C8051F321 - 25MHz 16KB Flash USB 2.0 MCU | Silicon Labs
MPN: C8051F321 ✓ AktifC8051F321 Ringkasan
A microcontroller is a programmable system-on-chip that combines a CPU core, memory, analog peripherals, digital I/O, and communication interfaces. The C8051F321 belongs to the 8-bit microcontroller category and specifically to the C8051F32x family, combining the familiar 8051 instruction architecture with enhanced peripherals, Flash ISP programming, USB connectivity, and mixed-signal measurement capability.
Key features include 25 MIPS execution, 16 KB Flash, a 10-bit ADC with up to 200 ksps conversion performance, 21 I/O ports, and a USB 2.0 full-speed function controller with on-chip clock recovery. The integrated USB transceiver removes the need for a separate USB PHY in direct USB applications. A selectable reference can be supplied from an external VREF pin, VDD, or the internal reference, while an external conversion-start input supports triggered measurement systems.
The pipelined 8051 core provides high throughput for its 8-bit class, while the dedicated USB controller handles enumeration and low-speed or full-speed USB traffic in firmware. The 16 KB Flash capacity suits compact control systems, USB interface accessories, data-acquisition nodes, and human-interface-device designs where code size is moderate but peripheral integration and USB connectivity are valuable.
Typical applications include USB-to-serial adapters, HID controllers, industrial data-acquisition modules, programmable instrumentation, USB-connected sensor nodes, and embedded control boards requiring analog measurement alongside digital communications. Designers should verify the exact package variant and exposed-pad requirements against the manufacturer datasheet before layout release, and must confirm USB impedance, decoupling, and firmware-driver requirements.
This page consolidates verified manufacturer and distributor information, package-specific ordering data, and practical selection guidance for engineers evaluating the C8051F321 in embedded USB and mixed-signal designs.
Pilihan pengganti yang segera untuk C8051F321 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera C8051F321 (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Flash Memory, Package, Product Type.
C8051F320
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →C8051F322
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
C8051F323
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
C8051F324
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
C8051F325
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
C8051F321 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit mixed-signal microcontroller (MCU) |
| Frekuensi Klock Maksimum | 25 MHz |
| Maximum CPU Throughput | 25 MIPS |
| Core Architecture | Pipelined 8051 core |
| Flash Memory | 16 KB (16K x 8) |
| Tegangan Pemberi Arus Operasi | 2.7 V to 3.6 V |
| ADC Resolution | 10 bits |
| ADC Maximum Sampling Rate | 200 ksps |
| ADC Input Configuration | 13 external single-ended or differential inputs |
| ADC Reference Options | External VREF pin, internal reference, or VDD |
| USB Interface | USB 2.0 function controller with integrated transceiver and on-chip clock recovery |
| Number of I/O Ports | 21 |
| External Conversion Start | External conversion-start input |
| Built-in Temperature Sensor | Available through the ADC reference and measurement peripherals |
| Kemasan | 28-MLP QFN (5 x 5 mm) |
| Jenis Pemasangan | Surface mount |
| RoHS Compliance | RoHS compliant |
| Lifecycle Stage | Active |
Panduan Konfigurasi Pin C8051F321 28-mlp qfn (5 x 5 mm)
Konfigurasi pin untuk C8051F321 (28-mlp qfn (5 x 5 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk C8051F321.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
C8051F321 patut untuk 6 aplikasis: USB HID Control Peripherals, USB Data-Acquisition Modules, Industrial Sensor Interface Nodes, Programmable Test and Measurement Instruments, USB-to-Serial and Protocol Adapters, Compact Embedded Control Systems.
USB HID Control Peripherals
The C8051F321 is well suited to USB-connected keyboards, control panels, and other human-interface devices because it combines an integrated USB 2.0 transceiver with a 25 MIPS pipelined 8051 core. The on-chip USB function controller reduces the external interface component count, while 16 KB of Flash provides space for enumeration, descriptor, and input/output routines. Designers should use a dedicated USB-capable 8051 firmware configuration, confirm endpoint requirements, and follow the datasheet's transceiver routing and impedance guidance.
Disebarkan
USB Data-Acquisition Modules
A 10-bit ADC capable of 200 ksps, 13 external single-ended or differential inputs, and multiple reference choices make the C8051F321 practical for compact USB measurement modules. The ADC can be triggered through its external conversion-start input, helping synchronize acquisition with an external sensor or test sequence. The 25 MIPS core can manage sampling control and USB transfer, although the 16 KB Flash limit and 2.7 V to 3.6 V operating range must be checked against the application.
Disebarkan
Industrial Sensor Interface Nodes
The C8051F321 can act as a compact sensor-interface node that gathers analog measurements through its 10-bit ADC and forwards data over USB. Differential input support may simplify interface arrangements for sensors with balanced outputs, while selectable VREF options permit reference planning around the analog subsystem. Firmware can use the 25 MIPS pipelined core for acquisition and packet preparation. The design should still include appropriate input protection, filtering, calibration, and decoupling selected from the manufacturer data sheet.
Disebarkan
Programmable Test and Measurement Instruments
Integrated USB and a fast successive-approximation ADC allow the C8051F321 to serve as the control core of compact programmable measurement equipment. It can accept external single-ended or differential signals, use an external or internal reference, and synchronize conversion through the external start input. The 25 MIPS throughput supports responsive control and data handling. Engineers should budget Flash space for calibration tables, USB descriptors, and protocol code, and validate analog accuracy across the intended input range.
Disebarkan
USB-to-Serial and Protocol Adapters
A compact USB adapter can use the C8051F321's integrated USB 2.0 controller as the host-side interface while a UART or other serial peripheral connects to the external protocol. This integration avoids a separate USB transceiver and is useful for configuration bridges, legacy equipment adapters, and service tools. The designer must allocate the appropriate 8051 peripherals, USB endpoints, and firmware buffers, and verify whether 16 KB of Flash is sufficient for the protocol stack and boot logic.
Disebarkan
Compact Embedded Control Systems
The combination of a 25 MHz pipelined 8051 core, 21 I/O ports, 16 KB Flash, and integrated analog conversion supports compact embedded controllers that combine digital outputs with limited measurement functions. A typical implementation could monitor switches or sensors, perform a control action, and expose diagnostics through USB. The C8051F321 is most attractive where firmware is modest, USB is required, and an external MCU ecosystem is already established. Validate pin multiplexing and port availability in the exact package variant before schematic release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk C8051F321 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | C8051F320 | C8051F322 | C8051F323 | C8051F324 | C8051F325 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 28-MLP QFN (5 x 5 mm) | 28-MLP QFN (5 x 5 mm) | 28-MLP QFN (5 x 5 mm) | 28-MLP QFN (5 x 5 mm) | 28-MLP QFN (5 x 5 mm) | 28-MLP QFN (5 x 5 mm) |
| CPU Architecture | Pipelined 8051 core | Pipelined 8051 family architecture | Pipelined 8051 family architecture | Pipelined 8051 family architecture | Pipelined 8051 family architecture | Pipelined 8051 family architecture |
| Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| ADC Resolution | 10 bits | 10 bits | 10 bits | 10 bits | 10 bits | 10 bits |
| ADC Maximum Sampling Rate | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps |
| USB 2.0 Function Controller | Yes, with integrated transceiver and on-chip clock recovery | C8051F32x family configuration; verify device-specific USB resources | C8051F32x family configuration; verify device-specific USB resources | C8051F32x family configuration; verify device-specific USB resources | C8051F32x family configuration; verify device-specific USB resources | C8051F32x family configuration; verify device-specific USB resources |
Penyeberangsung Jelas
- Integrated USB transceiver and clock recovery (vsC8051F320)
- High-speed mixed-signal conversion capability (vsC8051F325)
- Deterministic 8-bit control performance (vsC8051F322)
Catatan Desain
Route the USB D+ and D- pair as a controlled-impedance differential pair on the C8051F321 board, keeping the pair short, continuous, and away from switching nodes and analog inputs. Follow the manufacturer's transceiver and layout guidance in the C8051F320/C8051F321 data sheet for trace geometry, grounding, and component placement. Because the supplied verified data does not include a complete pinout, verify USB pin locations and the exposed-pad connection against the exact C8051F321-GM package drawing before releasing copper.
Decouple each VDD supply domain with the capacitance and placement specified by the manufacturer data sheet, and provide a stable reference for both the MCU and the 10-bit ADC. The C8051F321 operates from 2.7 V to 3.6 V, so analog input excursion, USB transceiver supply behavior, and digital output levels must be evaluated against that range. The ADC reference can be external, internal, or VDD; choose it according to measurement accuracy and noise requirements rather than defaulting blindly.
Do not assume that any same-family C8051F32x device is an automatic MCU replacement. Even when the package and core are similar, Flash size, USB endpoints, UART resources, port multiplexing, analog channels, and firmware configuration can differ. Build a migration matrix against the C8051F320/C8051F321 data sheet, recompile with the correct device definition, and verify boot, USB enumeration, analog calibration, and all peripheral pin assignments before substituting a part.
Maklumat Kesediaan
The verified C8051F321 specification listing identifies the device as RoHS compliant. REACH, lead-free, halogen-free, and conflict-minerals declarations were not included in the supplied verified data and are therefore left unknown. AEC-Q100 qualification is not applicable to this general-purpose microcontroller based on the supplied information.
