M2GL010-1TQ144 - 12K-LUT Flash FPGA | Microchip Technology
MPN: M2GL010-1TQ144 ✓ AktifM2GL010-1TQ144 Ringkasan
A field-programmable gate array is a semiconductor whose digital logic is defined after fabrication by loading a configuration bitstream. Within the broader hierarchy of digital semiconductors, an FPGA sits between fixed-function logic devices and software-programmable processors. Microchip positions the IGLOO 2 family for general-purpose functions such as protocol bridging, I/O expansion, signal conversion, system management, secure connectivity, image processing, and communications control.
The M2GL010-1TQ144 provides 12,084 logic cells, 84 user I/O, 1.2 V operation, and nonvolatile flash configuration. These characteristics make it suitable for compact control and interface logic where a small CPLD would be too restrictive but a larger FPGA would add unnecessary cost, board area, and design complexity. Its 144-pin package also provides more I/O connectivity than smaller IGLOO 2 package options.
The IGLOO 2 architecture supports the rapid parallel logic required by communications links, industrial interfaces, and embedded control systems. Because the configuration is stored in flash, the device can restart with the same programmed function without requiring an external loader. Programming and verification still require a compatible programming interface, and the complete pin assignments and bank voltages must be checked in the Microchip packaging and pin-description documentation before layout is released.
Typical uses include industrial protocol bridges, data-acquisition interfaces, display and image-processing control, secure connectivity functions, communications infrastructure, medical equipment, and defense or aviation subsystems. These applications benefit from parallel hardware logic, nonvolatile configuration, and a moderate logic-cell count rather than a soft-processor-centered architecture.
The primary layout consideration is the 144-pin TQFP footprint. Follow the manufacturer pin-description table for every power, ground, configuration, clock, and user-I/O connection, and preserve all decoupling requirements around the 1.2 V core. Configuration pins, programming access, and user I/O can constrain the board floorplan even when only a small portion of the 12,084 logic cells is used.
This product page combines the manufacturer family information, package and device identifiers, pinout documentation location, same-package alternatives, and practical design guidance. It helps engineers evaluate the M2GL010-1TQ144 as a compact, low-density flash FPGA while keeping footprint, I/O, speed-grade, and configuration requirements central to the replacement decision.
Pilihan pengganti yang segera untuk M2GL010-1TQ144 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera M2GL010-1TQ144 (sama faktor bentuk dan kaki) — berbeza dalam Device Type, Configuration Memory, Logic Elements, Package Type, Programmable Logic.
M2GL010-TQ144
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →M2GL010-TQG144
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →M2GL010-1TQ144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010-1TQG144
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010-1TQG144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010-TQG144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010-1TQ144 Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | IGLOO 2 low-density flash FPGA |
| Logic Cells | 12,084 cells |
| User I/O | 84 I/O |
| Core Supply Voltage | 1.2 V |
| Kemasan | 144-pin TQFP |
| Package Type | LQFP/TQFP surface-mount package |
| Jenis Pemasangan | Surface mount |
| Configuration Memory | Embedded nonvolatile flash |
| FPGA Architecture | IGLOO 2 |
| Programmability | User-programmable digital logic |
Panduan Konfigurasi Pin M2GL010-1TQ144 lqfp/tqfp surface-mount package
Konfigurasi pin untuk M2GL010-1TQ144 (lqfp/tqfp surface-mount package pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk M2GL010-1TQ144.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
M2GL010-1TQ144 patut untuk 6 aplikasis: Industrial Protocol Bridging, Data Acquisition Interface, Secure Connectivity Control, Display and Image Processing, Medical and Diagnostic Equipment, Communications Control Plane.
Industrial Protocol Bridging
The M2GL010-1TQ144 fits industrial protocol-bridging designs that translate or condition parallel digital interfaces. Its 12,084 logic cells provide capacity for state machines, bus converters, handshake logic, and interface arbitration, while 84 user I/O support connections to multiple external devices. According to the Microchip IGLOO 2 family description, bridging and signal conversion are core intended uses. A key design consideration is timing margin: the -1 speed grade must be checked against the slowest interface requirement, and the board must preserve clean clocking and termination for high-speed signals.
Disebarkan
Data Acquisition Interface
The M2GL010-1TQ144 is appropriate for data-acquisition front ends that need parallel capture control, channel sequencing, trigger handling, and buffer-management logic. Its 12,084 logic cells and 84 user I/O allow multiple acquisition channels to be coordinated without relying on a microcontroller for every timing-critical operation. The embedded flash retains the acquisition configuration through power cycles, which simplifies field updates after programming. Designers should assign acquisition and trigger signals to suitable I/O banks and use the manufacturer's pin-description table to preserve each bank's voltage requirements.
Disebarkan
Secure Connectivity Control
The M2GL010-1TQ144 supports secure-connectivity functions by combining deterministic hardware logic with nonvolatile configuration storage. Its 12,084 logic cells can implement packet framing, command interpreters, status monitoring, and interface isolation in a compact 144-pin package. According to the Microchip IGLOO 2 product resources, secure connectivity is an intended application for the family. The design should partition sensitive and general-purpose logic appropriately, protect programming access, and verify configuration-update procedures before allowing field deployment.
Disebarkan
Display and Image Processing
The M2GL010-1TQ144 can implement display timing, pixel-format conversion, video timing generation, and image pre-processing as parallel FPGA logic. With 12,084 logic cells and 84 user I/O, it offers enough resources for compact pipeline stages without moving every operation into a processor. According to Microchip, the IGLOO 2 family is used for image-processing functions in communications, industrial, medical, and defense-related systems. Timing closure, output standards, and clock budgets should be evaluated against the selected I/O standards before finalizing the device and board configuration.
Disebarkan
Medical and Diagnostic Equipment
The M2GL010-1TQ144 is suitable for control and signal-conditioning logic in medical and diagnostic equipment where compact, deterministic hardware operation is valuable. Its 12,084 logic cells can coordinate sensors, perform protocol conversion, and manage acquisition sequencing, while embedded flash provides retained configuration. According to the Microchip IGLOO 2 family page, IGLOO 2 devices are used in medical markets for general-purpose functions. Device selection must account for the required temperature grade, regulatory design controls, and any application-specific validation obligations.
Disebarkan
Communications Control Plane
The M2GL010-1TQ144 can implement communications control-plane functions such as framing, multiplexing, traffic classification, error handling, and line-card management. Its 12,084 logic cells and 84 user I/O support several moderate-speed parallel interfaces without requiring a larger FPGA. According to Microchip, communications equipment is a principal IGLOO 2 application area, including bridging and control functions. Designers should budget timing margin for the -1 grade, keep clock domains well defined, and apply the manufacturer's guidance for I/O standards and board-level signal integrity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk M2GL010-1TQ144 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | M2GL010-TQ144 | M2GL010-TQG144 | M2GL010-1TQ144I | M2GL010-1TQG144 | M2GL010-1TQG144I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-144 | TQFP-144 - same package | TQFP-144 - same package | TQFP-144 - same package | TQFP-144 - same package | TQFP-144 - same package |
| FPGA Family | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 |
| Logic Cells | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells | 12,084 cells |
| User I/O | 84 I/O | 84 I/O | 84 I/O | 84 I/O | 84 I/O | 84 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -1 grade | Standard grade | Standard grade | -1 grade | -1 grade | -1 grade |
| Qualification Suffix | No G suffix | No G suffix | G suffix | No G suffix; I suffix | G suffix | G suffix and I suffix |
Penyeberangsung Jelas
- Higher -1 speed-grade option in the 12,084-cell family (vsM2GL010-TQ144)
- Industrial-temperature ordering option without changing the footprint (vsM2GL010-1TQ144)
- G-qualified source option with the required logic resources (vsM2GL010-TQ144)
Catatan Desain
Use the Microchip IGLOO 2 Packaging and Pin Descriptions User Guide to assign every TQFP-144 connection before routing. Separate configuration pins from ordinary user I/O in the schematic hierarchy, then confirm the package footprint against the mechanical drawing rather than relying on a generic 144-pin symbol. This prevents errors involving exposed configuration pins, supply pins, and ground connections that a symbol-only review can miss.
Decouple the 1.2 V core rail at the device using the capacitance and placement specified by the manufacturer. Keep the power and ground distribution symmetrical, minimize loop area, and isolate noisy digital return currents from sensitive interface references. Because an FPGA can switch many I/O banks concurrently, adequate local supply current delivery and return paths are essential for reliable operation at the -1 speed grade.
Assign clock and high-speed interface signals according to the manufacturer's bank and pin guidance, and use short return paths for each interface. If external memories, transceivers, or ADC and DAC components accompany the FPGA, match trace lengths where required by the interface specification. Add series damping or source termination only after analyzing the actual edge rate, trace impedance, and receiver thresholds rather than applying a fixed value indiscriminately.
Do not treat every ordering variant with the same 144-pin outline as an unconditional substitute. The -1 suffix changes the speed grade, while G and I suffixes identify other device attributes. Compare the exact ordering code against timing, temperature, qualification, and programming requirements. A mechanically compatible part can still be electrically or commercially unsuitable if its documented grade differs from the original design constraint.
Maklumat Kesediaan
Compliance attributes for the exact M2GL010-1TQ144 ordering code require confirmation from Microchip or the manufacturer's product documentation.
