CS4345-CZZ - 24-Bit 192kHz Stereo DAC | Cirrus Logic
MPN: CS4345-CZZ ✓ AktifCS4345-CZZ Ringkasan
A digital-to-analog converter, or DAC, converts digital audio samples into proportional analog voltages or currents suitable for audio amplification. The CS4345 belongs to the broader stereo DAC category, which includes digital audio interface, interpolation, multi-bit conversion, and analog output filtering. In a consumer audio signal chain, the CS4345 can sit between a digital audio source such as a USB interface, receiver, or digital transport and an analog headphone, line, or power-amplifier stage.
The CS4345-CZZ provides a maximum sample rate of 192 kHz and 24-bit resolution. Its integrated analog filtering simplifies the output network and supports the design of compact stereo audio products. The 10-pin TSSOP package is surface-mountable and suitable for standard PCB assembly processes. The exact digital interface timing, master/slave behavior, output architecture, and recommended application circuit should be confirmed against the manufacturer datasheet before final schematic and layout release.
The CS4345 is useful in USB audio adapters, digital audio receivers, Blu-ray player analog outputs, game-console accessories, active speakers, and other stereo playback systems. Its 192 kHz capability supports high-resolution audio use cases, while the integrated filter reduces the number of external analog components required for a conventional stereo output stage.
Careful attention is required when connecting the digital interface and analog outputs. The power rails, decoupling capacitors, ground reference, and output-load configuration must follow the datasheet recommendations. In particular, the device is not a headphone driver, so a suitable analog output amplifier may be required depending on the intended load and output-voltage range.
This product page consolidates the verified CS4345-CZZ family specifications, package information, sourcing details, application guidance, and pin-compatible alternatives. It is intended to help engineers compare the CS4345-CZZ with related Cirrus Logic converters and plan a compact, low-noise stereo audio output stage.
Pilihan pengganti yang segera untuk CS4345-CZZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CS4345-CZZ (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type.
CS4345-DZZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS4344-CZZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CS4348-CZZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS4345-CZZ Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Stereo digital-to-analog converter (DAC) |
| Pemecahkatan | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Digital Interface | SPI |
| Channel Configuration | Stereo |
| Supported Input Resolution | 16 bit to 24 bit |
| Low-Voltage Supply Range | 3 V to 3.47 V |
| High-Voltage Supply Range | 4.75 V to 5.25 V |
| Kemasan | 10-pin TSSOP |
| Jenis Pemasangan | Surface mount |
| Output Filtering | Integrated analog filtering |
| Gambaran Suhu Operasi | -10 °C to +70 °C |
| Container Option | Tube or tape-and-reel |
Panduan Konfigurasi Pin CS4345-CZZ 10-pin tssop
Konfigurasi pin untuk CS4345-CZZ (10-pin tssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk CS4345-CZZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CS4345-CZZ patut untuk 6 aplikasis: High-Resolution Stereo Audio Output, USB Audio Adapter, Digital Audio Receiver, Active Speaker Interface, Game Console Accessory, Blu-Ray Player Analog Output.
High-Resolution Stereo Audio Output
The CS4345-CZZ fits a high-resolution stereo playback path because it converts 16-bit to 24-bit digital audio at rates up to 192 kHz. Its integrated analog filtering is particularly useful when the design needs a compact output stage without a large discrete reconstruction-filter network. Place the converter between a digital audio transport and an analog line or power-amplifier input. The implementation must still provide clean supply rails, suitable bypass capacitance, and the datasheet-recommended output network to control distortion and loading. The device offers a useful balance of channel count, resolution, sample rate, and integration for premium consumer audio equipment.
Disebarkan
USB Audio Adapter
A USB audio adapter can use the CS4345-CZZ to translate the digital stream from a USB audio controller into an analog stereo output. Its 192 kHz maximum sample rate supports high-resolution playback, while 24-bit resolution preserves low-level digital audio information before conversion. The converter’s integrated analog filtering reduces the external passive-filter count commonly associated with a basic DAC stage. Board designers should prioritize a quiet low-impedance supply, return output ground close to the converter, and follow the manufacturer’s recommended capacitor placement. A line-level amplifier may be added if the application requires a different output voltage or drive level.
Disebarkan
Digital Audio Receiver
The CS4345-CZZ can provide the final analog conversion stage in a digital audio receiver or home-theater accessory. It accepts a digital source, supports sample rates through 192 kHz, and generates a stereo analog output suitable for downstream amplification. Its 10-pin TSSOP package keeps the converter footprint compact, which is useful in slim receiver designs. System integration still requires correct master-clock generation, defined serial-audio timing, and the manufacturer-recommended output network. The analog section should be separated as far as practical from switching regulators and high-current processor circuitry to reduce ground and supply disturbance reaching the converter.
Disebarkan
Active Speaker Interface
An active speaker controller can use the CS4345-CZZ to create a stereo line-level output from a digital audio processor. The 24-bit, 192 kHz conversion capability supports modern high-resolution sources, while the integrated analog filtering simplifies signal conditioning before the power amplifier. The converter is not itself a headphone or speaker driver, so the output must feed an amplifier stage selected for the intended impedance and power. Designers should use short, symmetric analog traces, maintain a stable common ground, and apply the datasheet’s output filtering and load requirements. Proper decoupling at the analog and digital supplies is especially important when the power amplifier operates close to the converter.
Disebarkan
Game Console Accessory
The CS4345-CZZ is suitable for game-console accessories that add a digital stereo audio output to a compact peripheral. Its 10-pin TSSOP package limits board area, and the 192 kHz maximum rate provides compatibility with high-resolution source formats. A practical design uses the converter near the device’s digital audio source and routes the analog output to a line-level amplifier or headset driver. Keep clock and data traces away from switching nodes, keep analog return paths compact, and include local bypass capacitors at the supply pins. The operating temperature range and package variant should also be checked against the accessory’s environmental requirements.
Disebarkan
Blu-Ray Player Analog Output
The CS4345-CZZ can serve as a stereo analog output converter in a Blu-ray or media-player design receiving digital audio from a decoder or receiver. Its 24-bit, 192 kHz capability suits high-resolution movie and music formats, while integrated output filtering reduces the burden of discrete analog reconstruction components. The implementation should follow the manufacturer’s reference application for bypass capacitors, output loading, and digital interface timing. Because the analog output is sensitive to supply and ground disturbance, separate noisy switching-current paths from the converter and use a stable ground reference. An external amplifier may be required for headphone or line-output gain adjustment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CS4345-CZZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CS4345-DZZ | CS4344-CZZ | CS4348-CZZ |
|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 10-pin TSSOP | 10-pin TSSOP | 10-pin TSSOP | 10-pin TSSOP |
| Product Type | Stereo DAC | Stereo DAC | Stereo DAC | Stereo DAC |
Penyeberangsung Jelas
- High-resolution stereo conversion (vsCS4344-CZZ)
- Same-package family upgrade path (vsCS4345-DZZ)
- Integrated analog filtering (vsCS4348-CZZ)
Catatan Desain
Use separate local bypass paths for the analog and digital supply pins, with the capacitors placed close to their corresponding package pins. The CS4345 supports 3 V to 3.47 V and 4.75 V to 5.25 V supply options, but the actual rail selection must follow the manufacturer datasheet. Keep switching-regulator routing and high-current return paths away from the DAC output reference to reduce audible modulation of the stereo output.
Route the SPI clock, serial data, and control signals away from the analog output traces. Keep the digital-audio traces short, provide a continuous ground reference, and place the analog output network close to the DAC pins. Because the CS4345-CZZ uses a compact 10-pin TSSOP, careful via placement and ground-plane management are important for maintaining signal integrity and predictable analog performance.
Do not treat the CS4345-CZZ as a headphone or speaker driver. It produces an analog stereo output that may require an amplifier depending on the intended load and signal level. Also verify the exact digital format, master-clock requirements, sample-rate support, and output topology from the manufacturer datasheet before finalizing a replacement or PCB design.
Maklumat Kesediaan
The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose audio DAC.