ROHM Semiconductor

BD3897FV-TE2 Shock Sensor Processor | ROHM Semiconductor

MPN: BD3897FV-TE2 ✓ Aktif
SSOP package Package
MOQ: 1 |
Datasheet Tidak Dapat Ditemui Cari Atashef
Lihat Alternatif

BD3897FV-TE2 Ringkasan

ROHM Semiconductor BD3897FV-TE2 is an integrated shock-sensor processor in an SSOP package. It is categorized as a sensor and detector interface IC and is intended to form the conditioning stage between a mechanical shock or acceleration sensing element and a downstream control system. The device is offered with the TE2 ordering suffix, while the related BD3897FV-E2 designation also appears in the manufacturer’s component listings. Its primary engineering role is to convert a shock-related sensor signal into information suitable for further evaluation, threshold detection, protection, or diagnostic processing.

A shock sensor processor is a specialized interface IC within the broader sensor and detector interface hierarchy. Mechanical sensors can produce small electrical signals whose amplitude, polarity, and frequency depend on shock magnitude, sensor construction, mounting conditions, and the frequency of the mechanical event. An interface processor conditions this signal before it reaches an MCU, analog front end, or system controller. This placement reduces the amount of analog signal handling required at the host processor and allows the system to react consistently to detected mechanical events.

The BD3897FV-TE2 is identified as an IC shock sensor processor and uses an SSOP package suitable for compact surface-mounted circuit-board designs. The related BD3897FV-E2 listing places the same BD3897FV family in the sensor and detector interface category. Catalog information identifies the target as a lead-free, RoHS-compliant part. Engineering decisions regarding supply voltage, signal bandwidth, response threshold, output logic, temperature range, and package dimensions should be made from the manufacturer datasheet rather than inferred from the ordering code.

The BD3897FV family is suited to circuits that detect impact, mechanical disturbance, or shock in equipment. Depending on the external sensor and system architecture, the interface stage may participate in amplification, filtering, comparison, or signal conversion. The exact signal path and internal functions must be confirmed from the device documentation before signal-path simulation or PCB release. In particular, engineers should verify the supported sensor type, excitation method, input range, response time, logic levels, and external component requirements for the selected implementation.

Typical equipment categories include protective sealing systems, industrial machinery, transport equipment, consumer devices, and portable products that may experience mechanical shocks. A compact interface IC can simplify the physical implementation of a dedicated sensing channel, especially when the host system already performs event classification or reporting. Selection should account for sensor sensitivity, shock-frequency coverage, false-trigger behavior, environmental conditions, and whether the application requires latching, interrupt, analog, or digital signaling.

For PCB implementation, place the sensor and its recommended passive components close to the BD3897FV-TE2 to minimize sensitive-trace length and unwanted coupling. Route high-current or rapidly switching signals away from the sensing path, maintain a stable return-current reference, and use the package drawing and pin-description table from the manufacturer datasheet when assigning land patterns. Confirm grounding, filtering, and bypass requirements against the application circuit before production release.

This page identifies the component, distinguishes the TE2 designation from the related E2 listing, records sourcing and lifecycle information, and organizes the relevant engineering cautions into practical application and PCB guidance. It is intended to help engineers identify the correct device quickly while directing all safety-critical, electrical-limit, and pin-level decisions to the authoritative manufacturer documentation.

Pilihan pengganti yang segera untuk BD3897FV-TE2 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

BD3897FV-E2

✅ Masuk Drop-In
ROHM Semiconductor
📦 SSOP
Integrated signal processor IC · Knock-sensor signal processing · Sensor and detector interface IC · Input and output interface IC · SSOP · 16 pins · Surface mount · Tape and reel

Hubungi untuk harga

Lihat Datasheet →

BD3897FV-TE2 Penilaian maksimum & Ciri-ciri Elektrik

Product Type Shock sensor processor IC
Manufacturer ROHM Semiconductor
Kemasan SSOP package
Device Category Sensor and detector interface
Jenis Pemasangan Surface mount
Lead-Free Status Lead free
Status RoHS Compliant
Target Ordering Suffix TE2
Related Family Designation BD3897FV-E2

Panduan Konfigurasi Pin BD3897FV-TE2 ssop package

Konfigurasi pin untuk BD3897FV-TE2 (ssop package pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai ssop package untuk BD3897FV-TE2

Tiada data garisan pin yang diperoleh untuk BD3897FV-TE2.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

BD3897FV-TE2 patut untuk 6 aplikasis: Industrial machinery impact detection, Transport equipment mechanical protection, Protective sealing and packaging systems, Portable device drop detection, Consumer appliance impact sensing, Test and measurement shock channels.

🏭

Industrial machinery impact detection

The BD3897FV-TE2 can serve as the dedicated interface stage for a mechanical shock-detection channel in industrial machinery. Its cataloged role as a shock sensor processor makes it appropriate to place near the sensing element and ahead of an MCU or programmable controller. The external sensor and conditioning components must be selected to match the application’s shock magnitude, frequency range, and false-alarm requirements. Because the SSOP package supports compact surface-mount layouts, the interface can be placed close to the sensor while keeping sensitive traces short. Confirm the device’s documented sensor excitation, input limits, response behavior, supply voltage, and output logic before finalizing the circuit.

🚗

Transport equipment mechanical protection

BD3897FV-TE2 is applicable to transport equipment that must identify mechanical shocks or handling events. The IC can occupy the interface position between a suitable motion or piezoelectric sensing element and a vehicle controller, allowing the control system to distinguish an event from normal vibration. Signal-path design should account for the sensor’s sensitivity and the environmental noise present in transport environments. The SSOP package permits compact placement close to the sensing assembly, which can reduce susceptibility to interference over long unprotected traces. Verify electrical ratings, temperature limits, output behavior, and external-component requirements against the manufacturer documentation before integrating it into a safety-related or high-reliability system.

📦

Protective sealing and packaging systems

The BD3897FV-TE2 can support shock-detection circuitry in protective sealing, packaging, and tamper-monitoring systems. In these applications, the shock sensor processor may sit between a mechanical event sensor and a controller that records, counts, or reports an impact. Compact SSOP construction is useful when the sensing electronics must fit within a constrained enclosure or connector assembly. To obtain reliable event detection, match the sensor’s mechanical response and sensitivity to the thresholds required by the product. Engineers should also verify the IC’s documented input range, response characteristics, supply requirements, and output logic. Final layout should separate event-sensing traces from switching supplies and noisy motor or relay returns.

📱

Portable device drop detection

BD3897FV-TE2 is suited to portable equipment that needs a dedicated path for detecting mechanical shocks or drops. The shock sensor processor can connect to an external motion-sensing element and provide conditioned information to a host MCU for event logging or operational control. Placement near the sensor limits the length of sensitive connections and helps maintain a consistent signal path across the assembly. Designers should evaluate the acceleration range, impact bandwidth, response delay, and false-trigger probability required by the product, then compare them with the manufacturer’s documented limits. Confirm supply-voltage tolerance, interface logic, package dimensions, and decoupling requirements before laying out the portable-product circuit board.

🔧

Consumer appliance impact sensing

The BD3897FV-TE2 can be incorporated into consumer appliances that detect mechanical impacts during use, shipping, or maintenance. A dedicated shock sensor processor allows appliance electronics to observe a sensing element without requiring every analog conditioning function to be implemented in the main controller. The SSOP package supports space-constrained surface-mount assemblies and can be positioned near the structure that experiences the strongest mechanical coupling. Engineering teams should establish the required shock threshold, allowable response time, and event-reporting behavior before selecting external components. The device’s electrical limits, sensor interface details, pin functions, and environmental ratings must be verified in the ROHM Semiconductor documentation for the exact ordering suffix.

🖥️

Test and measurement shock channels

BD3897FV-TE2 is applicable to test and measurement equipment that requires a dedicated channel for observing mechanical shock events. The IC can serve as the interface between a calibrated sensing element and acquisition or control electronics, enabling repeatable measurement of impact onset and system response. Instrumentation designs should prioritize the sensor’s frequency response, dynamic range, noise performance, and mounting consistency because these factors determine whether the shock event is represented accurately. Keep the SSOP device and associated passive components close together, use a stable ground reference, and isolate the channel from high-energy switching paths. Confirm input range, bandwidth, response timing, and output behavior using the manufacturer datasheet before calibration.

What is the BD3897FV-TE2?
The BD3897FV-TE2 is a ROHM Semiconductor integrated circuit classified as a shock sensor processor. It is listed in an SSOP package and belongs to the sensor and detector interface category. According to the ROHM Semiconductor product listing, the device provides the interface stage between a shock-sensing element and the system electronics, although its detailed electrical functions must be confirmed in the manufacturer datasheet.
Where can I find the BD3897FV-TE2 datasheet PDF?
The BD3897FV-TE2 datasheet should be obtained from the ROHM Semiconductor product documentation for the BD3897FV family. The component is identified as an SSOP shock sensor processor, but the exact PDF address and document revision are not listed in the catalog information shown here. Use the manufacturer part search for BD3897FV and verify that the downloaded document covers the TE2 ordering designation before releasing the design.
What package does BD3897FV-TE2 use?
The BD3897FV-TE2 uses an SSOP package. Component listings identify the family as an IC shock sensor processor in SSOP form, making it a compact surface-mount option for sensor interface boards. Before laying out the PCB, use the manufacturer package drawing and pin-description table to confirm the exact lead count, body dimensions, pin spacing, and exposed-pad requirements.
What is the difference between BD3897FV-TE2 and BD3897FV-E2?
The BD3897FV-TE2 and BD3897FV-E2 belong to the same ROHM Semiconductor BD3897FV family, but their ordering suffixes are different. The available listings identify both as shock-sensor-related integrated circuits, while the target additionally carries the TE2 suffix. Do not assume that suffix-only interchangeability is sufficient; confirm the pinout, temperature grade, packing method, and electrical limits in the manufacturer ordering information.
Can BD3897FV-E2 replace BD3897FV-TE2?
The BD3897FV-E2 is the closest listed same-brand candidate for BD3897FV-TE2 because it appears in the manufacturer’s component listings under the same BD3897FV family. Pin-for-pin interchangeability still requires confirmation of package lead count, pin functions, temperature rating, and ordering code. Treat it as a candidate drop-in rather than a validated substitute until those items match.
What can replace the BD3897FV-TE2?
The BD3897FV-E2 is the only directly identified same-family replacement candidate for the BD3897FV-TE2. No cross-brand part has been established as pin-compatible from the available catalog information. For a production redesign, compare the complete manufacturer ordering table, pin descriptions, electrical characteristics, package drawing, and lifecycle notices before treating any alternative as a drop-in replacement.
Is there a cross-brand equivalent for BD3897FV-TE2?
No cross-brand equivalent has been validated for the BD3897FV-TE2 from the available cross-reference information. The part is a specialized shock sensor processor, so a valid substitute must match not only the SSOP footprint but also the supported sensor interface, electrical limits, timing behavior, output logic, and environmental ratings. Select a cross-brand candidate only after a detailed manufacturer comparison confirms those requirements.
When should I choose BD3897FV-TE2 over BD3897FV-E2?
Choose BD3897FV-TE2 when the bill of materials specifically requires the TE2 ordering designation, packing configuration, temperature grade, or regional supply arrangement associated with that suffix. Choose BD3897FV-E2 only when its ordering information confirms equivalent electrical and environmental requirements. Both are listed within the BD3897FV family, but suffix differences should be resolved against the manufacturer’s ordering guide.
Is BD3897FV-TE2 suitable for a mechanical shock detector?
The BD3897FV-TE2 is suitable for evaluating a mechanical shock-sensing channel because it is specifically classified as a shock sensor processor. Its suitability depends on matching the external sensor characteristics and application requirements to the device’s documented input and signal-processing specifications. Confirm sensor excitation, frequency response, detection threshold, output behavior, supply voltage, and environmental limits before implementation.
What key specifications should engineers check for BD3897FV-TE2?
Engineers should check the BD3897FV-TE2 input voltage range, supported sensor type, response time, output interface, operating temperature range, and exact SSOP dimensions. The catalog listing establishes the part number, shock-sensor-processor function, SSOP package, and RoHS-compliant lead-free status. Numerical electrical and timing limits require the manufacturer datasheet because they are not stated in the component listings.
How should BD3897FV-TE2 be placed on a PCB?
Place the BD3897FV-TE2 close to the shock sensor and any recommended passive components to reduce sensitive-signal trace length and susceptibility to coupling. Keep switching-node and high-current paths physically separated from the sensing channel, and provide a low-impedance return reference. The SSOP footprint and decoupling requirements must be taken from the manufacturer package drawing and recommended application circuit.
Where can I buy BD3897FV-TE2 and check its price?
Use the Request a Quote form on this page to inquire about BD3897FV-TE2 availability, current pricing, and lead time. The BD3897FV-TE2 is listed under ordering code 846-BD3897FV-TE2TR-ND, and current commercial availability should be confirmed during quotation rather than inferred from an older catalog page.
What is the lead time and stock status for BD3897FV-TE2?
Current stock and lead time for the BD3897FV-TE2 should be confirmed through the Request a Quote form on this page. The available component listing identifies the exact TE2 ordering variant and its associated order code, but it does not provide a stable current inventory count or production lead-time commitment. A quotation response should identify the package, quantity, delivery schedule, and traceability requirements.
Is BD3897FV-TE2 RoHS compliant?
The BD3897FV-TE2 is identified as RoHS compliant and lead free in the available component information. Its category is a sensor and detector interface IC, and it is supplied in an SSOP package. For a released product, request the current ROHS and material compliance declaration from ROHM Semiconductor to confirm the exact revision and manufacturing status.
Where can I find the BD3897FV-TE2 pinout?
The BD3897FV-TE2 pinout is located in the pin-description table of the ROHM Semiconductor BD3897FV datasheet. The component is confirmed as an SSOP shock sensor processor, but a complete numbered pin list and exact package drawing are required to prevent errors in footprint or signal assignment. Download the current manufacturer documentation and cross-check pin numbering before PCB layout release.

Data referensi kejuruteraan untuk BD3897FV-TE2 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the BD3897FV-TE2 when the production BOM, approved vendor list, or device drawing requires the exact TE2 ordering designation. It is the primary cataloged option for a shock-sensor interface implemented in an SSOP package. Consider the BD3897FV-E2 only after checking the manufacturer ordering table for electrical, environmental, pinout, and packing equivalence. No cross-brand substitute is established, so a functional-equivalent design may require a different IC, external signal-chain redesign, or a validated supplier-supported cross reference. For either ordering code, the final selection must be based on sensor compatibility, supply voltage, response characteristics, output logic, temperature range, package dimensions, and lifecycle status. Do not release a footprint or production BOM until those parameters are confirmed from current ROHM Semiconductor documentation.

Perbandingan dengan Gantian

Parametr Produk Ini BD3897FV-E2
Package SSOP SSOP
Brand ROHM Semiconductor ROHM Semiconductor
Product Function Shock sensor processor Shock sensor signal processor
Device Category Sensor and detector interface Sensor and detector interface
Ordering Suffix TE2 E2

Penyeberangsung Jelas

  • Exact TE2 ordering configuration (vsBD3897FV-E2)
  • Purpose-defined shock-sensor interface function (vsBD3897FV-E2)
  • Compact surface-mount implementation (vsBD3897FV-E2)

Catatan Desain

Place the BD3897FV-TE2 close to the external shock sensor and the passive components specified by the manufacturer. Short sensitive traces reduce coupling from switching supplies, motor returns, and digital clocks. Route the shock-sensing path over a continuous ground reference, maintain separation from high-current paths, and use the manufacturer drawing to establish the exact SSOP land pattern before fabrication.

Do not treat BD3897FV-TE2 and BD3897FV-E2 as interchangeable solely because they share the BD3897FV family name. Compare the ordering suffix, lead count, pin functions, temperature grade, packing method, and electrical limits. A mismatched suffix can affect procurement or qualification even when the external package family appears the same, and an incorrect pin count can prevent a valid footprint from being selected.

Design the sensor interface around the manufacturer’s recommended sensor configuration and supported frequency range. Mechanical events and high-energy edges can couple into the input path, so use a stable reference, decouple supply pins as documented, and avoid routing the sensor connection beneath noisy sources. Validate noise immunity and false-event behavior in the final mechanical enclosure rather than relying only on schematic-level checks.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The component information identifies BD3897FV-TE2 as lead free and RoHS compliant. No specific REACH, halogen-free, conflict-minerals, or automotive qualification declaration is listed.

Data disahkan pada: 2026-11-11 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

BD3897FV-TE2 BD3897FV-TE2 datasheet BD3897FV-TE2 pinout BD3897FV-TE2 datasheet pdf BD3897FV-TE2 equivalent BD3897FV-TE2 replacement BD3897FV-TE2 SSOP package BD3897FV-TE2 price BD3897FV-TE2 stock ROHM BD3897FV-TE2 BD3897FV-TE2 vs BD3897FV-E2 BD3897FV-TE2 shock sensor

Komponen dan Tanda berkaitan

ROHM Semiconductor BD3897FV-TE2 BD3897FV-E2 BD3897FV shock sensor processor sensor and detector interface integrated circuit IC motion sensor mechanical shock sensor signal conditioning SSOP surface-mount package RoHS lead-free industrial machinery transport equipment portable electronics consumer appliances test and measurement
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ