ATTINY826-XU - 20MHz 8KB 8-Bit MCU | Microchip Technology
MPN: ATTINY826-XU ✓ AktifATTINY826-XU Ringkasan
A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The tinyAVR 2 family belongs to the broader hierarchy of 8-bit MCU, embedded processor, embedded controller, and semiconductor products. Its combination of program Flash, SRAM, EEPROM, and timer, serial-interface, and GPIO resources allows a compact product to execute firmware without requiring a separate external memory device.
The ATTINY826-XU provides 8 KB of Flash organized as 8K by 8 bits and operates at up to 20 MHz. Its 1 KB SRAM supports working variables and stack operations, while 128 bytes of EEPROM provide nonvolatile storage for small configuration or calibration values. The AVR architecture includes a hardware multiplier, reducing the execution burden for multiply operations in embedded control code. Microchip identifies the device as Green, and the listed industrial temperature rating is 85°C.
The exact suffix identifies the SSOP package configuration associated with this orderable device. Microchip also offers other ATtiny826 package and ordering configurations, but designers must verify the package drawing, pin numbering, and electrical limits before substituting a different suffix. The ATTINY826 family is available in 20-pin VQFN, SSOP, and SOIC formats, while this particular ordering code is identified in distributor product records as a 20-pin SSOP device.
Typical uses include compact sensor controllers, small industrial control modules, appliance interfaces, LED-control systems, and low-cost embedded products. Engineers can use the 20 MHz CPU for responsive control loops and communication handling, while the integrated memories reduce board area. The combination is particularly useful when the product needs deterministic embedded behavior but does not require a high-performance MCU or a large external memory interface.
The primary design consideration is package-specific PCB planning. Follow the manufacturer package drawing and pin-description table when assigning traces, programming-header contacts, decoupling, and exposed connections. Check the complete ordering table before production release because package, temperature, programming, and packing options can use different suffix codes. Firmware and application development should be tested with the intended ATTINY826 device and package configuration.
This page combines manufacturer specifications, package-selection guidance, practical application fit, and a strict review of drop-in replacements. It distinguishes electrically similar but physically incompatible options, helping engineers make a package-safe decision while using the Request a Quote form for current commercial information.
Pilihan pengganti yang segera untuk ATTINY826-XU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifATTINY826-XU Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit microcontroller |
| Microcontroller Family | tinyAVR 2 |
| CPU Core | AVR |
| Frekuensi Klock Maksimum | 20 MHz |
| Flash Memory | 8 KB (8K x 8 bits) |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| Architecture | 8-bit |
| Multiplier | Hardware multiplier |
| Kemasan | 20-pin SSOP |
| Jenis Pemasangan | Surface mount |
| Industrial Temperature Grade | 85°C |
| Green Design Status | Green |
| Programming Status | Factory programmable |
| Package Family | SSOP |
| Product Series | ATtiny826 |
Panduan Konfigurasi Pin ATTINY826-XU ssop
Konfigurasi pin untuk ATTINY826-XU (ssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATTINY826-XU.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATTINY826-XU patut untuk 6 aplikasis: Compact Sensor Controllers, Industrial Control Modules, LED Lighting Controllers, Appliance User Interfaces, Low-Cost Communication Hubs, Battery-Powered Embedded Products.
Compact Sensor Controllers
The ATTINY826-XU fits compact sensor-controller boards that require local signal sampling, state handling, and actuator control without a separate external memory device. Its 8-bit AVR core operates at up to 20 MHz, providing useful execution headroom for interrupt-driven sampling and control algorithms, while 1 KB of SRAM supports working variables and stack operations. The 8 KB of Flash is sufficient for compact embedded firmware when the application is not sized to require larger program images. Its 128 bytes of EEPROM can retain calibration offsets or configuration values across power cycles. The 20-pin SSOP package also supports dense layouts, although designers must follow the exact package drawing and pin-description table when routing sensor inputs, communications, programming contacts, and power connections.
Disebarkan
Industrial Control Modules
The ATTINY826-XU is appropriate for small industrial control modules that coordinate discrete inputs, outputs, timing functions, and local status reporting. The listed 85°C industrial temperature grade supports applications within the manufacturer's specified operating limits, while the 20 MHz AVR core can execute responsive control logic without requiring a higher-complexity MCU. Its 8 KB Flash and 1 KB SRAM provide a constrained but deterministic memory budget, so firmware should be checked for stack depth, interrupt service requirements, and future feature growth. The 128-byte EEPROM is useful for retaining small operating parameters rather than general-purpose logging. For deployment in electrically noisy equipment, add appropriate input protection and ensure that the board layout, grounding, decoupling, and programming interface follow the manufacturer recommendations.
Disebarkan
LED Lighting Controllers
The ATTINY826-XU can serve as the central controller in compact LED lighting modules where timing, dimming logic, button handling, status indication, and simple communication functions must coexist in a small controller. A 20 MHz clock rate allows the firmware to combine periodic updates with responsive user input, and the hardware multiplier supports multiply-intensive calculations when required by the control algorithm. The memory resources are modest: 8 KB of Flash is intended for compact application code, 1 KB of SRAM must accommodate active variables and the stack, and 128 bytes of EEPROM should be reserved for essential persistent settings. A 20-pin SSOP helps minimize board width, but LED drivers, power conversion stages, current limits, and thermal management remain separate board-design responsibilities that must not be assumed to be integrated into the MCU.
Disebarkan
Appliance User Interfaces
The ATTINY826-XU is well suited to appliance user-interface modules that translate buttons, encoders, display commands, and indicators into compact embedded behavior. Its 8-bit architecture and up-to-20-MHz execution rate are adequate for typical debouncing, menu logic, state management, and serial command handling without imposing a high system power budget. The integrated 8 KB Flash, 1 KB SRAM, and 128-byte EEPROM allow a standalone control design with firmware, working memory, and a small amount of retained configuration. The SSOP package can reduce PCB width in space-constrained appliances, but keypad scanning, display communication, actuator isolation, and protection against electrical transients must be handled by the surrounding circuit. Production firmware should include debounce and fault-state behavior rather than treating every peripheral action as instantaneous.
Disebarkan
Low-Cost Communication Hubs
The ATTINY826-XU can serve as a low-cost protocol hub or command router in a compact embedded product, particularly when the device must maintain deterministic control behavior while exchanging limited data with another controller. The 20 MHz AVR core provides enough timing margin for interrupt-driven serial handling, framing, status updates, and local command processing. Because the device offers 8 KB of Flash and 1 KB of SRAM, designers should establish buffer limits and avoid designs that require large protocol histories or concurrent high-throughput data processing. The 128 bytes of EEPROM can retain selected addresses or operating modes, but wear and write-cycle limits should be considered for frequently changing values. The 20-pin SSOP footprint supports compact implementations, while external transceiver, connector, isolation, and signal-integrity components determine the usable communication distance and robustness.
Disebarkan
Battery-Powered Embedded Products
The ATTINY826-XU can support compact battery-powered products that require local computation without the overhead of a larger system controller. Its 8-bit AVR core, 8 KB Flash, and 1 KB SRAM create a bounded firmware and memory footprint suitable for low-duty-cycle sensing, energy-management, and status-control functions. The 20-pin SSOP package offers a compact assembly option, and the device can retain a small set of operating parameters in 128 bytes of EEPROM between power cycles. The exact battery system cannot be sized from the available device data, so engineers must confirm supply voltage, active and sleep current, clock behavior, and analog or digital peripheral requirements before making a battery-life claim. A production design should include a controlled power-down path, brownout handling, and firmware that minimizes unnecessary peripheral activity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATTINY826-XU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | Microchip Technology |
| Package | 20-pin SSOP |
| Device Type | 8-bit microcontroller |
| Microcontroller Family | tinyAVR 2 |
| CPU Core | AVR with hardware multiplier |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 8 KB |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| Industrial Temperature Grade | 85°C |
Penyeberangsung Jelas
- Full 8 KB program memory in the target SSOP configuration (vsATTINY426-XU)
- Exact package family selected for the target board (vsATTINY826-SUR)
- Broader assembly choice when the PCB is not fixed (vsATTINY826-MFR)
Catatan Desain
Use the ATTINY826 SSOP package drawing and pin-description table before committing PCB land patterns, programming pads, and routing. The ATTINY826-XU is identified as a 20-pin SSOP configuration, so do not reuse a SOIC or VQFN footprint even when another ATTINY826 suffix has similar pin count. Confirm pin 1 orientation, lead pitch, lead span, and the manufacturer keep-out requirements for copper and soldering mask. Adding a programming interface should preserve access without forcing board-space compromises that crowd high-voltage or switching circuitry.
Confirm the device's complete operating-voltage range, I/O limits, and power-consumption characteristics in the manufacturer datasheet before connecting external circuitry. The available product information establishes a 20 MHz maximum clock rate but does not provide the detailed supply thresholds needed for a power-tree design. Place local decoupling at the device supply pins using the capacitance and layout recommended by Microchip, and keep return paths short. If the MCU controls relays, motors, lamps, or other inductive loads, isolate those loads from sensitive signal paths and provide suitable driver protection.
Do not treat every ATTINY826 family member as a source-compatible substitute. ATTINY826-SUR uses a 20-pin SOIC configuration and ATTINY826-MFR is identified as a 20-pin VQFN configuration, so both require different PCB land patterns from the ATTINY826-XU SSOP package. The ATTINY426-XU also uses a 20-pin SSOP-related format but provides 4 KB of Flash rather than 8 KB. Validate memory demand, peripheral mappings, clock configuration, programming method, and all electrical limits before approving any substitution.
Plan firmware and interrupt service requirements against the available 8 KB Flash, 1 KB SRAM, and 128-byte EEPROM before routing the final board. SRAM must accommodate stack depth, call nesting, buffers, and volatile variables, while EEPROM writes should be limited to values that genuinely need nonvolatile retention. Avoid placing long blocking routines inside time-sensitive interrupt handlers. For serial interfaces, maintain short return paths and separate noisy switching nodes from programming and communication conductors.
Maklumat Kesediaan
Microchip product information identifies ATTINY826-XU as Green and lists an 85°C industrial temperature grade. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are included in the available manufacturer and distributor records, so those fields remain unknown.