do not assume that two SAM L11 order codes are interchangeable merely because their memory and package descriptions match. Compare temperature grade, AEC-Q100 status, packing suffix, qualification, and lifecycle requirements before substitution. Also avoid treating the TQFP and VQFN options as board-compatible; their dimensions, lead geometry, and land patterns differ.

Preserve separation between analog sensing paths, radio or communications circuitry, and digital switching return currents. A continuous ground plane can help, but sensitive analog nodes should remain short and away from high-current edges. Review the device pin-mux options early because peripheral assignments can change which pins are available for analog, serial, timer, and debug functions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The ATSAML11E16A-AF product listing identifies the device as automotive grade with AEC-Q100 qualification. Other environmental and material compliance attributes require confirmation from the manufacturer.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ATSAML11E16A-AF datasheet ATSAML11E16A-AF pinout ATSAML11E16A-AF datasheet pdf ATSAML11E16A-AF specifications ATSAML11E16A-AF equivalent ATSAML11E16A-AF replacement ATSAML11E16A-AF cross reference ATSAML11E16A-AF vs ATSAML11E16A-AUT ATSAML11E16A-AF footprint ATSAML11E16A-AF price ATSAML11E16A-AF stock Microchip ATSAML11E16A-AF

Komponen dan Tanda berkaitan

Microchip Technology ATSAML11E16A-AF ATSAML11E16A-AUT ATSAML11E16A-AFTKPH ATSAML11E16A-MFTKPH ATSAML11E16A-MFT SAM L11 Arm Cortex-M23 microcontroller microcontroller IC embedded processor Arm TrustZone Technology secure key storage chip-level tamper resistance cryptographic hardware 32-TQFP TQFP package family surface-mount package 64KB flash 16KB SRAM 32MHz AEC-Q100 automotive grade ultra-low-power MCU
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ