LPC11U24FHN33/401 - 32-bit Cortex-M0 USB MCU | NXP | 50MHz
MPN: LPC11U24FHN33/401 ✓ AktifLPC11U24FHN33/401 Ringkasan
A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripheral interfaces and power-management functions on one package. The LPC11U24FHN33/401 belongs to the LPC11Uxx family of low-cost 32-bit microcontrollers and uses the ARM Cortex-M0 instruction set. Its architecture is intended to provide efficient event-driven control, compact firmware, deterministic peripheral access and low power consumption for embedded systems.
Key characteristics include 50 MHz maximum CPU frequency, 32 KB flash, 8 KB SRAM, 4 KB data EEPROM according to the product information, and an operating voltage range of 1.8 V to 3.6 V. The device supports a 10-bit ADC and operates from -40 C to +85 C. Its 32-HVQFN package, including an exposed thermal pad, supports compact surface-mount designs and improved heat dissipation when the PCB provides adequate copper area.
The Cortex-M0 core provides a compact, low-complexity 32-bit processing environment for control loops, communication protocols, human-interface devices and data acquisition. Peripherals such as the USB device controller, ADC, UART, SPI and I2C interfaces allow the MCU to connect sensors, displays, storage devices and host systems. The 32 KB flash footprint is suitable for moderate firmware sizes, while 8 KB of SRAM supports protocol buffers, stack space and working variables.
Typical applications include USB-connected industrial peripherals, e-metering equipment, alarm systems, lighting controllers, consumer peripherals and compact sensor nodes. The USB interface can simplify connection to a host computer or USB hub, while the ADC enables direct measurement of analog inputs. For battery-operated equipment, the family’s low-power design can reduce system energy between measurement and processing events.
The principal design consideration is ensuring that firmware, USB routing, decoupling and exposed-pad thermal management are implemented together. Place input and output capacitors close to the supply pins, follow the manufacturer’s recommended USB impedance and routing guidance, and provide a continuous ground plane beneath the exposed pad. This page combines the manufacturer product information, distributor observations, package details and application guidance for engineers evaluating the LPC11U24FHN33/401.
Pilihan pengganti yang segera untuk LPC11U24FHN33/401 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
LPC11U24FHI33
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LPC11U24FHN33
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LPC11U24FHI33/401
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LPC11U24FHN33/501
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LPC11U24FHI33/501
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LPC11U24FHN33/401 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Manufacturer | NXP Semiconductors |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 KB |
| SRAM | 8 KB |
| Data EEPROM | 4 KB |
| ADC Resolution | 10 bit |
| Operating Voltage Range | 1.8 V to 3.6 V |
| Gambaran Suhu Operasi | -40 C to +85 C |
| USB Support | USB device |
| Serial Interfaces | USART, UART, SPI and I2C |
| Timer Support | 32-bit timers |
| CPU Architecture | ARM Cortex-M0 |
| Memory Architecture | 32-bit |
| Kemasan | 32-pin HVQFN, 7 x 7 mm |
| Exposed Thermal Pad | Yes |
| Jenis Pemasangan | Surface mount |
| Status RoHS | Compliant |
| Status Lingkungan Hidup | Active |
Panduan Konfigurasi Pin LPC11U24FHN33/401 32-pin hvqfn, 7 x 7 mm
Konfigurasi pin untuk LPC11U24FHN33/401 (32-pin hvqfn, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LPC11U24FHN33/401.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LPC11U24FHN33/401 patut untuk 6 aplikasis: USB-connected sensor nodes, Industrial measurement and control, USB e-meters and utility peripherals, Lighting and alarm systems, Consumer peripherals and dongles, Battery-powered embedded accessories.
USB-connected sensor nodes
The LPC11U24FHN33/401 fits compact USB sensor nodes because its USB device interface, 10-bit ADC and 50 MHz Cortex-M0 core combine measurement and host communication in one package. The 32 KB flash provides room for firmware, calibration logic and USB descriptors, while 8 KB SRAM supports sampling buffers and protocol state. A typical design connects analog inputs through protection and filtering, powers the MCU from 3.3 V, and exposes measurements over USB. Validate USB impedance, ESD protection and the exposed-pad ground connection on the PCB.
Disebarkan
Industrial measurement and control
The LPC11U24FHN33/401 is appropriate for compact industrial measurement modules that combine digital control with analog input monitoring. Its Cortex-M0 core executes control logic at up to 50 MHz, the 10-bit ADC reads process or sensor signals, and the 32 KB flash accommodates application firmware and calibration tables. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems, but the analog front end still needs suitable signal conditioning. Use the -40 C to +85 C device rating for industrial temperature planning and provide filtering for noisy sensor environments.
Disebarkan
USB e-meters and utility peripherals
The LPC11U24FHN33/401 can serve as the controller in a USB-connected energy-meter or utility peripheral because it combines a 32-bit control core, 4 KB EEPROM and USB device connectivity. Firmware can acquire sensor data, maintain counters, store calibration information and present records to a host computer. Its 32 KB flash is suitable for a focused embedded application rather than a large connected platform. Design the supply for stable metering accuracy, isolate analog inputs appropriately and verify low-current measurement paths according to the complete meter architecture.
Disebarkan
Lighting and alarm systems
The LPC11U24FHN33/401 suits LED lighting controllers and alarm-system panels that need responsive timing, serial device support and low-power behavior. Timers and event-driven firmware can handle switching sequences, sensor inputs, audible or visual alarms and configuration interfaces. The 50 MHz Cortex-M0 core provides more headroom than a simple 8-bit controller, while the 32 KB flash remains compact for dedicated products. External transistors, drivers and protection networks determine the final load capability; the MCU itself is best suited to control rather than direct high-current switching.
Disebarkan
Consumer peripherals and dongles
The LPC11U24FHN33/401 is well suited to small USB peripherals and host-connected dongles because USB device support is integrated with an efficient 32-bit core and a low 1.8 V to 3.6 V supply range. A designer can implement configuration protocols, data adapters, security-token interfaces or accessory-control functions without a higher-cost application processor. The 8 KB SRAM supports moderate buffers and stack usage, and 32 KB flash is adequate for focused firmware. Confirm USB suspend, resume and clocking requirements during system validation.
Disebarkan
Battery-powered embedded accessories
The LPC11U24FHN33/401 supports battery-powered accessories that periodically acquire data, process it locally and communicate through USB when connected. Its low-cost Cortex-M0 architecture, 32 KB flash and 8 KB SRAM are suitable for focused low-power products such as portable instruments, configuration tools and diagnostic accessories. Low-power mode selection depends on the exact peripheral clocks and USB state, so current measurements should be taken with the final firmware. Use a regulator appropriate to the battery voltage and include protection for reverse polarity and transient events.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LPC11U24FHN33/401 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LPC11U24FHI33 | LPC11U24FHN33 | LPC11U24FHI33/401 | LPC11U24FHN33/501 | LPC11U24FHI33/501 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (7 x 7 mm) | 32-HVQFN (7 x 7 mm) | 32-HVQFN (7 x 7 mm) | 32-HVQFN (7 x 7 mm) | 32-HVQFN (7 x 7 mm) | 32-HVQFN (7 x 7 mm) |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 8 KB | 6 KB | 8 KB | 6 KB | 8 KB | 6 KB |
| USB Device Support | Yes | Yes | Yes | Yes | Yes | Yes |
Penyeberangsung Jelas
- Higher SRAM allocation than the closest same-family FHI33 variant (vsLPC11U24FHI33)
- USB-enabled 32-bit control with a 50 MHz Cortex-M0 core (vsLPC11U24FHN33)
- Compact 7 x 7 mm HVQFN implementation (vsLPC11U24FHI33)
Catatan Desain
Use the manufacturer’s HVQFN32 land pattern and pin-description table for the LPC11U24FHN33/401 rather than substituting a generic QFN footprint. Connect the exposed thermal pad to the ground plane, keep the USB differential pair away from noisy switching nodes, and place the required supply and decoupling capacitors close to their associated pins. Confirm the exposed-pad geometry and paste mask against the package drawing before PCB release.
Provide a stable 3.3 V supply when operating at the upper end of the 1.8 V to 3.6 V range, and verify startup, suspend and resume behavior with the final USB implementation. Place bulk capacitance near the supply entry and local high-frequency decoupling near the device pins. The exact capacitor values and allowable ESR should be taken from the manufacturer application information and power-supply design guidance.
The 32-pin HVQFN includes an exposed pad, so thermal performance depends on the PCB copper and via arrangement as well as the ambient temperature. Use multiple thermal vias where the package and assembly process permit, maintain uninterrupted ground copper beneath the pad, and check the calculated junction temperature against the manufacturer’s maximum rating. Estimate thermal rise using the selected PCB thermal model and measured or datasheet-based power dissipation.
Do not treat the LPC11U24FHI33 as an unconditional substitute for the LPC11U24FHN33/401 because the listed SRAM capacity is 6 KB rather than 8 KB. Also verify the meaning of every ordering suffix before changing the component. A valid redesign review should compare the pin list, memory requirements, USB implementation, ADC characteristics, clock configuration, package markings and firmware image size.
Maklumat Kesediaan
RoHS compliance is identified in the product listing. Other environmental, material and automotive qualification declarations require confirmation from the manufacturer.