LM61440AANRJRR - 4A Low-EMI Buck Converter | Texas Instruments
MPN: LM61440AANRJRR ✓ AktifLM61440AANRJRR Ringkasan
Pilihan pengganti yang segera untuk LM61440AANRJRR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LM61440AANRJRR (sama faktor bentuk dan kaki) — berbeza dalam Dropout Behavior, Input Voltage Range, Output Voltage, Package, Topology.
LM61440AANRJRR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM61440AASQRJRRQ1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LM61440AANRJRR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LM61440AASRJRR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LM61440AANRJ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LM61440AANRJRR Penilaian maksimum & Ciri-ciri Elektrik
| Gambaran Tegangan Masukan | 3 V to 36 V |
| Transient Input Tolerance | 42 V |
| Output Current | 4 A |
| Tegangan Output | 1 V minimum, adjustable |
| Frekuensi Pertukaran | 2.2 MHz |
| Tetstruktur | Synchronous step-down converter |
| Integrated Power Devices | Integrated high-side and low-side MOSFETs |
| Dropout Behavior | Soft recovery from dropout |
| Konfigurasi Output | Positive, adjustable, single output |
| EMI | Low-EMI design |
| Suhu Hubungan Operasi | -40 °C to +150 °C |
| Kemasan | 14-pin PowerVQFN |
| Jenis Pemasangan | Surface mount |
| Application | Low-EMI low-noise power conversion |
| Exposed Thermal Pad | Present in PowerVQFN package |
Panduan Konfigurasi Pin LM61440AANRJRR 14-pin powervqfn
Konfigurasi pin untuk LM61440AANRJRR (14-pin powervqfn pakai). Peranti kuasa ini mempunyai terminal kawat, buang, dan sumber. Untuk pakai non-polarized, rujuk dokumen pengeluar untuk orientasi pin 1 tepat dan perincian kebentuk.
Tiada data garisan pin yang diperoleh untuk LM61440AANRJRR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LM61440AANRJRR patut untuk 8 aplikasis: Industrial 24 V Power Rail, Communications Equipment Power Supply, Audio and Analog Signal-Chain Supply, Embedded Computing and Processor Rail, Test and Measurement Front End, Battery-Powered and Portable Systems, LED and Display Backlight Systems, Automotive and Rugged Embedded Systems.
Industrial 24 V Power Rail
The LM61440AANRJRR is suitable for regulating a 24 V industrial input into a lower voltage rail for sensors, controllers, and communications equipment. Its 3 V to 36 V operating range covers the nominal bus, while the stated 42 V transient tolerance provides useful surge margin. With integrated high-side and low-side MOSFETs, the converter simplifies the power stage. The 4 A rating can support moderate loads, but the inductor, output capacitors, thermal design, and input protection must be selected for the actual transient profile.
Disebarkan
Communications Equipment Power Supply
For communications equipment, the LM61440AANRJRR provides a compact synchronous step-down stage with adjustable output down to 1 V and up to 4 A of nominal output current. The integrated MOSFETs reduce external component count, while the 2.2 MHz switching frequency supports compact magnetics and capacitors. Its low-EMI architecture is useful when converter switching could interfere with nearby signal processing. Proper input filtering, ground-plane planning, and output-decoupling layout remain necessary for system-level EMI performance.
Disebarkan
Audio and Analog Signal-Chain Supply
The LM61440AANRJRR can generate a local low-voltage rail for audio, ADC, DAC, or other analog signal-chain blocks. Its low-EMI synchronous architecture is intended to reduce switching-related interference, and the adjustable output allows the rail to be matched to the downstream device. Because DC-DC converters can still produce conducted and radiated emissions, place the input and output capacitors close to their pins and keep the high-current switching loop small. The final noise performance depends on layout, filtering, and the selected passives.
Disebarkan
Embedded Computing and Processor Rail
The LM61440AANRJRR is suitable for intermediate processor, FPGA, or embedded-computing rails where the input bus is above the required core voltage. Its 3 V to 36 V input range supports common 5 V, 12 V, and 24 V distribution systems, while the adjustable output and 4 A capability provide flexibility for multiple loads. Designers should calculate voltage-drop and power loss across the inductor and PCB copper, and verify transient response against the processor load profile. The synchronous topology helps improve efficiency compared with a basic diode rectifier when operating conditions are suitable.
Disebarkan
Test and Measurement Front End
The LM61440AANRJRR is appropriate for local rails in test and measurement equipment where compact conversion and controlled EMI are important. The 2.2 MHz switching frequency enables small passive components, and the integrated MOSFETs simplify the converter implementation. A low-noise supply helps preserve measurement integrity, but the regulator should still be paired with appropriate filtering and an analog-friendly reference point. Verify output ripple, load-transient response, and thermal performance under worst-case laboratory conditions before production.
Disebarkan
Battery-Powered and Portable Systems
Although the LM61440AANRJRR is not a dedicated battery charger, it can regulate a suitable protected battery or system input into a lower rail for portable electronic equipment. Its wide input range supports multiple source voltages, and the adjustable output allows local rails to be tailored to processors, radios, or sensors. The 4 A capability is useful for compact compute loads, while the low-EMI design helps reduce interference in radio-adjacent equipment. Designers must add the required battery protection, load-sharing, and power-path circuitry; the converter alone does not provide complete battery management.
Disebarkan
LED and Display Backlight Systems
The LM61440AANRJRR can serve as a buck-conversion stage in display backlight or LED systems when the input voltage and output requirements match its operating limits. The adjustable output down to 1 V provides flexibility for different LED-string and driver architectures, while the synchronous power stage can improve conversion efficiency. LED systems impose strict current regulation and transient requirements, so the LM61440 should be paired with a suitable LED driver or constant-current control stage. Confirm LED current limits, dimming behavior, and thermal margins in the complete design.
Disebarkan
Automotive and Rugged Embedded Systems
The LM61440 family’s wide input range and low-EMI synchronous architecture can be useful in rugged embedded systems, although the exact LM61440AANRJRR ordering variant must be checked for automotive qualification before use in vehicle applications. The 42 V transient tolerance may help with protected input networks, but external protection and filtering are still required. For non-automotive industrial, robotics, or transportation equipment, the device can support compact intermediate rails with up to 4 A nominal output current when thermal and transient requirements are met.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LM61440AANRJRR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LM61440AANRJRR | LM61440AASQRJRRQ1 | LM61440AANRJRR | LM61440AASRJRR | LM61440AANRJ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Penyeberangsung Jelas
- Wide input range with transient tolerance (vsTypical lower-voltage buck converters)
- Integrated synchronous power stage (vsDiscrete MOSFET buck designs)
- Compact high-frequency conversion (vsLower-frequency high-current regulators)
- Low-EMI design focus (vsStandard switching regulators without explicit low-EMI optimization)
Catatan Desain
Place the input capacitor, high-side MOSFET, low-side MOSFET, inductor, and output capacitor in the smallest practical switching loop. The LM61440AANRJRR is designed for low-EMI operation, but layout still determines how much conducted and radiated noise reaches the system. Follow the TI datasheet power-layout guidance, provide a continuous ground path, and keep sensitive signal traces away from the switching node. The 14-pin PowerVQFN exposed pad must be connected according to the manufacturer layout requirements.
Calculate conduction and switching losses using the actual input voltage, output voltage, load current, switching frequency, and selected inductor. Estimated: with VIN = 24 V, VOUT = 5 V, and IOUT = 4 A, the ideal conversion difference is 19 V × 4 A = 76 W before efficiency losses, so this operating point requires substantial thermal analysis and is not appropriate without an appropriate inductor and board design. Use the TI thermal information and exposed-pad layout guidance, and measure junction temperature in the final assembly.
Validate the inductor current rating, saturation current, output capacitance, and feedback divider against the required 4 A load and output-voltage tolerance. The 1 V minimum adjustable output does not mean every external component value is interchangeable across designs. Use the LM61440 datasheet’s recommended compensation and compensation-network procedure, account for ESR and temperature variation, and verify startup behavior at the minimum and maximum input voltages. Confirm the device’s soft-recovery behavior in the complete load-step test.
Maklumat Kesediaan
The supplied verified web results identify the product and its electrical highlights but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Automotive qualification must be checked for the exact ordering suffix.
