ATXMEGA16E5-AN - 32MHz 16KB AVR XMEGA | Microchip
MPN: ATXMEGA16E5-AN ✓ AktifATXMEGA16E5-AN Ringkasan
An 8/16-bit microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and I/O into one device. The AVR XMEGA family combines enhanced RISC architecture with an event system and programmable interrupt handling. This places the ATXMEGA16E5-AN in the embedded-control hierarchy of microcontroller, 8/16-bit MCU, low-power control, and programmable logic device.
Key features include 16 KB of ISP flash, a 4 KB boot-code section, read-while-write capability, 2 KB SRAM, and 512 B EEPROM. The eight-channel event system and programmable multi-level interrupt controller support deterministic event handling. Three flexible 16-bit timer/counters with compare modes and PWM, plus one 16-bit real-time counter, cover timing, waveform generation, and periodic control requirements.
The 26 general-purpose I/O lines provide connections for sensors, actuators, communication interfaces, and status indicators. A 32 MHz clock allows the CPU to process control logic and peripheral events efficiently, while the XMEGA E5 architecture is designed for both performance and low power. Its operating supply range of 1.6 V to 3.6 V supports embedded systems using low-voltage rails.
Typical uses include industrial sensor controllers, compact automation equipment, motor and valve control, lighting systems, measurement instruments, and low-power IoT nodes. The combination of event-driven peripherals, PWM-capable timers, and serial interface resources makes the device suitable for designs that require deterministic timing without a large external peripheral set.
When laying out the PCB, place decoupling capacitors close to the supply pins and route sensitive signals away from switching nodes. Confirm the exact 32-pin TQFP pin assignments, programming connections, and peripheral multiplexing in the manufacturer datasheet before finalizing tracks and firmware.
This page consolidates the core memory, timing, interface, and package characteristics with application guidance, replacement analysis, and practical design notes for engineers evaluating the ATXMEGA16E5-AN.
Pilihan pengganti yang segera untuk ATXMEGA16E5-AN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATXMEGA16E5-AN (sama faktor bentuk dan kaki) — berbeza dalam Package, SRAM, Boot Code Section, EEPROM, Event System.
ATXMEGA16E5-AU
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →ATXMEGA32E5-AN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATXMEGA8E5-AN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATXMEGA16E5-AN Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | 8/16-bit AVR XMEGA E5 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| ISP Flash Memory | 16 KB |
| Flash Organization | 8K x 16 bits |
| Boot Code Section | 4 KB |
| Read-While-Write | Supported |
| SRAM | 2 KB |
| EEPROM | 512 bytes |
| Event System Channels | 8 channels |
| General-Purpose I/O Lines | 26 |
| Real-Time Counter | 1 x 16-bit |
| Timer/Counter | 3 x flexible 16-bit with compare modes and PWM |
| Programmable Interrupt Controller | Multi-level |
| Tegangan Pemberi Arus Operasi | 1.6 V to 3.6 V |
| Kemasan | 32-pin TQFP (7 x 7 mm) |
| Jenis Pemasangan | Surface mount |
| Temperature Grade | 105C |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin ATXMEGA16E5-AN 32-pin tqfp (7 x 7 mm)
Konfigurasi pin untuk ATXMEGA16E5-AN (32-pin tqfp (7 x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATXMEGA16E5-AN.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATXMEGA16E5-AN patut untuk 6 aplikasis: Industrial Sensor Controller, Motor and Valve Control, LED Lighting Controller, Measurement and Instrumentation, Low-Power IoT Node, Communication Interface Hub.
Industrial Sensor Controller
The ATXMEGA16E5-AN fits compact sensor-control nodes that need 26 general-purpose I/O lines and deterministic event handling without an external controller. Its 32 MHz execution rate provides headroom for sampling, filtering, and control logic, while the eight-channel event system can connect timers and peripherals without continuous polling. The 16 KB ISP flash and 2 KB SRAM provide useful capacity for protocol handling and local data buffering. Because the device operates from 1.6 V to 3.6 V, it also supports compact low-voltage sensing boards.
Disebarkan
Motor and Valve Control
The three flexible 16-bit timer/counters in the ATXMEGA16E5-AN make it suitable for motor, valve, and actuator control where compare outputs and PWM are useful. The 32 MHz core can coordinate multiple timing functions while the event system links peripheral events to interrupt handling. With 26 I/O lines, a board can combine control outputs, limit inputs, status signals, and communications. Designers should still check the exact timer pin multiplexing and current ratings of external drivers in the manufacturer datasheet.
Disebarkan
LED Lighting Controller
The ATXMEGA16E5-AN can drive programmable LED effects, status indicators, and lighting sequences using its PWM-capable 16-bit timers. Thirty-two megahertz operation leaves room for animation, calibration, and communication tasks beyond simple timing. The 2 KB SRAM is useful for display buffers and effect parameters, while the 16 KB flash can hold multiple lighting profiles. Its low-voltage 1.6 V to 3.6 V operating range suits compact LED modules, subject to the output-current and timing-pin requirements of the selected LED driver.
Disebarkan
Measurement and Instrumentation
The ATXMEGA16E5-AN is appropriate for compact measurement equipment that needs multiple timers, event-based acquisition, and moderate local processing. Its 32 MHz clock supports faster sampling loops, while three 16-bit timer/counters can handle measurement intervals, capture functions, and PWM outputs. The 512-byte EEPROM preserves small configuration values, while 2 KB SRAM supports acquisition buffers and interface state. For high-accuracy analog measurement, the MCU can coordinate external converters and sensors while keeping control logic on the same board.
Disebarkan
Low-Power IoT Node
The ATXMEGA16E5-AN supports low-power IoT nodes that combine sensor conditioning, local logic, and communications in a 1.6 V to 3.6 V design. Its 2 KB SRAM and 16 KB flash are suitable for small protocol stacks and event-driven control, while the event system can reduce reliance on continuous CPU polling. Low-power operation still depends on the selected clock mode, active peripherals, sleep configuration, and the behavior of attached sensors. Validate the duty cycle and wake-up sequence during firmware and board-level testing.
Disebarkan
Communication Interface Hub
The ATXMEGA16E5-AN can serve as a protocol hub or bridge when a design needs several serial functions and event-driven data movement. The 26 I/O lines and three 16-bit timers provide resources for serial links, status signaling, baud timing, and local buffering. At 32 MHz, it can handle framing, protocol conversion, and supervisory logic while the event system coordinates peripheral activity. Pin multiplexing must be reviewed against the selected communication peripherals, and firmware should include flow control for sustained high-volume transfers.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATXMEGA16E5-AN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATXMEGA16E5-AU | ATXMEGA32E5-AN | ATXMEGA8E5-AN |
|---|---|---|---|---|
| Package | 32-TQFP (7x7) | 32-TQFP (7x7) | 32-TQFP (7x7) | 32-TQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| ISP Flash Memory | 16 KB | 16 KB | 32 KB | 8 KB |
| SRAM | 2 KB | 2 KB | 4 KB | 1 KB |
| EEPROM | 512 bytes | 512 bytes | 1 KB | 512 bytes |
| General-Purpose I/O Lines | 26 | 26 | 26 | 26 |
| Event System Channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Operating Supply Voltage | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
Penyeberangsung Jelas
- Balanced memory capacity within the XMEGA E5 family (vsATXMEGA8E5-AN)
- Lower memory demand than the largest E5 member (vsATXMEGA32E5-AN)
- Event-driven control with three PWM-capable timers (vsATXMEGA8E5-AN)
Catatan Desain
Place the required supply-decoupling capacitors adjacent to the ATXMEGA16E5-AN power pins and provide a short return path to the ground plane. Route high-current switching-node traces and external clock or sensor signals away from the MCU supply area. Because several XMEGA peripheral functions can share the same pins, freeze the pin-assignment table from the datasheet before routing the 32-pin TQFP footprint.
Design the 1.6 V to 3.6 V supply rail so it remains within the ATXMEGA16E5-AN operating limits at the highest specified processing frequency, peripheral load, and temperature. Separate noisy switching-regulator output from sensitive analog sections when possible. Confirm startup behavior, power-supply sequencing, and brownout conditions in the manufacturer electrical-characteristics documentation before production release.
Do not select ATXMEGA8E5-AN merely because it uses the same 32-pin family package: its 8 KB flash and 1 KB SRAM are lower than the target's 16 KB and 2 KB. Likewise, verify the exact suffix, package dimensions, temperature marking, and programming interface for ATXMEGA16E5-AU. Any substitution should be checked against compiled code size, stack requirements, peripheral multiplexing, and boot configuration.
Maklumat Kesediaan
RoHS compliance is identified by the component comparison information. Other compliance attributes are not stated and remain unknown.
