Renesas Electronics

ISL84541IU - Dual SPST 12V 60Ω Analog Switch | Renesas

MPN: ISL84541IU ✓ Aktif
+2.7 V to +12 V Vdss 10 nA Id 60 Ω Rds(on) 8-MSOP Package
MOQ: 1 |

ISL84541IU Ringkasan

The Renesas Electronics ISL84541IU is a dual SPST analog switch designed for low-voltage, single-supply operation. The device provides two independently controlled analog switches, a 60 Ω on-resistance specification, and an operating supply range of +2.7 V to +12 V in an 8-MSOP package. It is suited to battery-powered and portable equipment where signal routing must remain compatible with low supply voltages.

An analog switch is a semiconductor device that connects or disconnects analog signal paths under digital control. The ISL84541 family belongs to the analog switch and multiplexer hierarchy, which sits within interface ICs and broader signal-conditioning systems. Unlike a mechanical relay, an analog switch changes electrical connections much faster and can route low-level signals without physically moving conductive contacts. The ISL84541IU combines this switching function with low-power operation and supply flexibility.

Key family features include on-resistance matching below 1 Ω between channels, maximum charge injection of 5 pC, power consumption below 5 µW, and maximum leakage current of 10 nA at 85°C. The devices are fully characterized at 3.3 V and 5 V supplies, which makes their behavior predictable in common portable and embedded rails. A Pb-free option is also available within the ISL84541 family.

The dual-SPST configuration gives each switch one normally closed and one normally closed terminal pair in its SPDT implementation, allowing a signal to be routed to or away from the common terminal. The low charge injection helps limit transient disturbances when the control state changes, while matched on-resistance helps reduce gain or timing differences between channels. These characteristics are important when the same source feeds multiple downstream paths.

Typical uses include battery-powered test equipment, portable measurement systems, audio and communication-signal routing, automated test equipment, and low-voltage data-acquisition equipment. The +2.7 V minimum supply supports systems powered from two alkaline cells, while the +12 V maximum provides additional range for industrial and instrumentation designs. The 8-MSOP package also supports compact board layouts when adequate assembly and inspection controls are used.

A primary design consideration is ensuring that the control voltage and analog signal levels remain within the device's operating limits. Place bypass capacitance close to the supply pin, keep switched traces short, and route sensitive inputs away from switching-control and clock traces. Also verify the switch configuration in the pin-description table before assigning PCB nets, because the family includes several SPST and SPDT arrangements.

This product page combines the exact ISL84541IU catalog attributes with family-level technical information, drop-in compatibility findings, and practical guidance for low-voltage analog routing. It is intended to help engineers compare the device against documented equivalents, plan PCB changes, and select an appropriate replacement without conflating packaging suffixes with electrically distinct alternatives.

Pilihan pengganti yang segera untuk ISL84541IU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MAX4541

✅ Masuk Drop-In
📦 8-MSOP
Documented ISL84541 drop-in family replacement; family documentation lists on-resistance up to 30 Ω versus the target's 60 Ω listing, while the exact orderable package suffix must be confirmed

📋 Alternatif rujukan (tidak dalam katalog)

ISL84541IU Penilaian maksimum & Ciri-ciri Elektrik

Number of Switches 2 circuits
Switch Configuration Dual SPST/SPDT family configuration
Catalogued On-Resistance 60 Ω
Single-Supply Voltage Range +2.7 V to +12 V
Fully Specified Supply 3.3 V and 5 V
On-Resistance Matching Between Channels <1 Ω
Maximum Charge Injection 5 pC
Power Consumption <5 µW
Maximum Leakage Current at 85°C 10 nA
Kemasan 8-MSOP
Jenis Pemasangan Surface mount
Pb-Free Availability Available as an option in the ISL84541 family
Documented Pin Compatibility Compatible with MAX323 through MAX325 family pin functions
Product Type Precision dual analog switch
Operating Supply Class Single supply
Status Lingkungan Hidup Active

Panduan Konfigurasi Pin ISL84541IU 8-msop

Konfigurasi pin untuk ISL84541IU (8-msop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 8-msop untuk ISL84541IU

Tiada data garisan pin yang diperoleh untuk ISL84541IU.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ISL84541IU patut untuk 6 aplikasis: Battery-Powered Portable Instruments, Automated Test Equipment Signal Routing, Low-Level Data Acquisition, Audio Signal Path Switching, Industrial Control Signal Isolation, Communication and RF Test Signal Paths.

📱

Battery-Powered Portable Instruments

The ISL84541IU fits battery-powered portable instruments because it operates from a single +2.7 V to +12 V supply and its family power consumption is below 5 µW. It can route a sensor or reference signal to one of two acquisition paths while the enclosure is limited to a compact 8-MSOP footprint. Operation is fully characterized at 3.3 V and 5 V, allowing a design to target either a three-cell or regulated portable rail. Keep the analog traces short and place supply bypass capacitance close to the device to preserve low-noise behavior during control-state transitions.

🏭

Automated Test Equipment Signal Routing

The ISL84541IU is useful in automated test equipment when a low-level signal must be connected or isolated between two paths. Its two switch circuits provide independent routing, while family on-resistance matching below 1 Ω helps reduce channel-to-channel variation. The maximum 5 pC charge-injection specification is particularly relevant when the instrument samples immediately after a control transition. Designers should allow settling time before acquisition, validate the RON curves at the intended signal amplitude, and use a quiet reference and ground layout to prevent control activity from coupling into the measurement path.

📟

Low-Level Data Acquisition

The ISL84541IU can route low-level sensor signals in compact data-acquisition equipment that operates from a +2.7 V to +12 V supply. Leakage current is specified at no more than 10 nA at 85°C, allowing the switch to be included in the input-impedance and error calculation for high-impedance sources. On-resistance matching below 1 Ω between channels helps maintain comparable signal paths. Position the device near the protected input, keep leakage-sensitive traces short, and account for injected charge when a sampled signal changes amplitude or source immediately after switching.

🎧

Audio Signal Path Switching

The ISL84541IU is suitable for low-voltage audio routing in portable equipment, communication terminals, and compact test systems. Its single-supply operation from +2.7 V to +12 V supports operation near common portable and mixed-signal rails, while the family specification of less than 5 µW power consumption helps limit overhead in battery-operated products. The 60 Ω catalogued on-resistance should be checked against the source impedance and acceptable insertion loss for the actual signal. Keep the switch close to the audio trace, maintain continuous ground references, and verify that control transitions do not produce audible transients.

⚙️

Industrial Control Signal Isolation

The ISL84541IU can isolate or redirect a low-level control or diagnostic signal in compact industrial equipment operating from a +2.7 V to +12 V rail. The dual switch arrangement allows two paths to be selected without using a mechanical relay, while operation at 3.3 V and 5 V is fully specified for common embedded control systems. Leakage below the family limit of 10 nA at 85°C supports designs using resistive sensing networks. Confirm the logic thresholds, maximum analog voltage, and switch state in the exact pin-description table before assigning industrial field-routing nets.

🌐

Communication and RF Test Signal Paths

The ISL84541IU can serve as a compact routing element in low-frequency communication test equipment, provided the selected signal amplitude remains within the device's operating limits. Its low power consumption and single-supply range suit portable and bench instruments, and matched channel resistance below 1 Ω can reduce amplitude imbalance between related paths. The 5 pC maximum charge injection should be included in transient-error analysis near the switching instant. Use short, controlled-impedance traces where applicable, maintain grounding beneath the signal path, and validate channel isolation and insertion loss in the final fixture.

Ringkasan Produk Disebarkan

MAX323 Pin-compatible low-voltage switch family Dipergunakan di: Battery-Powered Portable Instruments, Low-Level Data Acquisition, Industrial Control Signal Isolation MAX325 Pin-compatible interface-switch family Dipergunakan di: Automated Test Equipment Signal Routing MAX4541 Documented drop-in family replacement Dipergunakan di: Audio Signal Path Switching, Communication and RF Test Signal Paths
What is the ISL84541IU?
The ISL84541IU is a Renesas Electronics dual analog switch in an 8-MSOP package, with two switch circuits and a listed on-resistance of 60 Ω. It operates from a single supply of +2.7 V to +12 V. The ISL84541 family is intended for low-voltage signal-routing applications, including battery-powered equipment, and is fully specified at 3.3 V and 5 V according to the manufacturer datasheet.
What are the key specifications of ISL84541IU that engineers should know?
The ISL84541IU combines a +2.7 V to +12 V single-supply range, 60 Ω catalogued on-resistance, two switch circuits, and an 8-MSOP package. Its family also specifies on-resistance matching below 1 Ω, charge injection up to 5 pC, power consumption below 5 µW, and leakage current up to 10 nA at 85°C. These parameters position it as a precision, low-power analog-routing device rather than a power switch.
What is the operating voltage of ISL84541IU?
The ISL84541IU operates from a single supply of +2.7 V to +12 V. The manufacturer also states that the ISL84541 family is fully specified at 3.3 V and 5 V, which covers common portable, embedded, and instrumentation rails. Confirm that the individual control and analog signal voltages meet the limits in the pin-description table for the selected switch configuration.
Where can I download the ISL84541IU datasheet PDF?
The ISL84541IU datasheet PDF is available at https://pdf.digi-electronics.com/pdf/1268/ISL84541IU-datasheet.pdf. Use the pin-description table and electrical-characteristics section when assigning signals and checking limits for the exact ISL84541IU ordering code. The manufacturer documentation identifies the device as a low-voltage, single-supply dual analog switch.
Where can I find the ISL84541IU pinout and switch configuration?
The ISL84541IU pinout should be taken from the pin-description table in the manufacturer datasheet because the ISL84541 family includes multiple SPST and SPDT arrangements. The exact ISL84541IU ordering code is supplied in an 8-MSOP package. Use the package drawing and pin table together when assigning common, normally closed, and normally open PCB nets to prevent routing errors.
Is the ISL84541IU suitable for battery-powered equipment?
Yes, the ISL84541IU is suitable for battery-powered equipment because its single-supply operating range begins at +2.7 V and family power consumption is specified below 5 µW. It is also fully characterized at 3.3 V and 5 V. The low-voltage operation supports two-cell alkaline systems and similar portable rails, subject to the exact control and signal-voltage limits in the datasheet.
Can MAX4541 replace the ISL84541IU?
The MAX4541 is the documented drop-in family equivalent identified for the ISL84541, but the exact package suffix and electrical configuration must match before substitution. The documented relationship also identifies MAX323 through MAX325 as pin-compatible families. Confirm the manufacturer pin table, 8-MSOP footprint, supply range, and switch state before approving a replacement for production hardware.
What can replace the ISL84541IU on the same PCB?
A production replacement should preserve the 8-MSOP footprint, pin functions, supply range, and SPST/SPDT behavior. The family documentation identifies MAX4541 through MAX4544 as drop-in replacements and MAX323 through MAX325 as pin-compatible families, but those ranges include multiple switch and package configurations. Use the exact manufacturer ordering code only after checking its pin description against the installed ISL84541IU.
When should I choose the ISL84541IU instead of a MAX4541 alternative?
Choose the ISL84541IU when its documented 8-MSOP ordering code, dual-switch configuration, and low-voltage operating range already match the PCB and signal requirements. Select a MAX4541-series alternative only when its exact suffix provides the same footprint and pin functions. The ISL84541IU remains attractive where a +2.7 V minimum supply, low power consumption, and documented MAX323-through-MAX325 compatibility are important.
Is ISL84541IU the same as MAX4541?
No, ISL84541IU and MAX4541 are different manufacturer part numbers, although the ISL84541 documentation identifies MAX4541 as a drop-in family replacement. The target ISL84541IU is an 8-MSOP device with a listed 60 Ω on-resistance. Exact equivalence still depends on the MAX4541 suffix, package dimensions, pin functions, and switch configuration.
What is the best Renesas equivalent for the ISL84541IU?
The ISL84541IU is itself the Renesas ordering code for this dual analog-switch configuration, so an exact alternative may be unnecessary when its package and pins fit the design. Related ISL84541-family members provide other SPST/SPDT combinations but are not automatically interchangeable. For an exact footprint replacement, compare the target pinout against the specific alternative rather than relying only on the family number.
How much on-resistance does the ISL84541IU have?
The ISL84541IU is catalogued with 60 Ω on-resistance. Related family documentation also highlights on-resistance matching below 1 Ω between channels, allowing engineers to compare two paths more accurately. Use the manufacturer's RON-versus-voltage and RON-versus-current curves for the operating condition that matters because the final resistance can vary with supply and analog signal level.
How much charge injection and leakage affect ISL84541IU designs?
The ISL84541 family specifies maximum charge injection of 5 pC and maximum leakage current of 10 nA at 85°C. Charge injection creates a brief transient whenever a control input changes state, which can matter in precision acquisition circuits. Leakage contributes to the switched-node error budget, so use both limits when sizing capacitors and calculating total measurement uncertainty.
Where to buy ISL84541IU online and what is its price?
The ISL84541IU can be requested through the Request a Quote form on this page, which is the appropriate route for current pricing, stock confirmation, lead time, and minimum order quantity. Commercial terms change with quantity and market conditions, so a static price would not represent the current offer. The form allows the exact MPN and required packaging quantity to be reviewed before an order is placed.
What is the lead time and stock status for ISL84541IU?
Use the Request a Quote form on this page to obtain the current ISL84541IU stock position, lead time, and minimum order quantity. Those commercial terms are order-specific and are not fixed by the manufacturer datasheet. Include the required quantity, date code preference, and destination so the manufacturer or its authorized channel can confirm an accurate delivery commitment.
Does the ISL84541IU comply with RoHS and REACH?
The manufacturer family documentation states that a Pb-free option is available for the ISL84541, but the exact ISL84541IU orderable compliance status should be confirmed through the Request a Quote form on this page. RoHS, REACH, halogen-free, and conflict-minerals status can vary with specific ordering codes and revisions. Do not assume certification solely from the family-level Pb-free statement.

Data referensi kejuruteraan untuk ISL84541IU — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ISL84541IU when the design needs a dual analog switch, a single supply from +2.7 V to +12 V, and an 8-MSOP footprint. It is particularly useful in portable and low-power measurement systems where the family specifies power consumption below 5 µW, charge injection up to 5 pC, and on-resistance matching below 1 Ω. The MAX4541 is the documented drop-in family replacement and may be considered when its exact suffix, pin functions, and package match the installed device. Do not substitute MAX4542, MAX4543, or MAX4544 without checking their individual switch configurations. Likewise, the MAX323-through-MAX325 family provides documented pin-compatible options, but its members are not all interchangeable. Confirm package dimensions, pin assignment, control logic, signal-voltage limits, and lifecycle requirements before approving any replacement.

Perbandingan dengan Gantian

Parametr Produk Ini MAX4541
Package 8-MSOP 8-MSOP
Brand Renesas Electronics Analog Devices
Number of Switch Circuits 2 2
Catalogued On-Resistance 60 Ω Up to 30 Ω in family documentation
On-Resistance Matching <1 Ω <1 Ω in family documentation
Maximum Charge Injection 5 pC 5 pC in family documentation
Power Consumption <5 µW <5 µW in family documentation
Maximum Leakage Current at 85°C 10 nA 10 nA in family documentation
Fully Specified Supply 3.3 V and 5 V 3.3 V and 5 V in family documentation
Documented Compatibility MAX323 through MAX325 pin-compatible families Documented ISL84541 drop-in family replacement

Penyeberangsung Jelas

  • Documented cross-family pin compatibility (vsMAX323 through MAX325)
  • Low-voltage operation aligned with portable rails (vsMAX4541)
  • Low static power burden (vsMAX4541)
  • Matched channel resistance (vsMAX4541)

Catatan Desain

Do not choose a replacement from the family number alone. The ISL84541 documentation identifies MAX4541 through MAX4544 as drop-in replacements and MAX323 through MAX325 as pin-compatible families, but each range can contain different SPST/SPDT functions and package suffixes. Compare the exact orderable MPN, 8-MSOP land pattern, control thresholds, common and throw terminals, and maximum signal voltage before modifying a PCB.

Place the ISL84541IU close to the signal source and destination so that switched-node capacitance and trace length remain small. Route the two analog paths similarly to minimize channel-to-channel delay and resistance differences. Keep the control traces away from sensitive analog inputs, maintain a continuous ground reference under the routing area, and use a small loop area around each control connection to reduce transient coupling during state changes.

Use the specified single-supply operating range of +2.7 V to +12 V and add local supply bypass capacitance close to the power pin. The family specifies consumption below 5 µW, but total system power also depends on the switched signal condition and control state. Confirm that every logic-control and analog-signal level remains within the limits shown in the manufacturer pin-description table, especially when the supply approaches +2.7 V.

Include the maximum 5 pC charge injection in the settling-time budget after each switch transition. For a switched input capacitance, the resulting voltage step is approximately Q divided by C; this is an estimated design relationship based on the documented 5 pC maximum and should be checked against the actual acquisition timing. Add an intentional guard interval before sampling when the source impedance is high.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The ISL84541 family documentation states that a Pb-free option is available. Exact orderable compliance for ISL84541IU, including RoHS, REACH, halogen-free, and conflict-minerals status, should be confirmed before production release.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ISL84541IU datasheet ISL84541IU pinout ISL84541IU datasheet pdf ISL84541IU equivalent ISL84541IU replacement ISL84541IU cross reference ISL84541IU vs MAX4541 ISL84541IU footprint Renesas ISL84541IU ISL84541IU 8-MSOP ISL84541IU 60 ohm analog switch ISL84541IU price ISL84541IU stock ISL84541IU application circuit

Komponen dan Tanda berkaitan

Renesas Electronics Intersil ISL84541IU ISL84541 MAX4541 MAX4542 MAX4543 MAX4544 MAX323 MAX324 MAX325 Analog Devices dual SPST analog switch SPDT analog switch analog switch analog multiplexer interface IC semiconductor 8-MSOP surface-mount package on-resistance charge injection leakage current power consumption single-supply operation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ