MAX3387ECUG+T - 250kbps RS-232 Interface | Analog Devices
MPN: MAX3387ECUG+T ✓ AktifMAX3387ECUG+T Ringkasan
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 bipolar levels and converts received RS-232 levels back into CMOS-compatible logic. The RS-232 interface belongs to the communications-interface hierarchy, where it bridges portable equipment, industrial controllers, point-of-sale terminals, and other data links that require the electrical characteristics defined by EIA/TIA-232 and V.28/V.24. The MAX3387ECUG+T combines three transmitters and three receivers in one device, reducing board area in multi-port RS-232 equipment.
Key features include a maximum data rate of 250 kbps, operation from a 3 V to 5.5 V supply, and ±15 kV ESD protection. The low-dropout transmitter output stage supports true RS-232 operation from a +5.5 V supply, while the dual charge pump generates the bipolar voltage required for compliant signal levels. A low-power design makes the interface appropriate for battery-operated products, including personal digital assistants and cellular phones.
The device integrates three independent transmit channels and three independent receive channels, allowing one package to terminate a multi-drop or multi-port RS-232 connection. Its 250 kbps capability exceeds the speed needed by many legacy serial peripherals and supports communication links requiring more throughput than conventional low-speed RS-232 ports. The internal charge-pump arrangement reduces the external support circuitry to four small 0.1 µF capacitors.
Typical applications include RS-232 links in personal digital assistants, mobile and cellular phones, portable test equipment, point-of-sale systems, industrial control panels, and embedded serial-port interfaces. The combination of three transmitters, three receivers, 3 V operation, and enhanced ESD protection is particularly useful where several serial endpoints share a compact circuit board.
When laying out the design, place the four 0.1 µF charge-pump capacitors close to their specified pins, keep the RS-232 connector and signal traces physically separated from sensitive logic, and provide an appropriate return path for the bipolar interface. Confirm the logic levels, supply range, and shutdown behavior in the manufacturer datasheet before finalizing a new board.
This page consolidates the MAX3387ECUG+T interface specifications, verified drop-in candidate, application guidance, and design notes into an engineering-focused reference that supports component selection, schematic review, and PCB planning beyond a basic distributor listing.
Pilihan pengganti yang segera untuk MAX3387ECUG+T — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX3387ECUG+T (sama faktor bentuk dan kaki) — berbeza dalam ESD Protection.
MAX3387EEUG+T
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX3387ECUG+T Spesifikasi
| Product Type | 3/3 RS-232 transceiver |
| Number of Transmitters | 3 |
| Number of Receivers | 3 |
| Supply Voltage Range | 3 V to 5.5 V |
| Nominal Supply Voltage | 3 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| Charge-Pump Architecture | Dual charge pump |
| Required Charge-Pump Capacitors | 4 × 0.1 µF |
| Kemasan | 24-pin TSSOP |
| Jenis Pemasangan | Surface mount |
| Shutdown Function | AutoShutdown Plus |
Panduan Konfigurasi Pin MAX3387ECUG+T 24-pin tssop
Konfigurasi pin untuk MAX3387ECUG+T (24-pin tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX3387ECUG+T.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX3387ECUG+T patut untuk 6 aplikasis: Portable Data Terminals, Cellular Phone Accessories, Industrial Control Panels, Point-of-Sale Terminals, Portable Test and Measurement, Embedded Serial Port Interfaces.
Portable Data Terminals
The MAX3387ECUG+T fits portable data terminals because it operates from a 3 V to 5.5 V supply and combines three transmitters with three receivers in one 24-pin TSSOP package. The MAX3387E datasheet identifies PDAs as a target application. Its ±15 kV ESD protection adds useful protection for equipment exposed to connector contact, while the 250 kbps rate supports legacy serial links without requiring a higher-voltage RS-232 supply. A compact design can use the four required 0.1 µF charge-pump capacitors and place the interface close to its connector.
Disebarkan
Cellular Phone Accessories
The MAX3387ECUG+T is suitable for cellular phone accessories and portable communications equipment requiring a low-voltage RS-232 interface. Its 3 V operation aligns with compact systems, and the ±15 kV ESD protection is valuable when an external serial cable can introduce electrostatic discharge. Three transmitters and three receivers provide multiple channels without requiring three separate transceiver packages. The MAX3387E datasheet specifically identifies cellular phones as an application, and the 250 kbps maximum rate covers established RS-232 peripherals.
Disebarkan
Industrial Control Panels
The MAX3387ECUG+T can support RS-232 connections in industrial control panels that require several serial channels on a constrained board. Three integrated transmitters and receivers reduce component count, while the 24-pin TSSOP package supports compact surface-mount layouts. The 250 kbps rate accommodates common control and configuration links. Use the ±15 kV ESD rating as one layer of interface protection, but retain connector grounding and appropriate industrial cable practices. Four 0.1 µF charge-pump capacitors are required.
Disebarkan
Point-of-Sale Terminals
The MAX3387ECUG+T fits point-of-sale terminals that need more than one legacy RS-232 channel for peripherals. Its three transmitters and three receivers allow several device connections to share one interface IC, while operation from a 3 V to 5.5 V supply supports embedded terminal architectures. The 250 kbps maximum rate is suitable for conventional peripheral traffic. Place the four charge-pump capacitors close to the device, route driver and receiver traces away from noisy switching nodes, and use the manufacturer application layout as the basis for the PCB.
Disebarkan
Portable Test and Measurement
The MAX3387ECUG+T is useful in portable test and measurement equipment that must exchange data with legacy RS-232 instruments. The combination of a 3 V supply requirement, 250 kbps operation, and three transmit and receive channels allows a compact instrument to support several service ports. Enhanced ±15 kV ESD protection is particularly relevant where users connect external test leads. The 24-pin TSSOP package limits board area, although the four 0.1 µF charge-pump capacitors and exposed cable routing still require careful layout planning.
Disebarkan
Embedded Serial Port Interfaces
The MAX3387ECUG+T is appropriate for embedded equipment that must bridge modern CMOS logic to legacy RS-232 equipment. Its three transmitters and three receivers provide multiple point-to-point links, while the dual charge pump supplies the bipolar levels required for compliant RS-232 communication from a 3 V supply. The 250 kbps capability supports established control and diagnostic protocols. Keep the charge-pump loop compact, observe the four 0.1 µF capacitor requirements, and provide a continuous return path to the RS-232 connector.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX3387ECUG+T — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX3387EEUG+T |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-TSSOP | 24-TSSOP - same |
| Device Type | 3/3 RS-232 transceiver | 3/3 RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
Penyeberangsung Jelas
- Combines three transmitters and three receivers in one package (vsMAX3387EEUG+T)
- Operates directly from low-voltage portable-system supplies (vsMAX3387EEUG+T)
- Supports communication rates up to 250 kbps (vsMAX3387EEUG+T)
- Adds enhanced ESD protection for connector-exposed portable equipment (vsMAX3387EEUG+T)
Catatan Desain
Place the four 0.1 µF charge-pump capacitors close to the corresponding MAX3387ECUG+T pins, using the capacitor placement shown in the Analog Devices MAX3387E application circuit. Keep the charge-pump loop compact and follow the ground-return arrangement in the manufacturer layout. Do not substitute bulkier capacitor positions simply to match a generic component arrangement, because long loop area can increase switching noise and radiated emissions.
Separate RS-232 driver traces from sensitive receiver and logic traces where practical, especially around switching regulators and clocks. Route the RS-232 return path continuously to the connector reference ground and avoid sharing narrow return segments with high-current digital or power paths. For a 250 kbps design, preserve a controlled ground reference and avoid introducing long stubs from the connector or protection components.
Do not treat ±15 kV ESD protection as a substitute for external connector protection or chassis grounding. Verify the final pin assignments and charge-pump connections in the Analog Devices MAX3387E datasheet, and account for the 3 V to 5.5 V supply range during power sequencing. A conventional ±12 V RS-232 cable interface may also require board-level protection and grounding decisions beyond the IC itself.
Treat each transmitter and receiver channel as a separate RS-232 port when assigning connector signals. Do not combine outputs unless the application explicitly uses an RS-232 multidrop topology and the voltage, impedance, and driver behavior have been evaluated. Receiver inputs can also pick up noise on long cables, so use the datasheet receiver thresholds and connector layout to define reliable signal margins.
Maklumat Kesediaan
The manufacturer product page identifies the MAX3387E as an enhanced-ESD communications interface, but the retrieved material does not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.