M2GL010TS-FG484 - 12K LEs, 233 I/O BGA FPGA | Microchip
MPN: M2GL010TS-FG484 ✓ AktifM2GL010TS-FG484 Ringkasan
An FPGA is a semiconductor whose digital logic is configured after manufacture. Within the product hierarchy, the M2GL010TS-FG484 is an IGLOO 2 FPGA, then a programmable-logic IC, then a general-purpose semiconductor. These devices bridge the gap between fixed-function controllers and larger application-specific processors by allowing designers to implement parallel interfaces, protocol bridges, control logic, and signal-processing functions in hardware.
Key features include 12,000 logic elements, 233 I/O, and a 1.14 V to 2.625 V supply range. Its 484-ball BGA package provides a high pin count for demanding I/O expansion, but it also requires careful escape routing, multilayer PCB construction, and assembly processes capable of handling fine-pitch balls. The flash-based configuration architecture supports nonvolatile FPGA operation, while the low-density resource set targets embedded control and interface applications rather than processor-scale workloads.
Microchip positions the IGLOO 2 family for Gigabit Ethernet control planes, dual PCI Express control planes, protocol bridging, I/O expansion and conversion, video and image processing, system management, and secure connectivity. Parallel hardware logic can reduce microcontroller interrupt overhead, consolidate several discrete interface devices, and provide deterministic response timing. The architecture is especially useful where multiple external interfaces must be coordinated with low standby power or where software-defined behavior must be adapted without changing the PCB.
Typical implementations include industrial communication gateways, PCI Express interface controllers, video-format converters, peripheral expansion hubs, and embedded system-management controllers. The 233 available I/O can support multiple buses, status signals, and high-speed serial interfaces when the relevant differential-capable I/O groups are assigned correctly. Designers should review the pin-description user guide before assigning power, configuration, clock, and high-speed interface pins.
A key design consideration is that a 484-ball BGA concentrates many connections in a compact land pattern. Use the manufacturer package and pin-description documentation for ball assignment, power-plane segmentation, and fanout. Confirm that the board stack, via structure, assembly process, and test coverage support the package geometry before committing the design to production.
This page organizes the M2GL010TS-FG484 electrical characteristics, package details, ordering-code comparisons, and drop-in alternatives into an engineering-focused resource. It also identifies application-specific design considerations that help shorten FPGA selection, schematic review, and PCB planning.
Pilihan pengganti yang segera untuk M2GL010TS-FG484 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera M2GL010TS-FG484 (sama faktor bentuk dan kaki) — berbeza dalam Configuration Memory, Device Type, Package.
M2GL010-FG484
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →M2GL010TS-1FG484M
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010T-1FG484M
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010TS-1FG484MX399
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010TS-1FG484I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
M2GL010TS-FG484 Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | IGLOO 2 flash FPGA |
| Logic Elements | 12,000 logic elements (12K LEs) |
| User I/O Count | 233 I/O |
| Core Supply Voltage Range | 1.14 V to 2.625 V |
| Kemasan | 484-ball BGA |
| Jenis Pemasangan | Surface mount |
| Configuration Memory | Embedded flash |
| FPGA Family | IGLOO 2 |
| Product Series | M2GL010TS |
| Ball Terminal Pitch | 1.00 mm |
| Seated Height | Not exceeding 2.44 mm |
| Industrial Temperature Range | -55 °C to +125 °C |
| Automotive Grade | Grade 2, -40 °C to +125 °C junction temperature |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
| Kiraan Pin | 484 balls |
Panduan Konfigurasi Pin M2GL010TS-FG484 484-ball bga
Konfigurasi pin untuk M2GL010TS-FG484 (484-ball bga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk M2GL010TS-FG484.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
M2GL010TS-FG484 patut untuk 6 aplikasis: Gigabit Ethernet Control Plane, PCI Express Control and Interface Expansion, Video and Image Format Conversion, Industrial System Management, Secure Connectivity and Protocol Bridging, Peripheral Expansion and I/O Conversion.
Gigabit Ethernet Control Plane
The M2GL010TS-FG484 fits a Gigabit Ethernet control-plane implementation that separates traffic handling, status logic, and register-based management from a host processor. Its 12,000 logic elements and 233 I/O provide substantial parallel capacity for packet classification, descriptor movement, interrupt generation, and interface conversion. The flash-based IGLOO 2 architecture also allows the control function to retain its configuration when the main system resets. A practical design can pair the FPGA with a network controller or PHY, using dedicated clock inputs and differential-capable I/O where the selected interface requires them. The key trade-off is board complexity: a 484-ball BGA at 1.00 mm pitch demands multilayer escape routing and an assembly process capable of handling the fine-pitch land pattern.
Disebarkan
PCI Express Control and Interface Expansion
The M2GL010TS-FG484 is suitable for a PCI Express control-plane or interface-expansion function because the IGLOO 2 family supports parallel logic-intensive tasks such as transaction handling, bridge control, and protocol translation. The 233 I/O offer more board-level connectivity than a small microcontroller, allowing status, interrupt, clock, and multiple peripheral buses to be consolidated into one programmable device. Designers can implement interface state machines and data-path assistance directly in parallel hardware, reducing processor interrupt overhead. Timing closure remains the principal concern because the available logic, routing, and speed grade must support the selected PCI Express data-path width. The 484-ball package also requires fanout through buried or blind microvias when signal escape cannot be routed directly on the outer layers.
Disebarkan
Video and Image Format Conversion
The M2GL010TS-FG484 can implement video timing, format conversion, and image-stream routing where parallel pixel data and control signals must be processed deterministically. Its 12K logic elements support timing generators, line and pixel counters, synchronization logic, and limited stream processing, while 233 I/O provide access to multi-bit buses and synchronization signals. The device is most appropriate for moderate-resolution or interface-specific conversion rather than computationally intensive image analysis. Hardware implementation can produce predictable frame timing and reduce CPU loading compared with a software-only pipeline. Layout must preserve matched routing for related data bits and isolate clocks appropriately, while the 484-ball BGA assembly plan should include appropriate X-ray or continuity inspection for production reliability.
Disebarkan
Industrial System Management
The M2GL010TS-FG484 fits an industrial system-management controller that must combine power sequencing, fault monitoring, interlock logic, watchdog behavior, and communications in a compact programmable platform. Its flash configuration retains the management function across power cycles, and its 233 I/O allow numerous board-status inputs and actuator controls to be handled in parallel. The 12K-LE fabric is suitable for state machines, event logging control, and peripheral arbitration without requiring a larger processor. Industrial temperature and qualification requirements should be checked against the exact ordering code before deployment. Because the package is a 1.00 mm-pitch 484-ball BGA, power and ground distribution must be planned for simultaneous processor and I/O activity, with layer transitions and via current capacity validated under worst-case switching conditions.
Disebarkan
Secure Connectivity and Protocol Bridging
The M2GL010TS-FG484 can implement secure-connectivity and protocol-bridging functions that translate between incompatible bus widths, framing formats, or timing conventions. The 233 I/O and 12K logic elements allow stateful bridge logic, packet filtering, command translation, and status monitoring to run in parallel hardware. Flash configuration is valuable when the bridge must restart with a defined function without external configuration memory. Security functions must be implemented against the manufacturer’s supported cryptographic and authentication capabilities rather than inferred from the generic FPGA category. Signal integrity should be evaluated for each interface standard, with termination, clocking, and voltage levels selected per the IGLOO 2 pin-description guide. The fine-pitch BGA footprint also requires careful component placement so that decoupling and external interfaces do not obstruct assembly or test access.
Disebarkan
Peripheral Expansion and I/O Conversion
The M2GL010TS-FG484 is well suited to consolidating several narrow peripheral interfaces into a common internal interface. Designers can use its 12,000 logic elements for format converters, arbitration, FIFO control, interrupt aggregation, and timing state machines while utilizing 233 I/O for external signals. This approach can replace several glue-logic devices and shorten the distance between peripheral data and the system controller. Electrical standards differ by I/O bank, so each external interface requires verification of voltage compatibility, slew behavior, and input thresholds. Power sequencing should prevent back-powering through unused outputs during startup. A 484-ball package reduces board area relative to many discrete packages but increases routing and assembly sophistication, making stackup planning, via-in-pad policy, and solder-mask design important early decisions.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk M2GL010TS-FG484 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | M2GL010-FG484 | M2GL010TS-1FG484M | M2GL010T-1FG484M | M2GL010TS-1FG484MX399 | M2GL010TS-1FG484I |
|---|---|---|---|---|---|---|
| Package | 484-BGA | 484-BGA - same FG package designation | 484-BGA - same FG package designation | 484-BGA - same FG package designation | 484-BGA - same FG package designation | 484-BGA - same FG package designation |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 | IGLOO 2 |
| Logic Elements | 12K LEs | 12K LEs | 12K LEs | 12K LEs | 12K LEs | 12K LEs |
| User I/O | 233 I/O | 233 I/O | 233 I/O | 233 I/O | 233 I/O | 233 I/O |
| Configuration Memory | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
| Ordering-Code Characteristics | TS/FG484 grade | No TS ordering segment | -1 speed designation and M suffix | T ordering segment and M suffix | -1 speed designation and X399 industrial suffix | -1 speed designation and I suffix |
| Special Feature | Nonvolatile flash configuration | Nonvolatile flash configuration | Nonvolatile flash configuration | Nonvolatile flash configuration | Industrial-temperature ordering option | Industrial-grade ordering option |
Penyeberangsung Jelas
- High I/O density in a compact BGA (vsM2GL010TS-FGG484)
- Exact 12K-LE IGLOO 2 resource class (vsM2GL050-1VF400)
- Configuration retention through embedded flash (vsM2GL010-FG484)
- Defined industrial-temperature option within the family (vsM2GL010TS-1FG484I)
Catatan Desain
Plan the M2GL010TS-FG484 as a fine-pitch BGA design rather than treating it as a conventional perimeter package. The 484-ball, 1.00 mm-pitch arrangement generally requires multilayer escape routing, and the number of via layers should be based on the selected PCB stackup rather than a fixed rule. Assign power, ground, clocks, and high-speed pairs in the pin-description user guide before freezing the component placement. Confirm that the assembly house supports the package dimensions, solder-mask definition, land pattern, and inspection method used by the production design.
Create the core and I/O power plan from the manufacturer bank and pin-description documentation. The M2GL010TS-FG484 has a 1.14 V to 2.625 V core-supply range, but external I/O standards and configuration pins may use different voltage domains. Place local bulk and high-frequency decoupling at the device power balls with low-loop routing, and provide multiple power and ground connections as specified by the package drawing. Review startup current, I/O current, and simultaneous switching across the complete design rather than sizing the supply from a single typical operating point.
Map clock, differential, and high-speed interface assignments directly from the IGLOO 2 Packaging and Pin Descriptions User Guide. Preserve the intended polarity and byte or lane grouping of parallel signals to limit skew, and route clocks away from noisy switching nets where practical. For each external interface, verify the voltage standard against the selected I/O bank before connecting pins. Because the part uses a 484-ball BGA, layer-transition vias can introduce discontinuities; simulate representative corner cases and review the return path when moving a high-speed net between layers.
Do not assume that every 484-ball IGLOO 2 ordering code uses the same PCB footprint. In particular, the FG484 and FGG484 package dimensions must be checked before substitution, even though both use a 484-ball BGA designation. Also avoid assuming that similar logic-element counts guarantee timing, temperature, or qualification equivalence. For a replacement, compare the exact speed code, temperature grade, package revision, I/O standards, configuration method, and bitstream timing before releasing the design.
Maklumat Kesediaan
The automotive product brief describes grade 2 IGLOO 2 devices, but the exact compliance status of M2GL010TS-FG484 was not stated. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.