C8051F221R - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs (Tape & Reel)
MPN: C8051F221R ✓ AktifC8051F221R Ringkasan
A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one chip. The 8051 instruction set and embedded-control architecture place this device within the microcontroller hierarchy: C8051F2xx family -> 8051-compatible MCU -> mixed-signal microcontroller -> embedded processor -> semiconductor. Mixed-signal MCUs combine digital control with analog measurement or comparison functions, reducing the number of discrete components required in instrumentation and control products.
The C8051F221R provides an 8-bit ADC with a 22-channel input multiplexer. Port I/O can be assigned as ADC inputs during operation, while the analog section supports throughput up to 100 ksps. The integrated analog peripherals make the MCU useful for sensor acquisition, threshold detection, process monitoring, and compact industrial control panels. The supplied search data identifies 25 MIPS performance, 8 kB of ISP Flash, and an 8-bit ADC, while another result lists 256 x 8 RAM organization.
Communication and programming are supported through the C8051F2xx mixed-signal platform and ISP-oriented Flash. ISP capability lets a production or field-update workflow program Flash without a separate programming socket, provided the board exposes the required programming interface and supports the associated operating procedure. Designers should consult the manufacturer datasheet for exact ISP pin requirements, clock limits, and reset behavior before laying out a programming connector.
The 32-LQFP package exposes digital I/O and analog inputs while supporting compact surface-mount assembly. Its 7 x 7 mm body is larger than the smallest leadless packages but easier to inspect and solder than a very fine-pitch BGA. Adequate soldermask-defined land patterns, thermal vias where appropriate, and clean supply decoupling are necessary for reliable production assembly.
Typical applications include industrial process measurement, environmental sensor interfaces, digital potentiometer and threshold-control systems, panel controls, and compact embedded instruments. When selecting the MCU, verify that the required I/O count, ADC input assignment, programming method, memory footprint, and 2.7 V to 3.6 V power supply match the complete board architecture.
This page consolidates verified distributor specifications, package information, analog-feature details, application guidance, and drop-in comparison data. It also distinguishes confirmed values from specifications that require confirmation in the manufacturer datasheet, helping engineers make faster sourcing and design decisions without relying on generic microcontroller assumptions.
Pilihan pengganti yang segera untuk C8051F221R — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera C8051F221R (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Package, ADC Maximum Throughput, Flash Memory, ADC External Inputs.
C8051F221-GQR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
C8051F221-GQ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
C8051F220
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →C8051F206
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →C8051F310
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →C8051F221R Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit mixed-signal microcontroller |
| Core / Series | 8051-compatible C8051F2xx |
| Frekuensi Klock Maksimum | 25 MHz |
| Maximum Throughput | 25 MIPS |
| Flash Memory | 8 KB (8K x 8) |
| RAM Size | 256 x 8 bits |
| ADC Resolution | 8 bits |
| ADC Channel Count | 22 channels |
| ADC External Inputs | 22 inputs; each port I/O can be configured as an ADC input on the fly |
| ADC Maximum Throughput | 100 ksps |
| ADC Integral Nonlinearity | +/-1/2 LSB |
| Comparator Count | 2 |
| Comparator Hysteresis | Programmable |
| Tegangan Pemberi Arus | 2.7 V to 3.6 V |
| Kemasan | 32-LQFP (7 x 7 mm) |
| Jenis Pemasangan | Surface Mount |
| Programming Memory Type | ISP Flash |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin C8051F221R 32-lqfp (7 x 7 mm)
Konfigurasi pin untuk C8051F221R (32-lqfp (7 x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk C8051F221R.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
C8051F221R patut untuk 6 aplikasis: Industrial Process Measurement, Environmental Sensor Interface, Digital Potentiometer Control, Threshold Detection and Control, Embedded Instrumentation Panel, Programmable Control Module.
Industrial Process Measurement
The C8051F221R suits compact process-measurement panels where multiple analog inputs must be scanned and converted without adding a separate ADC. Its 22-channel ADC multiplexer accepts up to 22 external inputs, while individual port I/O pins can be assigned as ADC inputs on the fly. The 8-bit resolution and throughput up to 100 ksps support supervisory measurements such as pressure, level, or potentiometer positions. For reliable industrial operation, use the 2.7 V to 3.6 V supply range, provide input filtering referenced to the device ground, and calibrate offset and gain after installation. The ISP Flash also permits firmware updates without removing the controller from its enclosure.
Disebarkan
Environmental Sensor Interface
The C8051F221R can acquire outputs from resistive, analog, or threshold-based environmental sensors and convert them into control decisions. Its integrated 22-channel ADC reduces system component count, and the two comparators with programmable hysteresis are useful for detecting sensor thresholds without continuously software-filtering every transition. At 8-bit resolution and up to 100 ksps, the converter is appropriate for slow environmental variables and moderate multiplexing requirements. Keep sensor excitation and signal ground carefully arranged to avoid corrupting the measured value, especially when using long cables. The 8 KB ISP Flash provides room for calibration tables and periodic logging logic within the device's 256-byte RAM working space.
Disebarkan
Digital Potentiometer Control
The C8051F221R can replace resistor-based set-point adjustment with a digital potentiometer controlled by its port pins. In this arrangement, the MCU writes the desired wiper position, monitors the analog network through its ADC, and can use comparator hysteresis to detect crossing points. The 22 available ADC channels allow one analog control loop to coexist with several supervisory inputs, while the 25 MHz core supports responsive updates and local calculations. Designers should verify the ADC input impedance and acquisition requirements against the external network, and avoid using an ADC channel as a precision measurement source when it is simultaneously driving or heavily loading the analog circuit.
Disebarkan
Threshold Detection and Control
Two integrated comparators with programmable hysteresis make the C8051F221R appropriate for independent threshold detection, alarm generation, and simple control loops. The MCU can combine comparator events with digital inputs while its ADC handles proportional measurement of the same physical variable. This division between fast threshold detection and sampled analog measurement can improve responsiveness without requiring a high-rate conversion loop. Firmware must define debounce and fault behavior, while the PCB should keep comparator inputs away from switching nodes. Because the 2.7 V to 3.6 V operating range is relatively narrow, supply regulation and analog-reference integrity are central to repeatable threshold performance.
Disebarkan
Embedded Instrumentation Panel
The C8051F221R fits compact instrumentation front ends that combine sensor conditioning, local control, status indication, and serial communication. Its 8051-compatible core offers familiar software development, while 8 KB of ISP Flash accommodates application firmware, calibration constants, and a bootloader. The 256-byte RAM is adequate for modest control tasks but should be checked carefully if buffering or display data is required. A 32-LQFP 7 x 7 mm footprint simplifies inspection and rework relative to fine-pitch leadless packages. Production designs should provide the manufacturer's ISP programming interface, stable clocking, reset conditioning, and local decoupling so that communications and analog measurements remain reliable.
Disebarkan
Programmable Control Module
The C8051F221R can form the control core of a compact programmable module where analog inputs, threshold events, and discrete outputs must be coordinated. Its 25 MIPS execution capability and 25 MHz maximum clock provide ample headroom for straightforward control algorithms and protocol handling, while the 8051-compatible architecture simplifies migration from existing C8051 code. Because only 8 KB of Flash and 256 bytes of RAM are available, the application should use the ISP Flash efficiently and avoid blocking serial handlers. For production deployment, validate power-up timing, ISP update recovery, I/O levels, and the 32-LQFP solder assembly under the intended temperature and vibration conditions.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk C8051F221R — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | C8051F221R-GQR | C8051F221R-GQ | C8051F220 | C8051F206 | C8051F310 |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) | 32-LQFP (7 x 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
Penyeberangsung Jelas
- Integrated 22-channel analog multiplexer (vsC8051F206)
- Two integrated comparators with programmable hysteresis (vsC8051F310)
- 25 MHz and 25 MIPS processing rate (vsC8051F221R-GQR)
- Low-voltage mixed-signal integration (vsC8051F220)
Catatan Desain
Use the exact 32-LQFP 7 x 7 mm land pattern from the manufacturer package drawing and verify every pin against the ordering suffix before fabrication. Keep the analog inputs away from digital clock and switching traces, provide a continuous ground reference, and place input filtering close to the device. The verified material states that all 22 ADC channels are external inputs and that port I/O can be assigned to the ADC on the fly, so the layout must preserve adequate isolation and routing clearance for those multiplexed functions.
Design the supply rail for the specified 2.7 V to 3.6 V operating range. Place the required bypass capacitors at the device supply pins with short, low-loop-area traces, and separate noisy digital return current from sensitive analog inputs. Estimated example: at 25 MHz, core current must be obtained from the manufacturer operating-current table before selecting a regulator, because the supplied data does not provide I/O current or analog current for a defensible power-budget calculation.
Do not treat C8051F310 or C8051F320 as automatic replacements merely because comparison pages identify them as candidates. Verify the 32-LQFP footprint, pin names, reset and oscillator requirements, supply limits, Flash and RAM capacity, ADC channels, comparator assignments, and ISP programming pins. The supplied evidence is sufficient to identify C8051F221R-GQR and C8051F221R-GQ as same-device ordering options, but broader substitutions still require direct comparison with the manufacturer datasheet and errata.
For mixed-signal measurements, use a quiet analog ground strategy and route analog returns without crossing high-current digital return paths. The 100 ksps maximum ADC throughput is a capability limit rather than a requirement to sample every channel continuously; acquisition time and source impedance determine the usable rate. Validate input settling with the actual sensor network, and include calibration points because the converter is 8-bit and its specified integral nonlinearity is +/-1/2 LSB.
Maklumat Kesediaan
RoHS status is reported as compliant in the verified C8051F221R-GQ technical summary. The supplied data does not explicitly state REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.