MAX118EAI+ - 8-Bit 8-Channel 1Msps ADC | Analog Devices
MPN: MAX118EAI+ ✓ AktifMAX118EAI+ Ringkasan
A flash ADC is a parallel-input data converter that uses multiple internal comparators to convert an analog voltage into a digital code in one conversion cycle. The MAX118 family provides microprocessor-compatible 4-channel and 8-channel options for designers who need rapid sampling without the complexity of a serial data interface. Its 1µA power-down mode makes it especially useful when the acquisition circuit must remain available while consuming very little standby power.
The MAX118EAI+ provides eight 8-bit conversion channels, a 1Msps conversion rate, an external reference, and an active-low power-down input. The parallel output arrangement can connect directly to a suitable microprocessor, microcontroller, FPGA, or input/output interface. The 28-SSOP package offers more input and control pins than small serial-interface ADC packages, making careful PCB planning important for signal routing and grounding.
Its half-flash architecture supports a typical conversion time of 660ns, equivalent to a throughput of 1Msps. The eight-bit resolution provides 256 code levels per input, making the converter appropriate for position sensing, simple process monitoring, digital potentiometer feedback, industrial control, and embedded data acquisition. Conversion timing, input settling, reference stability, and the acquisition system’s bandwidth must be evaluated together when interpreting sampled results.
Typical uses include industrial control panels, multichannel sensor interfaces, battery-powered monitoring equipment, laboratory measurement systems, and microcontroller-based instrumentation. The active-low power-down feature can disable the converter during idle periods and return it to normal operation in less than 200ns, according to the manufacturer’s MAX118 product page.
Design the MAX118EAI+ around a low-impedance reference, short analog input paths, and a quiet return plane. Place input and reference decoupling close to the device, route digital output traces away from sensitive analog inputs, and account for logic levels when interfacing the parallel outputs to another digital component. The 28-SSOP footprint requires adequate routing space for eight channels and the associated digital signals.
This product page combines manufacturer specifications, sourcing guidance, verified drop-in alternatives, and practical PCB considerations. The comparison and design guidance help engineers determine whether the MAX118EAI+ fits a specific acquisition architecture, interface voltage requirement, channel count, and standby-power budget.
Pilihan pengganti yang segera untuk MAX118EAI+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX118EAI+ (sama faktor bentuk dan kaki) — berbeza dalam Conversion Time, Package, Power-Down Current, Power-Down Recovery Time, Resolution.
MAX118EAI+T
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX118CAI+
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX118EAI
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX118EAI+ Penilaian maksimum & Ciri-ciri Elektrik
| ADC Type | Flash ADC |
| Pemecahkatan | 8 bit |
| Number of Input Channels | 8 channels |
| Input Type | Single-ended |
| Conversion Rate | 1Msps |
| Conversion Time | 660ns |
| Tegangan Pemberi Arus | +5V |
| Power-Down Current | Typically 1µA |
| Power-Down Recovery Time | Less than 200ns |
| Antaramuka | Parallel |
| Reference Type | External |
| Architecture | Half-flash |
| Kemasan | 28-SSOP |
| Number of Terminals | 28 |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Package Shape | Rectangular |
Panduan Konfigurasi Pin MAX118EAI+ rectangular
Konfigurasi pin untuk MAX118EAI+ (rectangular pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk MAX118EAI+.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX118EAI+ patut untuk 6 aplikasis: Industrial Multichannel Sensor Acquisition, Microcontroller Data Acquisition, Low-Power Intermittent Measurement, Process Control and Automation, Laboratory and Instrumentation, Position and Feedback Measurement.
Industrial Multichannel Sensor Acquisition
The MAX118EAI+ fits industrial monitoring boards that must scan eight analog sensor channels at up to 1Msps. Its eight single-ended inputs eliminate the need for eight separate converter packages, while the 660ns half-flash conversion time provides a practical basis for high-speed sampling. Place each sensor path close to the converter, maintain a continuous return plane, and decouple the +5V supply near the device. The parallel interface requires enough board area for eight data lines and careful separation between switching digital outputs and low-level analog inputs.
Disebarkan
Microcontroller Data Acquisition
MAX118EAI+ is appropriate when a microcontroller needs fast acquisition through a parallel bus rather than a serial ADC. The 8-bit resolution supports coarse measurements such as position, potentiometer angle, and discrete analog thresholds, while the 1Msps throughput can capture rapidly changing waveforms. The processor or FPGA must be able to capture the parallel output without timing conflicts. Confirm logic-level compatibility, add isolation or level translation when necessary, and route the eight data outputs away from sensitive input traces to reduce conversion-edge coupling.
Disebarkan
Low-Power Intermittent Measurement
The MAX118EAI+ supports battery-operated or intermittently powered measurement systems because its active-low power-down mode typically reduces current to 1µA and recovery takes less than 200ns. A controller can keep the converter disabled between measurement bursts, enable it, capture one or more conversions, and return it to power-down without a long startup delay. The external reference and input circuitry must also be controlled for accurate low-power readings, especially if leakage or reference shutdown introduces additional error during the measurement interval.
Disebarkan
Process Control and Automation
The MAX118EAI+ can monitor several process variables in an automation controller, including pressure, temperature, flow-sensor outputs, and resistive sensor bridges conditioned into the 0-to-5V input range. Eight channels permit periodic updates from multiple sensing points while the half-flash converter reaches a 1Msps sampling rate. For closed-loop control, evaluate the total acquisition latency, input settling time, reference accuracy, and digital bus access. Keep analog conditioning close to the ADC and use a solid ground reference to obtain repeatable conversion results.
Disebarkan
Laboratory and Instrumentation
MAX118EAI+ is useful in compact laboratory instruments that sample several analog channels and require a straightforward parallel readout. Its eight-bit resolution is suitable for basic meter, waveform, and calibration functions where high precision is not essential. The +5V analog supply and external reference allow reference selection to match the measurement range, while the 28-SSOP package supports conventional surface-mount assembly. For bench accuracy, evaluate offset, gain, and reference stability according to the manufacturer’s test conditions before treating an 8-bit code as a precision measurement.
Disebarkan
Position and Feedback Measurement
The MAX118EAI+ can acquire output from potentiometers, angular position sensors, and other analog feedback elements when an 8-bit measurement is sufficient. Eight channels allow several axes or redundant feedback signals to be sampled with one converter, reducing component count and simplifying synchronization. The 1Msps throughput provides ample margin for many position-control loops, although the complete signal path determines practical accuracy. Verify input range, settling behavior, connector protection, and the update time required by the motion-control loop.
Disebarkan
Data referensi kejuruteraan untuk MAX118EAI+ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX118EAI+T | MAX118CAI+ | MAX118EAI |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-SSOP | 28-SSOP - same | 28-SSOP - same | 28-SSOP - same |
| Resolution | 8 bit | 8 bit | 8 bit | 8 bit |
| Input Channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Conversion Rate | 1Msps | 1Msps | 1Msps | 1Msps |
| Supply Voltage | +5V | +5V | +5V | +5V |
| Interface | Parallel | Parallel | Parallel | Parallel |
| Architecture | Half-flash | Half-flash | Half-flash | Half-flash |
| Reference Type | External | External | External | External |
| Power-Down Current | Typically 1µA | Typically 1µA | Typically 1µA | Typically 1µA |
Penyeberangsung Jelas
- Eight input channels in one converter (vsMAX1112EAP+)
- Direct parallel readout (vsMAX1112EAP+)
- Fast half-flash conversion (vsMAX1112EAP+)
Catatan Desain
Route the eight analog inputs as short, quiet traces over a continuous ground plane, and place the input-conditioning components close to the MAX118EAI+ rather than near the signal source. A long unprotected input path increases susceptibility to crosstalk and pickup. Keep the parallel data outputs on the opposite side of the package where practical, and avoid routing them beneath analog inputs or the external reference connection.
Use a low-impedance external reference and decouple the +5V supply near the device. Reference noise appears directly in the conversion result, while supply disturbance can affect the ADC’s internal reference and comparator behavior. Verify the reference voltage and input range against the manufacturer’s electrical characteristics, and ensure that the source impedance and sample-and-hold settling time are compatible with the 660ns conversion interval.
Do not treat the 8-bit resolution as 256 exact physical levels unless the analog front end and reference are designed appropriately. Offset, gain error, input noise, reference drift, and source impedance can consume several codes. Use the manufacturer’s timing and accuracy information to establish the usable measurement range, and validate each analog channel rather than calibrating only one representative input.
Because the 28-SSOP device exposes a parallel interface, plan the PCB layer flow so the eight data lines reach the processor or FPGA without unnecessary stubs. Maintain a continuous return path beneath signal routes, use appropriate input protection and source impedance, and keep the power-down and conversion-control traces away from high-current switching nodes. Confirm pin orientation against the manufacturer package drawing before releasing artwork.
Maklumat Kesediaan
The product is an industrial-temperature analog-to-digital converter. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer documentation or declaration for the exact order code.