BCM8705BIFBG - 10GbE Fibre Channel Transceiver | Broadcom
MPN: BCM8705BIFBG ✗ Akhir HayatBCM8705BIFBG Ringkasan
A network transceiver is an interface integrated circuit that converts parallel or wide digital data into a high-speed serial signal for transmission over copper or optical links. Within the interface-IC hierarchy, BCM8705BIFBG belongs to the serial network transceiver class, where physical-layer signaling, lane timing, and link compatibility determine whether a device can operate with a given optical module, host ASIC, or backplane. The XAUI interface provides the high-speed parallel-side connection, while XFI provides a serial electrical connection suitable for an external transceiver path.
The principal documented features are support for 10GbE and 10GFC operation, an XAUI-to-XFI LANPHY architecture, an integrated WIS layer, and a 10GbE-oriented Fibre Channel transceiver function. These characteristics position the part for data-center, storage, and networking equipment in which a host controller requires a dedicated high-speed backplane or optical-module interface rather than a general-purpose I/O device.
The BCM8705BIFBG belongs to a specialized high-speed interface family rather than a general-purpose processor or transceiver IC. Its protocol-specific purpose is important: system designers should verify the Broadcom datasheet for supported lane rates, electrical characteristics, reference-clock requirements, transceiver interfaces, reset behavior, and application-specific timing before treating it as a universal 10GbE building block. Those details also determine whether an existing board can use the BCM8705LBIFBG comparison part.
Typical uses include 10GbE switching equipment, 10GFC storage systems, server and data-center interconnect designs, and optical-module interface boards. The XAUI-side connection suits equipment that divides a 10GbE or 10GFC link across multiple lanes, while the XFI LANPHY side connects the transceiver toward an optical or copper signaling chain when the remaining interface characteristics match.
A key design consideration is verification of the complete link architecture. The host ASIC, reference clock, lane mapping, module interface, power rails, reset sequencing, and board-level signal integrity must be evaluated together. Confirm the exact pinout and exposed-pad requirements in the manufacturer datasheet before laying out a replacement PCB or assembling a prototype.
This page combines the identified BCM8705BIFBG product information, a documented Broadcom-family comparison candidate, interface-specific application guidance, and practical replacement-selection considerations. It is intended to help engineers narrow the decision quickly while keeping final compatibility checks focused on the authoritative Broadcom documentation.
Pilihan pengganti yang segera untuk BCM8705BIFBG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera BCM8705BIFBG (sama faktor bentuk dan kaki) — berbeza dalam Product Type.
BCM8705LBIFBG
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →BCM8705BIFBG Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Serial 10GbE/Fibre Channel channel transceiver |
| Supported Networking Rate | 10 GbE |
| Supported Fibre Channel Rate | 10GFC |
| Host-Side Interface | XAUI |
| Line-Side Interface | XFI LANPHY |
| Protocol Layer | WIS layer |
| Manufacturer | Broadcom |
| Device Category | Integrated Circuits (ICs) |
| Jenis Pemasangan | Surface mount |
| Manufacturer Pack Quantity | 1 unit |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Supply and Demand Status | Limited quantity |
Panduan Konfigurasi Pin BCM8705BIFBG standard
Konfigurasi pin untuk BCM8705BIFBG (standard pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk BCM8705BIFBG.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
BCM8705BIFBG patut untuk 6 aplikasis: 10GbE Switching Equipment, 10GFC Storage Systems, Data-Center Interconnect, Server Network Interface Cards, Optical Module Interface Boards, Fibre Channel Edge Equipment.
10GbE Switching Equipment
The BCM8705BIFBG fits a 10GbE switching design that needs an XAUI host connection and an XFI LANPHY path toward an optical or copper transceiver stage. Its documented 10GbE and XAUI-to-XFI architecture places it between a high-speed switching ASIC and the physical link equipment. The WIS layer may provide the protocol handling needed for that channel. Final suitability depends on matching the host lane rates, reference clock, electrical timing, reset sequence, and module interface to the Broadcom requirements. Board validation should include signal-integrity and compliance testing at the intended 10GbE operating conditions.
10GFC Storage Systems
The BCM8705BIFBG is relevant to 10GFC storage systems because Broadcom identifies the device as a serial 10GbE/Fibre Channel channel transceiver with WIS support. It can be evaluated where a storage or switching ASIC presents XAUI and the external channel requires XFI LANPHY connectivity. The part must support the exact Fibre Channel operating mode and timing used by the controller, while preserving the required lane ordering and reference clock. Power sequencing, package thermal performance, and connector or optical-module integration remain important system-level checks before production release.
Data-Center Interconnect
A data-center interconnect can use BCM8705BIFBG where the board architecture converts a high-speed ASIC interface into a serial 10GbE channel. The XAUI side is suited to a wide parallel link from the network processor, and the XFI LANPHY side supports connection toward the appropriate optical or copper physical layer. This arrangement can simplify the division of a 10GbE channel into a high-density board interface. Engineers should verify lane width and mapping, clocking, reset behavior, power rails, and channel-loss margins against the manufacturer specifications, then validate interoperability with the selected line-side equipment.
Server Network Interface Cards
BCM8705BIFBG can be considered in a server network interface card that accepts an XAUI connection from a host controller and translates the channel toward an XFI-compatible transceiver stage. Its 10GbE support makes it applicable to single-port 10GbE server connectivity, while the documented 10GFC capability serves storage-facing designs. A board-level implementation must account for connector reach, power sequencing, reference-clock quality, lane routing, and thermal conditions. Because transceiver compatibility is system-specific, confirm protocol mode and electrical requirements for every optical module or copper partner used with the design.
Optical Module Interface Boards
The BCM8705BIFBG is applicable to an optical-module interface board that bridges an XAUI source and an XFI LANPHY-facing module path. This arrangement allows a high-speed host ASIC to retain a multi-lane board interface while the external module handles the physical optical conversion. The WIS layer and 10GbE/10GFC positioning make the device a candidate for high-speed networking and Fibre Channel channels. Design verification should cover module vendor requirements, reference-clock topology, lane polarity and mapping, power states, signal loss, and whether the selected module supports the same XFI electrical mode.
Fibre Channel Edge Equipment
BCM8705BIFBG can be evaluated in Fibre Channel edge equipment that requires a dedicated 10GFC serial channel and a high-speed ASIC-facing interface. Its XAUI-to-XFI LANPHY organization supports systems where the controller and external channel device are separated through a defined board interface. The device should be selected only when its Broadcom documentation confirms the required Fibre Channel mode, clocking behavior, error handling, and timing. Environmental and lifecycle planning should also consider the target operating temperature, manufacturing schedule, and availability because those details are not established by the product-search records.
Data referensi kejuruteraan untuk BCM8705BIFBG — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | BCM8705LBIFBG |
|---|---|---|
| Brand | Broadcom | Broadcom |
Penyeberangsung Jelas
- Purpose-built 10GbE and 10GFC channel support (vsBCM8705LBIFBG)
- Defined XAUI-to-XFI LANPHY architecture (vsBCM8705LBIFBG)
- Traceable Broadcom ordering identity (vsBCM8705LBIFBG)
Catatan Desain
Use the manufacturer pin and package drawings as the controlling references for all nets. The available product record does not identify the exact package or expose the complete pinout, so do not infer ball, lead, pad, or exposed-thermal-pad assignments from the BIFBG suffix. Route XAUI and XFI as controlled-impedance high-speed interfaces, keep the clock and power-distribution networks short, and follow the manufacturer reference-layout recommendations for via, return-path, and decoupling geometry.
Validate the complete 10GbE or 10GFC channel rather than testing only the transceiver in isolation. Use the manufacturer's reference-clock, receiver, transmitter, package, and application guidance to establish lane timing, insertion-loss, return-loss, jitter, and crosstalk limits. PCB material, layer stackup, connector or module transitions, and retimer placement can all change the result. Compare eye and mask measurements against the applicable system specification before release.
Confirm the BCM8705BIFBG supply-voltage range and current limits in the Broadcom datasheet before designing the power tree. Decouple each supply according to the manufacturer circuit, placing the required high-frequency and bulk capacitors close to the device pins. Account for startup order, ramp time, sequencing between XAUI and XFI domains, and the thermal load of the complete transceiver module rather than the IC alone.
Do not treat BCM8705LBIFBG as a confirmed drop-in replacement merely because the MPNs share the BCM8705 family. Compare the two manufacturer documents line by line for pinout, package, XAUI and XFI electrical specifications, clock requirements, reset behavior, WIS support, temperature grade, qualification, and lifecycle. Record whether any change requires PCB, firmware, host-ASIC, or optical-module qualification before authorizing a substitution.
Maklumat Kesediaan
The available product records do not establish the requested compliance statuses. The indexed component record specifies MSL 3 with a 168-hour floor life and a manufacturer pack quantity of one.