NXP Semiconductors

LPC2102FHN48 - 70MHz ARM7 MCU with 16KB Flash | NXP

MPN: LPC2102FHN48 ✗ Akhir Hayat
48-HVQFN, 7 x 7 mm Package 70 MHz Speed 16 KB flash Memory
MOQ: 1 |

LPC2102FHN48 Ringkasan

NXP LPC2102FHN48 is a 32-bit ARM7TDMI-S microcontroller operating up to 70 MHz, with 16 KB of embedded flash and 4 KB of SRAM in a 48-HVQFN 7 x 7 mm package. It combines an ARM7TDMI-S core, fast GPIO, ISP/IAP programming support, and a 10-bit ADC in one compact embedded-control device.

An ARM7-based microcontroller is a compact computing platform that combines a 32-bit reduced-instruction-set CPU core with embedded memory, interrupt control, and peripherals. The LPC2102 belongs to the NXP LPC2100 family and sits within the hierarchy of 32-bit MCU, embedded processor, and programmable control IC. Its ARM7TDMI-S architecture supports 32-bit code execution while retaining a relatively simple embedded peripheral structure.

The principal device characteristics include a maximum clock frequency of 70 MHz, 16 KB of flash for program storage, 4 KB of SRAM for working data, and a 10-bit ADC. In-System Programming and In-Application Programming support permit firmware download and field-update workflows, while 32 general-purpose I/O lines provide connections for sensors, actuators, communications, and control signals.

Technically, the LPC2102 combines a 128-bit memory interface and accelerator architecture designed to support efficient 32-bit instruction execution at the maximum operating frequency. The integrated ADC and fast GPIO reduce the need for external conversion and interface components in compact control systems. The 48-HVQFN package also offers a small PCB footprint, although its exposed-pad layout requires careful thermal and assembly planning.

Typical applications include industrial control, sensor acquisition, motor and actuator control, serial-interface equipment, and embedded data-acquisition systems. The 70 MHz ARM7 core is useful when firmware requires more processing capability than a basic 8-bit controller, while the 10-bit ADC supports analog measurement and threshold-control functions.

When designing a PCB, reserve the exposed thermal pad according to the NXP package drawing and provide continuous ground-plane connectivity. Confirm crystal, reset, and decoupling requirements from the manufacturer datasheet. Production firmware should also account for the limited 16 KB flash and 4 KB SRAM budgets before enabling additional peripherals or buffering schemes.

This product page consolidates the manufacturer specifications, package information, sourcing details, and engineering-oriented selection guidance. It also distinguishes the LPC2102 from adjacent LPC2100-family devices so designers can evaluate flash capacity, pin compatibility, and firmware impact before approving a replacement or second source.

Pilihan pengganti yang segera untuk LPC2102FHN48 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LPC2102FHN48 (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Package, Product Type, Programming Support, SRAM.

NXP Semiconductors
ADC Resolution: 10 bit
Package: 48-LQFP (7 mm x 7 mm)
Product Type: Single-chip 16-bit/32-bit ARM microcontroller
Bandingkan Dengan LPC2102FHN48 →

LPC2101FHN48

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-HVQFN (7 x 7 mm)
Flash memory is 8 KB versus 16 KB, a 50% reduction; CPU frequency remains 70 MHz, so existing firmware may require optimization or may not fit.

📋 Alternatif rujukan (tidak dalam katalog)

LPC2103FHN48

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 48-HVQFN (7 x 7 mm)
Single-chip 16-bit/32-bit ARM microcontroller · ARM7TDMI-S · 70 MHz · 32 kB · 8 kB · 10 bit · 8 channels · ISP/IAP

Hubungi untuk harga

Lihat Datasheet →

LPC2102FHN48 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM7TDMI-S microcontroller
CPU Architecture ARM7TDMI-S
Maximum CPU Frequency 70 MHz
Program Memory 16 KB flash
Flash Organization 16K x 8 bits
SRAM 4 KB
ADC Resolution 10 bits
General-Purpose I/O 32 lines
Programming Support ISP and IAP
Kemasan 48-HVQFN, 7 x 7 mm
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin LPC2102FHN48 48-hvqfn, 7 x 7 mm

Konfigurasi pin untuk LPC2102FHN48 (48-hvqfn, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-hvqfn, 7 x 7 mm untuk LPC2102FHN48

Tiada data garisan pin yang diperoleh untuk LPC2102FHN48.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LPC2102FHN48 patut untuk 6 aplikasis: Industrial Sensor Acquisition, Serial Communication Equipment, Motor and Actuator Control, Remote Monitoring Node, Data Acquisition Controller, Educational Controller Platform.

🏭

Industrial Sensor Acquisition

The LPC2102FHN48 is appropriate for compact industrial measurement systems that combine several analog inputs with deterministic digital control. Its 10-bit ADC and 32 GPIO lines allow sensors, threshold inputs, and actuator drivers to share one microcontroller, while the 70 MHz ARM7TDMI-S core can execute filtering and control calculations between samples. The 16 KB flash budget is adequate for focused acquisition firmware but favors short routines and carefully selected libraries. Because the device also supports ISP and IAP, production fixtures can program it and deployed units can receive controlled updates. The enclosure should provide regulated core and I/O rails, proper grounding, and protection for externally connected sensor lines.

🌐

Serial Communication Equipment

The LPC2102FHN48 can serve as the embedded controller in compact serial gateways, instrument controllers, and service equipment requiring deterministic 32-bit processing. Its 70 MHz ARM7TDMI-S core supports protocol handling, framing, diagnostics, and supervisory logic without a separate processor. Sixteen kilobytes of flash and 4 KB of SRAM make memory budgeting especially important when buffering complete messages or supporting several communication protocols. The integrated ADC can monitor supply, temperature sensors, or analog status channels. ISP is useful for manufacturing, while IAP can enable controlled firmware maintenance. The PCB should provide clean separation between communications interfaces and the MCU supply network to reduce noise and ground-current coupling.

🤖

Motor and Actuator Control

The LPC2102FHN48 fits compact motor-position and actuator-control subsystems where fast GPIO handling, a 32-bit core, and mixed analog monitoring are valuable. The 32 GPIO lines can carry encoder inputs, stepper-control signals, limit-switch inputs, and driver-enable signals, while the 10-bit ADC can supervise current, position, or temperature channels. Its 70 MHz operating capability allows the control firmware to combine position calculation, fault detection, and real-time sequencing. The 16 KB flash limit encourages modular, compact code, and the 4 KB SRAM requires avoiding unnecessary large buffers. Power-stage switching noise should be kept away from ADC and clock routing, with grounding and bulk decoupling designed around the complete power subsystem.

🧩

Remote Monitoring Node

The LPC2102FHN48 is suitable for a compact remote-monitoring node that gathers local sensor readings and reports status through a serial or network-assisted link. Its 32 GPIO lines can support digital presence, alarm, and relay-control functions, while the integrated 10-bit ADC handles less demanding analog measurements. The 70 MHz ARM7TDMI-S processor provides enough throughput for sampling, filtering, and communication framing, but the memory footprint limits the complexity of locally buffered data. ISP and IAP improve deployment and maintenance by supporting fixture programming and controlled firmware updates. In a remote installation, a low-power architecture may require the MCU to remain mostly idle between samples, so peripheral clock gating and communication duty cycle should be considered during firmware design.

📊

Data Acquisition Controller

The LPC2102FHN48 can act as the control and conditioning element in a small data-acquisition subsystem where the required sample rate fits its 10-bit ADC and the firmware fits within 16 KB of flash. The 70 MHz core can perform averaging, calibration, scaling, and event handling, while 32 GPIO lines provide ready signals, range selection, and digital data tagging. Four kilobytes of SRAM should be allocated carefully because simultaneous conversion buffers and communication queues can consume it quickly. For production, ISP allows fixture-based programming, while IAP provides a path for controlled parameter or firmware updates. Analog input filtering, reference stability, and digital isolation remain essential for repeatable measurements in the completed instrument.

🔧

Educational Controller Platform

The LPC2102FHN48 is well suited to education and embedded-systems training because it combines a recognizable ARM7TDMI-S core with GPIO, ADC, flash, SRAM, and ISP/IAP in one package. Students can use its 70 MHz execution capability to study interrupts, peripheral interfacing, flash organization, and real-time control while keeping the hardware footprint small. The 16 KB flash and 4 KB SRAM make memory usage visible and encourage disciplined linker placement and efficient routines. ISP simplifies laboratory programming and board bring-up, while the ADC supports straightforward signal-conditioning exercises. A training board should still provide accessible expansion headers, protected I/O, stable supplies, and a clearly documented pin map based on the manufacturer datasheet.

What are the key specifications of LPC2102FHN48 that engineers should know?
The LPC2102FHN48 combines a 32-bit ARM7TDMI-S core, 70 MHz maximum operating frequency, 16 KB flash, 4 KB SRAM, 32 GPIO lines, and a 10-bit ADC in a 48-HVQFN package. According to the NXP product page, this LPC2100-family device also supports In-System Programming and In-Application Programming. Its main engineering limitation is the small memory footprint, so code and data buffering must be planned conservatively.
What is the operating voltage range of LPC2102FHN48?
The LPC2102FHN48 requires multiple supply rails, and the manufacturer datasheet should be consulted for their exact operating ranges. The core and I/O voltage limits cannot be substituted with a generic 3.3 V assumption because the device supports separate core and peripheral supplies. Use the NXP recommended operating conditions and pin-connection table when selecting regulators, decoupling capacitors, and logic-level interfaces.
How much program memory and RAM does LPC2102FHN48 have?
The LPC2102FHN48 provides 16 KB of flash memory, organized as 16K x 8 bits, and 4 KB of SRAM. According to the NXP product information, the flash supports ISP and IAP workflows. These resources suit compact control tasks, but they require careful linker planning when the firmware includes libraries, diagnostics, communication stacks, or buffered data acquisition.
Where can I download the LPC2102FHN48 datasheet PDF?
The official LPC2102FHN48 datasheet PDF is available through the NXP product page at https://www.nxp.com/part/LPC2102FHN48. Use the manufacturer document for pin descriptions, recommended operating conditions, package dimensions, clock requirements, and initialization sequences. The product page identifies the device as an ARM7TDMI-S microcontroller with 16 KB flash, ISP/IAP support, fast ports, and a 10-bit ADC.
Where can I find the LPC2102FHN48 pinout and 48-HVQFN footprint?
The LPC2102FHN48 uses a 48-HVQFN package measuring 7 x 7 mm. Pin assignments, exposed-pad dimensions, and the recommended land pattern are documented in the manufacturer datasheet and package drawing. Before routing a PCB, confirm every ball assignment, the exposed thermal pad connection, and the orientation marker directly against those documents rather than relying on a generic QFN footprint.
Can LPC2103FHN48 replace LPC2102FHN48 on the same PCB?
The LPC2103FHN48 is a close physical candidate from the same LPC2100 family, but its higher flash capacity changes the memory map and can affect existing firmware. According to the NXP family information, the LPC2101, LPC2102, and LPC2103 share the ARM7TDMI-S architecture and embedded high-speed flash concept. PCB compatibility still requires ball-by-ball verification, while firmware must be rebuilt and tested for the larger memory.
Can LPC2101FHN48 replace LPC2102FHN48 without a PCB change?
The LPC2101FHN48 is a physically related LPC2100-family option, but its flash capacity is lower than that of the LPC2102FHN48, so existing code may not fit and boot behavior may change. NXP describes the family as sharing the ARM7TDMI-S CPU and high-speed embedded flash architecture. Treat this as a design migration requiring pin, memory-map, startup, and firmware validation rather than an automatic substitution.
What is the best drop-in replacement for LPC2102FHN48?
No unqualified drop-in replacement should be selected without checking the manufacturer pinout, memory map, and supply requirements. LPC2101FHN48 and LPC2103FHN48 are the closest same-family physical candidates identified, but their flash capacities differ from the LPC2102FHN48. For an existing design, retain the original device when possible or qualify a candidate through schematic review, firmware rebuild, and board-level validation.
When should I choose LPC2102FHN48 over a newer microcontroller?
Choose LPC2102FHN48 when an established ARM7TDMI-S design, 70 MHz processing, 10-bit ADC, and 16 KB flash are sufficient and maintaining the LPC2100 hardware platform is valuable. A newer MCU may be preferable when broader peripheral support, larger memory, faster acquisition, newer security features, or an active product lifecycle is required. The archived NXP content indicates that migration planning is important.
Is LPC2102FHN48 suitable for industrial sensor acquisition and control?
The LPC2102FHN48 is suitable for compact sensor-acquisition and control systems requiring a 32-bit core, 32 GPIO lines, and an integrated 10-bit ADC. Its 70 MHz ARM7TDMI-S processor can manage sampling, filtering, and real-time control tasks, while ISP/IAP supports programmed deployment. Industrial suitability still depends on temperature rating, supply tolerance, isolation, EMC protection, and long-term availability.
Where to buy LPC2102FHN48 online and what is the current lead time?
Use the Request a Quote form on this page to request LPC2102FHN48 pricing, stock confirmation, and the current lead time. The manufacturer product page contains historical product information, and distributor listings indicate market availability, but quantity and delivery schedules can change. Provide the required package, quantity, date code, and inspection requirements with the request for an actionable quotation.
What is the price of LPC2102FHN48?
Current LPC2102FHN48 pricing is best obtained through the Request a Quote form on this page. Price can vary with order quantity, date-code requirement, packaging, inspection level, and market conditions. The request should include the required quantity and any traceability or condition requirements so the returned quotation reflects the exact configuration.
Is LPC2102FHN48 in stock and how long is the lead time?
Current stock and lead time for LPC2102FHN48 should be confirmed through the Request a Quote form on this page. The NXP product page describes the device but uses archived content, so it should not be interpreted as a live inventory commitment. Submit the required quantity, package preference, date-code requirement, and target delivery date for an exact supply response.
What can replace LPC2102FHN48?
The closest candidates are the same-family LPC2101FHN48 and LPC2103FHN48, but neither is an automatic functional replacement because their flash capacities differ from 16 KB. According to NXP, these devices use the same ARM7TDMI-S family concept. A valid replacement must match the 48-HVQFN connections, supply rails, reset and clock behavior, and boot memory map while passing revised firmware validation.
Does LPC2102FHN48 support programming through ISP and IAP?
Yes, the LPC2102FHN48 supports In-System Programming and In-Application Programming. NXP identifies these features as part of the LPC2100 family's embedded high-speed flash architecture. ISP is useful for initial programming or production fixtures, while IAP can support controlled firmware updates after deployment. The applicable bootloader, flash timing, and update procedure must be implemented according to the NXP datasheet and user manual.

Data referensi kejuruteraan untuk LPC2102FHN48 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the LPC2102FHN48 when an ARM7TDMI-S design needs 70 MHz performance, 16 KB of flash, 4 KB of SRAM, 32 GPIO lines, and an integrated 10-bit ADC without moving away from the LPC2100 platform. Select LPC2101FHN48 only when the lower 8 KB flash capacity is sufficient and reducing program-memory demand is valuable. Consider LPC2103FHN48 when additional flash is needed for larger application code, diagnostics, or future updates; its 32 KB memory changes the device architecture and requires image-map validation. None of these family members should be treated as an automatic substitution without checking the exact ball assignment, supply requirements, reset behavior, boot implementation, and existing firmware. For new designs with much larger memory, faster conversion, or newer peripheral requirements, evaluate a current MCU family rather than preserving the legacy platform.

Perbandingan dengan Gantian

Parametr Produk Ini LPC2101FHN48 LPC2103FHN48
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-HVQFN (7 x 7 mm) 48-HVQFN (7 x 7 mm) 48-HVQFN (7 x 7 mm)
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 70 MHz 70 MHz 70 MHz
Flash Memory 16 KB 8 KB 32 KB
SRAM 4 KB 4 KB 4 KB
ADC Resolution 10 bits 10 bits 10 bits
Programming Support ISP and IAP ISP and IAP ISP and IAP
General-Purpose I/O 32 lines 32 lines 32 lines

Penyeberangsung Jelas

  • Balanced flash and SRAM allocation (vsLPC2101FHN48)
  • Smaller program footprint than the larger-flash family member (vsLPC2103FHN48)
  • Integrated analog conversion with 32-bit control (vsLPC2101FHN48)

Catatan Desain

Place the MCU and its required support components according to the NXP recommended layout, beginning with the 48-HVQFN land pattern and exposed-pad connection. Keep the exposed pad tied to the appropriate ground plane and use the maximum practical copper area for thermal spreading. Verify courtyard clearance, solder mask definition, paste stencil, and assembly orientation against the current manufacturer package drawing rather than a generic QFN footprint.

Separate the core and I/O supply requirements in the power tree and follow the manufacturer limits for voltage, sequencing, and decoupling. Place required bulk and high-frequency capacitors at their specified pins with short ground paths. Avoid routing ADC inputs, reset, and the 70 MHz clock through areas containing switched-power return currents, because supply disturbance can affect timing, conversion accuracy, and startup reliability.

Do not assume that the higher flash capacity of LPC2103FHN48 makes existing LPC2102FHN48 firmware interchangeable. Memory addresses, vector placement, startup code, and application constants can move when the flash map changes. Likewise, the lower flash capacity of LPC2101FHN48 can create code-size or data-placement failures. Rebuild the image and review startup and bootloader assumptions whenever either family member is considered as a replacement.

Keep the 70 MHz clock route short, continuous, and referenced to a low-impedance ground plane, with the crystal or oscillator circuit placed close to the clock pins. Avoid test pads or long stubs on sensitive clock and ADC traces. If analog conversion accuracy is important, use a quiet reference and analog ground strategy appropriate for the complete board rather than treating the 10-bit ADC as sufficient to compensate for noisy layout.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The NXP product page contains archived historical information. Explicit RoHS, REACH, halogen-free, lead-free, and conflict-minerals declarations were not identified, so these fields remain unknown.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LPC2102FHN48 datasheet LPC2102FHN48 datasheet pdf LPC2102FHN48 pinout LPC2102FHN48 replacement LPC2102FHN48 equivalent LPC2102FHN48 cross reference LPC2102FHN48 price LPC2102FHN48 stock NXP LPC2102FHN48 LPC2102FHN48 70MHz 16KB flash LPC2102FHN48 48-HVQFN LPC2102FHN48 ADC application LPC2102FHN48 vs LPC2103FHN48 LPC2102FHN48 vs LPC2101FHN48 LPC2102FHN48 ISP IAP programming

Komponen dan Tanda berkaitan

NXP Semiconductors LPC2102FHN48 LPC2101FHN48 LPC2103FHN48 ARM7TDMI-S 32-bit microcontroller ARM microcontroller embedded processor reduced-instruction-set computing embedded flash memory SRAM In-System Programming In-Application Programming 10-bit ADC general-purpose I/O 48-HVQFN QFN package family surface-mount package industrial control sensor acquisition motor control data acquisition data logger 70 MHz 16 KB flash
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ