Analog Devices

MAX232ACUE+ - 120kbps Dual RS-232 Transceiver | Analog Devices

MPN: MAX232ACUE+ ✓ Aktif
4.5 V to 5.5 V Vdss TSSOP-16 Package
MOQ: 1 |

MAX232ACUE+ Ringkasan

The Analog Devices MAX232ACUE+ is a +5 V-powered dual RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 16-pin TSSOP package. Its 4.5 V to 5.5 V single-supply operation suits equipment that cannot provide the traditional ±12 V RS-232 interface voltage. The integrated charge-pump circuitry provides the bipolar voltage levels required by RS-232 while the host-side logic operates from a single 5 V rail.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into logic. Within the interface hierarchy, the MAX232 belongs to the RS-232 driver/receiver family, then to the broader transceiver category and ultimately to interface ICs. This device combines two transmit channels with two receive channels, making it suitable for bidirectional point-to-point serial links, console connections, and industrial control equipment.

The MAX232ACUE+ supports 120 kbps signaling and uses a 4.5 V to 5.5 V supply. According to the manufacturer product page, the MAX232 family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces where ±12 V is unavailable. The commercial MAX232ACUE+ ordering option is specified for 0 °C to +70 °C operation and is supplied in a gull-wing TSSOP-16 surface-mount package.

Each transmit channel converts one TTL/CMOS-compatible input into a bipolar RS-232 output, while each receive channel converts an RS-232 input into a logic-level output. The MAX232 family includes on-chip charge-pump capacitors and driver circuitry, reducing the external component count compared with discrete RS-232 implementations. Exact propagation delay, receiver threshold, output protection, and charge-pump operating-current details should be confirmed in the manufacturer datasheet for the selected ordering option.

Typical uses include serial console links, point-to-point data acquisition, test equipment, industrial controllers, and embedded systems communicating with legacy RS-232 devices. For short or low-noise industrial links, the 120 kbps rate provides more than enough margin for many legacy protocols. Longer cables, high common-mode noise, and electrically long interconnects require careful grounding, shielding, and protection planning.

Place the MAX232ACUE+ close to the connector or transceiver boundary so the protected RS-232 lines do not run through sensitive digital circuitry. Route ground and signal conductors together where practical, use suitable protection against surge and ESD events, and check that downstream logic levels match the device's input thresholds. The 16-pin TSSOP footprint also requires standard fine-pitch assembly clearance around adjacent components.

This product page combines the manufacturer's device information with distributor specifications, replacement cross-references, and practical PCB guidance. It also distinguishes verified device attributes from parameters that require datasheet confirmation, helping engineers evaluate the MAX232ACUE+ and its compatible alternatives more efficiently.

Pilihan pengganti yang segera untuk MAX232ACUE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MAX232ACUE+ (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Interface Standard, Number of Drivers, Number of Receivers.

Maxim Integrated
Package: 16-pin PDIP
Mounting Type: Through-hole
Bandingkan Dengan MAX232ACUE+ →
Analog Devices
Package: 16-pin TSSOP
Interface Standard: Full RS-232
Number of Drivers: 2 drivers
Bandingkan Dengan MAX232ACUE+ →

MAX232AEUE+

✅ Masuk Drop-In
Analog Devices
📦 TSSOP-16
RS-232 transceiver · 2 drivers · 2 receivers · Full RS-232 · 4.5 V to 5.5 V · +5 V · 16-pin TSSOP · 16 pins

Hubungi untuk harga

Lihat Datasheet →

MAX232ACUE+ Spesifikasi

Product Type Dual RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 120 kbps
Supply Voltage Range 4.5 V to 5.5 V
Power Supply Type Single +5 V
Interface Standard EIA/TIA-232E and V.28/V.24
Gambaran Suhu Operasi 0 °C to +70 °C
Kemasan TSSOP-16
Bilangan Pin 16
Terminal Form Gull wing
Jenis Pemasangan Surface mount
Package Shape Rectangular

Konfigurasi Pin MAX232ACUE+

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Pin 1 R1OUT — Receiver 1 output
Pin 2 R2OUT — Receiver 2 output
Pin 3 R3OUT — Receiver 3 output
Pin 4 R4OUT — Receiver 4 output
Pin 5 T1IN — Transmitter 1 input
Pin 6 T2IN — Transmitter 2 input
Pin 7 T3IN — Transmitter 3 input
Pin 8 T4IN — Transmitter 4 input
Pin 9 T1OUT — Transmitter 1 output
Pin 10 T2OUT — Transmitter 2 output
Pin 11 T3OUT — Transmitter 3 output
Pin 12 T4OUT — Transmitter 4 output
Pin 13 R1IN — Receiver 1 input
Pin 14 R2IN — Receiver 2 input
Pin 15 R3IN — Receiver 3 input
Pin 16 R4IN — Receiver 4 input

Aplikasi Biasa

MAX232ACUE+ patut untuk 6 aplikasis: Serial Console Interface, Point-to-Point Data Acquisition, Embedded Controller Communication, Industrial Control Communication, Test and Measurement Equipment, Legacy Equipment Retrofit.

🔧

Serial Console Interface

The MAX232ACUE+ is well suited to a point-to-point serial console because it provides two transmit channels, two receive channels, and operation from a 4.5 V to 5.5 V supply without an external ±12 V rail. Its 120 kbps maximum data rate is substantially faster than many legacy console formats, while the 16-pin TSSOP package keeps the interface compact. Place the transceiver between the logic connector and the RS-232 connector, connect its logic-side pins to the host UART, and route the bipolar receive and transmit lines through the protection network. For exposed industrial consoles, add suitable transient suppression and use shielded cabling because the commercial 0 °C to +70 °C temperature option does not cover extended-temperature installations.

📡

Point-to-Point Data Acquisition

A MAX232ACUE+ interface can connect a data-acquisition controller or instrument to a legacy computer through a two-wire serial link. The integrated charge-pump architecture allows the host electronics to operate from a single 5 V supply while the cable side uses RS-232 levels. Its 120 kbps capability accommodates many legacy measurement protocols, although protocol overhead will reduce effective payload throughput. Keep the transceiver close to the DB9 or equivalent connector, terminate unused receiver inputs according to the manufacturer guidance, and protect each exposed line against electrostatic discharge. Verify the receiver threshold and cable length for the actual ground-reference conditions before committing the interface to production.

🧩

Embedded Controller Communication

The MAX232ACUE+ can provide a compact voltage-level bridge between an embedded controller UART and a conventional RS-232 peer. Two drivers and two receivers allow simultaneous command and response paths without requiring another transceiver, while the 16-pin TSSOP footprint simplifies routing on space-constrained controller boards. The 4.5 V to 5.5 V supply range aligns with many +5 V embedded systems, but the logic thresholds must be checked against the host. Place input and output bypass capacitors close to the device, maintain a continuous return path between the two systems, and use external protection when the connector is accessible to cables or users.

🏭

Industrial Control Communication

The MAX232ACUE+ can bridge a controller and an industrial RS-232 device when the installation stays within a 0 °C to +70 °C ambient environment and the cable is appropriately protected. Its 120 kbps limit is suitable for numerous supervisory-control protocols that exchange commands rather than continuous high-bandwidth data. Industrial implementation should emphasize surge and ESD protection, common-mode grounding, and separation between protected line drivers and sensitive logic. Use the two receiver channels for status or diagnostic signals and the two transmitter channels for command paths. If the equipment must operate outside the commercial temperature range or in a particularly noisy installation, specify an extended-temperature and suitably protected RS-232 interface instead.

🔧

Test and Measurement Equipment

The MAX232ACUE+ is useful in test and measurement equipment that must exchange commands and results with a host computer through an RS-232 connection. The dual-channel arrangement can support separate command and response paths, while the single +5 V supply requirement reduces power-system complexity. The transceiver's 120 kbps maximum rate is more than adequate for many instrument-control protocols, but the instrument firmware must match the host baud rate and framing settings. Locate the IC near the external connector, provide low-impedance supply bypass, and include configurable line protection so repeated cable insertion does not expose the interface to uncontrolled electrostatic discharge.

🖥️

Legacy Equipment Retrofit

The MAX232ACUE+ enables a modern controller to communicate with legacy equipment that exposes only a conventional RS-232 port. Because the MAX232 family generates the required bipolar line levels from a 4.5 V to 5.5 V supply, the retrofit does not require a separate ±12 V rail. The 120 kbps capability covers many legacy control protocols, but older systems may use nonstandard handshaking or electrical assumptions, so both ends of the link should be tested together. Retain the original connector pinout and grounding arrangement where possible, add protection at the connector, and verify that the connected equipment can tolerate modern RS-232 driver levels.

What are the key specifications of MAX232ACUE+ that engineers should know?
The MAX232ACUE+ is a +5 V-powered, dual RS-232 transceiver with two drivers, two receivers, a 120 kbps maximum data rate, and a 16-pin TSSOP package. According to the Analog Devices MAX232 product page, the MAX232 family supports EIA/TIA-232E and V.28/V.24 interfaces when ±12 V is unavailable. The specified supply range is 4.5 V to 5.5 V, and the commercial ordering option operates from 0 °C to +70 °C. These characteristics make it appropriate for compact point-to-point serial interfaces, although cable length, ESD protection, and receiver thresholds should be checked against the system requirements.
What is the operating voltage of MAX232ACUE+?
The MAX232ACUE+ operates from a 4.5 V to 5.5 V single supply. According to the manufacturer MAX232 product information, the family is designed to generate the bipolar RS-232 interface levels internally when a ±12 V supply is unavailable. The 5 V host-side supply simplifies system integration, but the RS-232 connector side remains bipolar. Supply decoupling and trace current should be evaluated under the worst-case charge-pump and driver activity described in the manufacturer datasheet.
How fast can MAX232ACUE+ transmit RS-232 data?
The MAX232ACUE+ supports a maximum RS-232 data rate of 120 kbps. The distributor technical listing identifies the MAX232ACUE as a two-driver, two-receiver RS-232 interface operating at 120 kbps. Actual application throughput can be lower because framing, parity, acknowledgments, and protocol overhead consume part of the available transmission time. Cable capacitance, receiver load, and the selected protocol must also be included when establishing a reliable maximum operating rate.
Where can I download the MAX232ACUE+ datasheet PDF?
The official MAX232ACUE+ technical information is available through the Analog Devices MAX232 product page at https://www.analog.com/en/products/MAX232.html. The manufacturer product page links the current MAX232 data sheet, ordering information, and family documentation. Use the ordering table to confirm the MAX232ACUE+ commercial-temperature and TSSOP-16 identifiers, and use the package pin description when assigning PCB tracks or checking connector-side signal assignments.
Where can I find the MAX232ACUE+ pinout?
The MAX232ACUE+ pinout is found in the pin-description table of the Analog Devices MAX232 family data sheet linked from the official product page. The device uses a 16-pin TSSOP package with four receiver outputs, four transmitter inputs, four transmitter outputs, and four receiver inputs. Use the manufacturer pin-description table when assigning tracks because connector-side receiver and transmitter signals must not be interchanged. The standard counter-clockwise package numbering applies to the gull-wing TSSOP footprint.
Is MAX232ACUE+ suitable for an industrial serial console?
The MAX232ACUE+ can suit a short, point-to-point industrial serial console when the link operates within its 120 kbps capability and 0 °C to +70 °C commercial-temperature range. It provides two transmit and two receive channels from a 4.5 V to 5.5 V supply. For harsh industrial environments, use an appropriately rated transient-protection network, robust connector grounding, and a shielded cable. If the enclosure temperature can exceed 70 °C, select an extended-temperature MAX232 ordering option rather than the commercial MAX232ACUE+.
What is the difference between MAX232ACUE+ and MAX232AEUE+?
The MAX232ACUE+ and MAX232AEUE+ are identified as completely replaceable alternatives with consistent terminals and packages in the published comparison. Both are 16-pin TSSOP RS-232 transceivers, so the distinction is not a PCB footprint change. Their ordering codes indicate different temperature grades within the MAX232 family, but the exact limits and qualification details should be checked in the manufacturer ordering table before substituting one for the other. Confirm the required ambient range and any compliance obligations for the finished equipment.
When should I choose MAX232ACUE+ over MAX232AEUE+?
Choose MAX232ACUE+ when the design specifically calls for the commercial-temperature ordering option and requires the MAX232ACUE+ pin-compatible footprint. The MAX232AEUE+ is a closely related TSSOP-16 alternative, but its ordering suffix corresponds to a different temperature grade. Selection should therefore follow the required ambient temperature, qualification, and procurement constraints rather than appearance of the package. Both devices address the same basic dual-channel RS-232 interface function, so software and board compatibility remain central.
What is the best drop-in replacement for MAX232ACUE+?
The MAX232AEUE+ is the closest documented drop-in replacement for the MAX232ACUE+ because both use a 16-pin TSSOP package and the comparison identifies consistent terminals and package characteristics. A true replacement must also satisfy the intended supply voltage, data rate, temperature range, and receiver and driver requirements. Only one non-packaging-variant drop-in candidate was explicitly identified, so do not treat a functional RS-232 transceiver in another package as a board-compatible substitute without redesigning the PCB.
Can MAX232AEUE+ replace MAX232ACUE+ without PCB changes?
Yes, the MAX232AEUE+ can replace the MAX232ACUE+ without PCB changes when its temperature grade and device qualifications satisfy the design requirements. The documented comparison describes the parts as completely replaceable because their terminals and packages are consistent. Verify the ordering table for the exact operating-temperature range before approving the substitution. Also confirm any EMC, automotive, industrial, or customer-specific qualification requirements that may distinguish the two suffixes.
Where can I buy MAX232ACUE+ online and check its current availability?
Use the Request a Quote form on this page to request the current price, stock status, lead time, and order quantity for the MAX232ACUE+. The form provides a direct response for this exact 16-pin TSSOP ordering option. Engineers should specify whether reels, cut tape, or another shipment format is required and state the expected annual and prototype quantities so the supplier can confirm the correct packaging and delivery plan.
What is the price of MAX232ACUE+?
The current price for the MAX232ACUE+ should be requested through the Request a Quote form on this page because pricing and availability can change with quantity, shipment method, and component condition. Submit the required quantity and packaging preference to receive a current quotation for the exact MAX232ACUE+ ordering option. For design budgeting, compare the resulting quote with the cost of any qualified pin-compatible alternative on the same page.
What is the lead time and stock status of MAX232ACUE+?
Request the current MAX232ACUE+ lead time and stock status through the Request a Quote form on this page. Include prototype or production quantity, reel or cut-tape preference, target delivery date, and any required traceability information. A build plan should not rely on a generic family-level stock statement because the exact suffix and commercial-temperature ordering option must be allocated to the order.
Is MAX232ACUE+ still in production?
The Analog Devices product page identifies the MAX232 family as production, and the manufacturer presents an ordering table containing multiple package and temperature options. The MAX232ACUE+ is consequently treated as an active catalog part. Engineers should still verify lifecycle status for the exact suffix at the time of procurement because product-family status and individual ordering-code status can change. Use the Request a Quote form to confirm supply for the required quantity and packaging format.
What RS-232 standards are supported by MAX232ACUE+?
The MAX232ACUE+ supports the EIA/TIA-232E and V.28/V.24 communications interfaces identified for the MAX232 family by Analog Devices. According to the manufacturer family datasheet excerpt, the devices are particularly intended for interfaces where ±12 V is not available. Compliance with a communications interface supports signal compatibility, but the complete system still depends on correct termination, grounding, protection, and cable behavior. Verify driver levels, receiver thresholds, and timing against the applicable protocol.

Data referensi kejuruteraan untuk MAX232ACUE+ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MAX232ACUE+ when the design needs a compact, two-channel RS-232 interface operating from a 4.5 V to 5.5 V supply, with a maximum rate of 120 kbps and a commercial ambient range of 0 °C to +70 °C. It is especially suitable for point-to-point console, data-acquisition, test-equipment, embedded-controller, and legacy-equipment links using conventional RS-232 connectors. The MAX232AEUE+ is the closest documented alternative because it uses the same TSSOP-16 footprint and preserves terminal and package compatibility; prefer it only after confirming its exact temperature grade and qualification requirements. Other MAX232 and RS-232 transceivers with different pin counts, packages, channel counts, or data rates should not be treated as drop-in replacements without PCB changes and signal reassignment. For installations above 70 °C, severe conducted noise, long unshielded cables, or exposed connector inputs, choose an extended-temperature device and add appropriate surge and ESD protection.

Perbandingan dengan Gantian

Parametr Produk Ini MAX232AEUE+
Brand Analog Devices Maxim Integrated
Package TSSOP-16 TSSOP-16 - same package
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers
Maximum Data Rate 120 kbps 120 kbps
Supply Voltage 4.5 V to 5.5 V 4.5 V to 5.5 V
Power Supply Type Single +5 V Single +5 V
Pin Compatibility 16-pin TSSOP reference configuration Pin-compatible with no package modification
Interface Standard EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24
Mounting Type Surface mount Surface mount

Penyeberangsung Jelas

  • Exact package-level replacement path (vsMAX232AEUE+)
  • Dual-channel integration (vsMAX232AEUE+)
  • Single-supply RS-232 implementation (vsMAX232AEUE+)

Catatan Desain

Place the MAX232ACUE+ close to the RS-232 connector and route the bipolar line-side nets directly to the protection components. Keep logic-side UART traces on the opposite side of the device and away from external cables. The manufacturer pin-description table should be used for final track assignment because the exposed receiver and transmitter pins serve different sides of the interface.

Do not assume that the 4.5 V to 5.5 V host supply is also the RS-232 connector-side voltage. The MAX232 family creates bipolar RS-232 levels internally, while the device itself remains a single-supply IC. Confirm ground reference, connector pinout, and driver polarity before connecting two systems. Also verify that the commercial MAX232ACUE+ temperature limit of 0 °C to +70 °C covers the enclosure's worst-case internal temperature.

RS-232 links can pick up both conducted and radiated noise, especially when cable lengths increase. Use a continuous signal-ground reference, route the cable-side ground close to the corresponding line conductors, and apply connector-side transient protection. Keep switching regulators and high-current digital return paths away from the receiver input area, and validate the completed interface with the intended cable and worst-case ground offset.

Place all required bypass capacitors directly beside the supply and ground pins, with the shortest possible return path to the device. The charge-pump and switching-regulator section can create supply ripple even though the part provides a clean-looking RS-232 interface at the connector. Follow the manufacturer capacitor values and recommended layout, and keep the analog and logic-side ground connections consistent with the selected datasheet implementation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance details for the exact MAX232ACUE+ ordering option were not stated on the manufacturer product page or distributor snippets. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with the manufacturer before qualification.

Data disahkan pada: 2026-11-17 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MAX232ACUE+ datasheet MAX232ACUE+ pinout MAX232ACUE+ datasheet pdf MAX232ACUE+ equivalent MAX232ACUE+ replacement MAX232ACUE+ cross reference MAX232ACUE+ vs MAX232AEUE+ MAX232ACUE+ price MAX232ACUE+ stock Analog Devices MAX232ACUE+ MAX232ACUE+ TSSOP-16 MAX232ACUE+ 120kbps RS-232

Komponen dan Tanda berkaitan

Analog Devices Maxim Integrated MAX232ACUE+ MAX232AEUE+ RS-232 EIA/TIA-232E V.28 V.24 RS-232 transceiver line driver line receiver interface IC semiconductor TSSOP-16 TSSOP family surface mount SMD 4.5 V to 5.5 V power supply 120 kbps data rate charge-pump circuit bipolar RS-232 levels serial console data acquisition industrial control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ