CD4017BCM - 10-Bit Decade Counter | onsemi | Logic IC
MPN: CD4017BCM ✓ AktifCD4017BCM Ringkasan
A decade counter is a logic IC that divides an incoming clock frequency by ten and converts the count into ten mutually decoded states. The CD4017BCM belongs to the broader hierarchy of CMOS counter logic, alongside binary counters and programmable counters. Its ten decoded outputs reduce the external decoding circuitry normally required in sequential lighting, relay-control, and industrial timing systems.
Key operating features include positive-edge clock triggering, ten decoded outputs, and a five-bit counter architecture. The manufacturer description identifies the device as a one-element, 10-bit counter supporting positive and negative logic conventions. Reported propagation-delay figures include 1000 ns, 400 ns, and 320 ns, allowing clock-rate planning to account for the counter's response time. Its 16-pin SOIC package supports compact surface-mount assembly while providing separate access to the decade outputs.
The CD4017BCM's decoded architecture is particularly useful when a design requires ten discrete sequential states rather than a binary count. A resistor network or diode steering arrangement can connect the decoded outputs to a common load, while the carry output can trigger an additional divider stage. Because the device is a CMOS counter, input transitions and unused inputs still require appropriate handling to prevent unintended current flow or indeterminate states.
Typical applications include ten-step relay sequencing, LED chasers, stepper-motor position stepping, sound-generation patterns, frequency division, and industrial control panels. The device is especially useful when a microcontroller is unavailable or when a simple hardware sequence is more reliable than software timing. In such systems, the clock source determines the repetition rate and the output stages determine which load is active.
Designers should account for supply decoupling, clock rise and fall times, reset timing, and propagation delay in the maximum operating frequency calculation. Unused CMOS inputs must be tied to a defined logic level, normally ground or the active supply rail. A stable reset pulse should be applied during power-up if deterministic starting state is required. The 15 V maximum supply must never be exceeded.
This product page combines device identification, lifecycle-oriented sourcing information, drop-in cross-reference analysis, pin-package context, and practical implementation guidance for engineers evaluating the CD4017BCM in new and existing CMOS logic designs.
Pilihan pengganti yang segera untuk CD4017BCM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CD4017BCM (sama faktor bentuk dan kaki) — berbeza dalam Logic Family.
CD4017BM
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4017BM96
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4017BCM Penilaian maksimum & Ciri-ciri Elektrik
| Counter Type | Decade counter/divider |
| Logic Family | CD4000 CMOS |
| Number of Elements | 1 element |
| Counter Length | 10 bit |
| Number of Decoded Outputs | 10 outputs |
| Number of Output Lines | 10 lines |
| Logic Type | Positive, negative |
| Number of Input Lines | 1 line |
| Tegangan Pemberi Arus Operasi | 3.3 V, 5 V, 9 V, 12 V |
| Maximum Supply Voltage | 15 V |
| Propagation Delay | 1000 ns, 400 ns, 320 ns |
| Minimum Operating Temperature | -55 °C |
| Maximum Operating Temperature | +125 °C |
| Kemasan | 16-pin SOIC |
| Gaya Pemasangan | SMD/SMT |
| Supplier Package Designator | 16-SOIC |
Panduan Konfigurasi Pin CD4017BCM 16-soic
Konfigurasi pin untuk CD4017BCM (16-soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CD4017BCM.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CD4017BCM patut untuk 6 aplikasis: Ten-Step LED Chaser, Relay Sequence Controller, Stepper-Motor Position Sequencer, Frequency Divider and Timer, Display and Channel Multiplexing, Sound and Tone-Pattern Generator.
Ten-Step LED Chaser
The CD4017BCM is well suited to a ten-step LED chaser because its ten decoded outputs advance sequentially after each clock pulse. The onsemi device description confirms a 10-bit decade counter with ten decoded outputs, allowing the circuit to use simple resistive LED drive rather than binary-to-decimal decoding logic. A clock oscillator sets the repetition rate, while the active-high or active-low output conventions must be matched to the LED and transistor arrangement. Keep current-limiting resistors close to the LEDs and confirm that the selected output does not exceed the device's output-current limits. If unused decoded stages are connected, leave them unconnected rather than allowing them to float.
Disebarkan
Relay Sequence Controller
The CD4017BCM can control a sequence of relays, indicator lamps, or solenoids by selecting one decoded output per clock period. Its ten decoded states provide a compact way to implement cyclic equipment sequencing without a microcontroller. Each output should drive a transistor or MOSFET stage rather than a high-current load directly, and flyback protection is required for inductive coils. The clock frequency should be slow enough to provide the required mechanical settling time, while the reset input establishes a known starting state during power-up. This makes the counter useful in panel-test fixtures, timed dispensers, and repetitive industrial actuation sequences.
Disebarkan
Stepper-Motor Position Sequencer
The CD4017BCM can generate the ordered state transitions needed by a stepper-motor controller. Each clock pulse advances the decoded-output sequence, and a reset returns the counter to its first state. The CD4017BCM's one clock input and ten decoded outputs simplify hardware sequencing when a microcontroller is not desirable. However, the logic outputs must not drive motor windings directly; use transistor or MOSFET drivers, flyback diodes, and appropriate current limiting. The maximum clock rate must remain within the timing capability of the counter at the selected supply voltage and must also satisfy the motor driver's requirements.
Disebarkan
Frequency Divider and Timer
The CD4017BCM can divide an input clock into a lower-rate pulse train while also presenting ten decoded count states. This arrangement is useful for periodic sampling, slow sequencing, audible tone generation, and repetitive control events. The manufacturer describes the device as a decade counter/divider, while the listed 1000 ns, 400 ns, and 320 ns propagation-delay figures define the timing envelope that must be considered. Choose the clock frequency with margin for the slowest specified supply voltage and operating temperature. Resetting the counter at a defined point can also create deterministic short cycles or asymmetric timing waveforms.
Disebarkan
Display and Channel Multiplexing
The ten decoded outputs of the CD4017BCM can cycle through display segments, indicator channels, or measurement taps in a fixed sequence. Clocking the counter from a stable timebase reduces repetitive timer logic and makes channel selection easy to inspect during troubleshooting. Because only one decoded output is normally intended to be active at a time, unused channels should be left unloaded or separately disabled. Use CMOS-compatible input levels and provide a defined reset state before enabling downstream circuitry. For multiplexed displays, refresh timing and any display-driver blanking requirements must be coordinated with the counter clock to avoid unintended visual artifacts.
Disebarkan
Sound and Tone-Pattern Generator
The CD4017BCM can generate repeating stepped patterns by advancing decoded outputs at a controlled rate and combining those outputs into an audio or control signal. This is useful for simple alarms, test tones, game effects, and diagnostic indicators. The ten decoded states provide a larger pattern than a basic binary divider without requiring software timing. Set the clock frequency carefully so the counter can meet its propagation-delay requirements at the selected supply voltage, and use appropriate output coupling or transistor drive as required. A power-on reset or defined reset sequence helps prevent the sound pattern from beginning at an unintended state.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD4017BCM — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CD4017BM | CD4017BM96 |
|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | onsemi | Texas Instruments | Texas Instruments |
| Counter Type | Decade counter/divider | Decade counter | Decade counter |
| Logic Family | CD4000 CMOS | CD4000 CMOS | CD4000 CMOS |
| Counter Length | 10 bit | 5 bit | 5 bit |
| Number of Output Lines | 10 lines | 10 lines | 10 lines |
| Maximum Supply Voltage | 15 V | 15 V | 15 V |
| Operating Supply Voltage | 3.3 V, 5 V, 9 V, 12 V | 3.3 V, 5 V, 9 V, 12 V | 3.3 V, 5 V, 9 V, 12 V |
| Minimum Operating Temperature | -55 °C | -55 °C | -55 °C |
| Maximum Operating Temperature | +125 °C | +125 °C | +125 °C |
| Propagation Delay | 1000 ns, 400 ns, 320 ns | 1000 ns, 400 ns, 320 ns | 1000 ns, 400 ns, 320 ns |
| Mounting Style | SMD/SMT | SMD/SMT | SMD/SMT |
Penyeberangsung Jelas
- Established onsemi 16-SOIC implementation with broad CMOS rail support (vsCD4017BM)
- Direct manufacturer-specific sourcing identity (vsCD4017BM96)
- Ten decoded outputs in a compact surface-mount package (vsCD74HC4017)
Catatan Desain
Do not allow any CD4017BCM input to float. The manufacturer product description identifies both positive and negative logic conventions, but unused clock, reset, and control inputs still require a defined potential. Hold reset inactive after a valid startup pulse, and confirm the reset polarity against the manufacturer datasheet. A deterministic reset is particularly important when decoded outputs directly enable relays, motors, or power stages, because an uncontrolled initial count can produce an unintended output state.
The CD4017BCM supports 3.3 V, 5 V, 9 V, and 12 V operation and has a 15 V maximum supply rating. Decouple the supply close to the device with a local ceramic capacitor and provide adequate bulk capacitance at the rail source. The maximum supply rating must not be treated as an operating recommendation. Check output current, input levels, propagation delay, and power dissipation against the selected rail rather than assuming behavior from the 5 V operating point.
Base the maximum clock rate on the listed 1000 ns, 400 ns, and 320 ns propagation-delay figures and the worst-case supply and temperature conditions. Use a clock source with clean edges and observe the manufacturer's pulse-width requirements, especially when driving long PCB traces. Reset timing and decoded-output settling must also be included. If the counter drives a high-capacitance load or long routed output, buffer the signal instead of increasing the clock frequency beyond the verified timing margin.
Place the supply bypass capacitor and any reset-conditioning components near the corresponding CD4017BCM pins. Route the clock away from noisy switching nodes and decoded outputs that fan out to relays or motors, because those switching events can couple into the timing path. Maintain a solid ground reference and avoid routing high-current load returns through the logic ground region. The 16-pin SOIC footprint should be checked against the manufacturer land pattern before PCB release.
Maklumat Kesediaan
The retrieved manufacturer and distributor records do not explicitly state the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current onsemi product documentation or supplier declaration before release.