ISL6216CA-T - 2-Phase Buck PWM Controller | Renesas
MPN: ISL6216CA-T ✓ AktifISL6216CA-T Ringkasan
A voltage-mode PWM controller belongs to the DC-DC converter control hierarchy: it accepts feedback information from the power stage and generates control signals for external high-current switching devices. A 2-phase buck architecture divides output-current responsibility across two switching paths. Compared with a single-phase converter, this arrangement can improve transient response and reduce the amount of current handled by each switching element when the board and component values are designed appropriately.
The ISL6216CA-T is identified specifically as a 28-pin QSOP W device. The QSOP W package provides a compact surface-mount solution for notebook-computer and mobile-processing power systems. The -T ordering suffix denotes the exact catalogued ISL6216CA-T configuration, while the manufacturer documentation title identifies the underlying circuit as a precise 2-phase buck PWM controller for Intel Mobile Voltage Positioning.
The device operates as a dedicated PWM controller rather than as a complete switching regulator. Its implementation therefore depends on external MOSFETs, inductors, capacitors, current-sense elements, and feedback components. The controller’s phase count and voltage-mode architecture are the principal verified technical characteristics; detailed operating limits, timing values, electrical maxima, compensation method, and recommended component selections must be taken from the manufacturer datasheet before a new design is released.
Typical uses include notebook-computer motherboard voltage regulation, mobile processor core-rail conversion, compact workstation power systems, and other multi-phase point-of-load architectures. The controller is most appropriate when the system designer already has experience with external power-stage layout, feedback compensation, current-sense calibration, and the electrical requirements of Intel Mobile Voltage Positioning.
Design work should begin with the manufacturer’s application information and reference power-stage schematic. MOSFET selection, gate-drive timing, inductor sizing, compensation, and layout must satisfy the controller’s published limits. Because the controller drives external high-current switching paths, layout error can affect efficiency, transient behavior, and thermal performance even when the selected components meet their individual ratings.
This page combines the verified controller identity, package information, application focus, lifecycle information, sourcing structure, and engineering guidance into one practical product reference. It also records where electrical details require confirmation in the official Intersil datasheet, helping engineers distinguish documented facts from design parameters that must be selected during implementation.
Pilihan pengganti yang segera untuk ISL6216CA-T — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifISL6216CA-T Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Voltage-mode PWM controller |
| Converter Architecture | 2-phase buck controller |
| Target Application | Intel Mobile Voltage Positioning |
| Package Type | QSOP W |
| Package Pin Count | 28 pins |
| Jenis Pemasangan | Surface mount |
| Product Status | Active |
Panduan Konfigurasi Pin ISL6216CA-T 28 pins
Konfigurasi pin untuk ISL6216CA-T (28 pins pakai). Peranti kuasa ini mempunyai terminal kawat, buang, dan sumber. Untuk pakai non-polarized, rujuk dokumen pengeluar untuk orientasi pin 1 tepat dan perincian kebentuk.
Tiada data garisan pin yang diperoleh untuk ISL6216CA-T.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ISL6216CA-T patut untuk 6 aplikasis: Notebook Mobile Processor Rail, Mobile Computing Voltage Positioning, Multi-Phase Point-of-Load Conversion, Compact Workstation Processor Supply, High-Current Embedded Computing Rail, Precision Processor Core Supply.
Notebook Mobile Processor Rail
The ISL6216CA-T fits a notebook-computer processor rail because Intersil identifies it as a precise 2-phase buck PWM controller for Intel Mobile Voltage Positioning. The controller manages the external high-current switching stage and divides the conversion workload across two phases. This architecture is useful where processor transients require more than a basic single-phase response. The implementation still depends on matching the controller’s documented operating limits, compensation approach, and voltage-positioning behavior to the selected processor power specification.
Disebarkan
Mobile Computing Voltage Positioning
The ISL6216CA-T was designed specifically around Intel Mobile Voltage Positioning applications. Positioned in a multi-phase buck topology, the controller coordinates the switching elements and regulates the processor-facing voltage rail. This makes the device appropriate for compact mobile-computing boards where rapid load transitions and efficient point-of-load conversion are central design concerns. Final selection requires checking the platform’s required voltage range, load current, enable behavior, compensation, and layout constraints against the manufacturer documentation.
Disebarkan
Multi-Phase Point-of-Load Conversion
The ISL6216CA-T can serve as the control element in a compact point-of-load converter built around two external switching phases. Its voltage-mode PWM architecture allows the feedback network and compensation network to regulate a local rail generated from a higher-voltage supply. Two phases can reduce the conduction burden on each switching device and improve transient behavior when the power stage is properly designed. Engineers must still validate inductor ripple, current-limit behavior, loop stability, and thermal performance in the final layout.
Disebarkan
Compact Workstation Processor Supply
The ISL6216CA-T is applicable to a compact processor power system that uses a controlled multi-phase buck rail. The 28-pin QSOP W package supports dense board layouts, while the 2-phase architecture provides a defined organization for high-current switching. Its original Intel Mobile Voltage Positioning focus means workstation use should begin with a careful comparison of electrical limits and platform-specific control functions. Confirm startup, current-sense range, gate-drive compatibility, and compensation requirements before adapting an existing reference design.
Disebarkan
High-Current Embedded Computing Rail
The ISL6216CA-T can support a multi-phase embedded-computing rail when the required operating conditions are matched to the Intersil controller documentation. Its 2-phase voltage-mode topology is intended to control external MOSFETs and magnetics rather than integrate the switching devices itself. That division allows the power stage to be scaled for a specific processor or system-on-chip. The design should account for start-up sequencing, load-transient response, current sharing, feedback routing, and the controller’s electrical limits before production use.
Disebarkan
Precision Processor Core Supply
The ISL6216CA-T is well suited to evaluating a precision core-voltage supply based on its documented voltage-mode, 2-phase buck architecture. The controller compares the regulated output through the feedback system and drives two external power paths to maintain the requested processor rail. Precise implementation depends on selecting the correct compensation values and avoiding layout-induced errors in the high-current and sensing paths. Verify the processor’s dynamic-voltage requirements and the controller’s complete timing and electrical limits before releasing the circuit.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ISL6216CA-T — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 28-pin QSOP W |
| Brand | Renesas Electronics |
| Device Type | Voltage-mode PWM controller |
| Converter Phases | 2 phases |
| Target Application | Intel Mobile Voltage Positioning |
| Lifecycle Status | Active |
Penyeberangsung Jelas
- Purpose-built 2-phase mobile voltage-positioning controller (vsISL6216CA)
- Established mobile-platform application focus (vsGeneric single-phase buck controllers)
- Compact 28-pin QSOP W integration (vsControllers using larger leaded packages)
Catatan Desain
Use the manufacturer’s recommended layout as the basis for the 28-pin QSOP W controller and external power stage. Keep the high-current VIN and PGND paths compact, place the switching devices close to the input and output capacitors, and minimize the loop area of each switching cell. Route gate-drive, current-sense, and feedback traces away from switching nodes to reduce coupled noise, false current-limit trips, and unstable feedback behavior.
Do not treat the ISL6216CA-T as a self-contained regulator. The controller requires an external two-phase buck power stage with MOSFETs, inductors, current-sense elements, capacitors, and a compensation network. Verify voltage limits, switching timing, phase-current sensing, startup behavior, and feedback polarity from the Intersil datasheet before selecting components or releasing a schematic.
The controller IC is not the only component that dissipates power in a two-phase buck converter. Estimated: MOSFET conduction and switching loss, inductor resistance, capacitor ripple current, and controller bias loss combine to determine system efficiency. The actual junction and board temperatures must be checked at maximum load, minimum input voltage, highest switching frequency, and the highest ambient operating condition using the relevant manufacturer thermal data.
Current sharing depends on the selected inductors, current-sense implementation, layout symmetry, and compensation rather than on the 2-phase label alone. Compare each phase’s peak and average current against the controller’s sensing and current-limit ranges. Also check startup current, output-capacitor inrush, and the voltage-positioning profile required by the target processor before finalizing the power components.
Maklumat Kesediaan
The available product information identifies the lifecycle status and device function but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements from the current manufacturer product documentation or declaration.
