MC145483EJ - 13-Bit PCM Codec Filter Interface | NXP
MPN: MC145483EJ ✓ AktifMC145483EJ Ringkasan
A PCM codec-filter is an interface IC that converts analog audio into digital PCM samples and reconstructs analog audio from digital PCM data. In the signal-chain hierarchy, the MC145483EJ belongs to the codec family within audio interface ICs, which sit between analog transducers and digital audio processors. Its integrated filtering reduces the number of separate components required in compact telephony, voice-capture, and audio-recording designs.
Key characteristics include 13-bit resolution, one ADC channel, one DAC channel, 2s-complement PCM data, operation from a 3 V supply, and a 20-pin TSSOP package. The manufacturer documentation also identifies SOG, SSOP, and 32-pin QFN package options for the same codec-filter family. This availability in several package styles makes the MC145483EJ relevant to designs requiring different board-area or assembly constraints.
The device is intended for linear PCM audio-interface applications where a compact mixed-signal codec is more appropriate than a general-purpose high-resolution audio converter. Its 13-bit data width places it in the voice and speech-capture class rather than the highest-fidelity music-recording class. Designers should use the pin-description and connection tables in the manufacturer datasheet to connect the analog inputs, analog output, digital PCM interface, clock signals, and supply pins correctly.
Typical uses include digital telephone handsets, voice-recording equipment, speech-processing terminals, industrial voice panels, and compact audio-capture modules. Because the MC145483EJ integrates the codec and filter functions, it can simplify board partitioning when the source signal is a single voice channel and the destination is a parallel PCM processor.
Careful clock and analog-layout planning is essential in a working design. Keep the analog input and output paths short, decouple the supply pins as shown in the manufacturer application guidance, and route digital clock and data lines away from sensitive analog nodes. Confirm the master-clock relationship, data timing, and external filter requirements against the manufacturer datasheet before releasing PCB artwork.
This page combines the exact catalog specifications, package and interface details, application guidance, comparison fields, and engineering notes needed to evaluate the MC145483EJ for a new PCB revision. It also identifies where a separate engineering review is required before substituting a codec with different clocking or filter characteristics.
Pilihan pengganti yang segera untuk MC145483EJ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifMC145483EJ Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | PCM codec-filter |
| Pemecahkatan | 13 bits |
| ADC Channels | 1 channel |
| DAC Channels | 1 channel |
| Data Format | 2s-complement linear PCM |
| Tegangan Pemberi Arus | 3 V |
| Kemasan | 20-pin TSSOP |
| Device Family Package Options | SOG, SSOP, TSSOP, and 32-pin QFN |
| Jenis Pemasangan | Surface mount |
| Audio Interface Type | PCM audio interface |
| Channel Count | 1 audio channel |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Panduan Konfigurasi Pin MC145483EJ sog, ssop, tssop, and 32-pin qfn
Konfigurasi pin untuk MC145483EJ (sog, ssop, tssop, and 32-pin qfn pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MC145483EJ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC145483EJ patut untuk 6 aplikasis: Digital Telephony Voice Interface, Speech-Recording Terminal, Industrial Voice Control Panel, Hands-Free Voice Communication Module, PCM Interface for Microcontroller Systems, Audio Interface for Communication Equipment.
Digital Telephony Voice Interface
The MC145483EJ fits a digital telephone voice path where one analog microphone signal must become linear PCM data and one digital voice stream must return as analog audio. Its single ADC, single DAC, 13-bit resolution, and 2s-complement data format provide a compact conversion block between voice-band analog circuitry and a digital speech processor. A 20-pin TSSOP package also limits board area compared with larger codec packages. During design, confirm the required sample rate, master-clock ratio, bit-clock timing, and analog input bandwidth in the manufacturer datasheet. Add local supply bypassing and keep clock and data routing separated from the microphone and receive-output paths to preserve signal integrity.
Disebarkan
Speech-Recording Terminal
The MC145483EJ can serve as the compact codec-filter stage in a speech-recording terminal that captures a voice-band microphone channel and forwards PCM samples to a processor or storage controller. One ADC channel, one DAC channel, 13-bit linear resolution, and integrated filtering make it appropriate for single-speaker speech capture and monitoring rather than multi-channel studio recording. Place the analog input close to the microphone preamplifier and route the 20-pin TSSOP device near the digital processor to minimize trace length. Verify supported sampling rates and clock ratios against the manufacturer timing diagrams. Use shielded analog routing and a quiet ground plan to prevent codec switching and clock edges from coupling into the voice signal.
Disebarkan
Industrial Voice Control Panel
The MC145483EJ is useful in industrial voice panels that require a single audio channel for operator announcements, intercom traffic, or spoken status messages. Its integrated codec-filter reduces the component count around a voice-band analog front end, while the 20-pin TSSOP package supports compact controller boards. The 13-bit conversion depth is suitable for speech-band information where high-fidelity music reproduction is unnecessary. Use the analog output only with the amplifier and load specified in the manufacturer application guidance, and keep the digital PCM bus short and properly terminated. Confirm supply sequencing, control levels, and clock generation in the manufacturer datasheet before connecting the panel to a higher-voltage industrial bus.
Disebarkan
Hands-Free Voice Communication Module
The MC145483EJ can provide the single-channel audio conversion function in a hands-free communication module with a microphone input and speaker or headset output. One ADC and one DAC cover the basic analog-to-digital and digital-to-analog paths, while 13-bit PCM data is appropriate for narrowband voice processing. The 20-pin TSSOP package allows the codec to sit between an analog amplifier stage and a digital baseband or application processor. Avoid adding unverified digital audio processing inside this codec; the MC145483EJ is a PCM codec-filter. Validate microphone gain, receive-path attenuation, clocking, and supported sample rates using the manufacturer datasheet. Place analog decoupling at the supply pins and route the master clock away from the microphone input.
Disebarkan
PCM Interface for Microcontroller Systems
The MC145483EJ suits a microcontroller-based audio subsystem that needs a parallel PCM codec at its periphery. The 13-bit resolution and 2s-complement data format allow the host processor to handle voice samples digitally while the codec performs analog capture and playback. The 20-pin TSSOP package is easy to route on a mixed-signal board, but digital timing is critical: the processor must generate the master clock and bit clock required by the codec, and the frame format must match the software decoder. Use the manufacturer timing diagrams to establish setup and hold requirements. Keep the data bus away from analog input and output nodes, provide uninterrupted supply bypassing, and validate the interface with a known PCM test pattern during bring-up.
Disebarkan
Audio Interface for Communication Equipment
The MC145483EJ can form the voice-audio conversion block in compact communication equipment that links analog speech circuits to a digital modem, DSP, or network controller. Its single-channel architecture matches designs with one transmit and one receive audio path, and the 13-bit linear PCM representation is suitable for voice-band processing. The 20-pin TSSOP package supports space-constrained boards, while integrated filtering can reduce the need for separate filter stages. Select the supply and external component arrangement shown in the manufacturer application circuit, and do not substitute an arbitrary anti-aliasing network without checking the internal filter response. Validate full-scale levels, input impedance, clock ratios, and frame timing before production release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MC145483EJ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-pin TSSOP |
| Product Type | PCM codec-filter |
| Resolution | 13 bits |
| ADC Channels | 1 channel |
| DAC Channels | 1 channel |
| Data Format | 2s-complement linear PCM |
| Supply Voltage | 3 V |
| Audio Interface | PCM audio interface |
| Mounting Type | Surface mount |
Penyeberangsung Jelas
- Combines single-channel conversion and filtering in one compact device (vsMC145483EJ)
- Uses a space-efficient 20-pin surface-mount package (vsMC145483EJ)
- Targets the linear PCM interface expected by digital voice processors (vsMC145483EJ)
Catatan Desain
Keep the analog input, analog output, and their supporting components close to the MC145483EJ while separating the parallel PCM, clock, and control traces from those nodes. Route the master clock and bit clock away from the microphone or receive input to avoid coupling clock edges into the 13-bit conversion channel. Use a continuous ground plane under the device and follow the manufacturer application layout for component placement and supply bypassing.
Follow the manufacturer power connection and decoupling arrangement rather than relying on a single general-purpose bypass capacitor. Place the closest capacitor directly across the relevant supply pins with a short ground return. Before applying power, confirm the analog and digital supply levels, sequencing requirements, and control-pin states in the MC145483EJ manufacturer datasheet. Incorrect sequencing or an unsatisfied digital rail can prevent deterministic codec operation.
Do not assume that a 20-pin codec with similar resolution is automatically a drop-in replacement. Validate master-clock ratio, PCM frame width, bit order, sign-bit interpretation, analog filter response, control levels, and every package pin. The MC145483EJ uses 2s-complement linear PCM data, so a candidate using unsigned data or a different frame structure requires interface software and possibly schematic changes.
Maklumat Kesediaan
Compliance declarations were not included in the manufacturer or distributor information for MC145483EJ. The device is an integrated circuit for audio interfaces and is not presented as an AEC-Q100 automotive-qualified product.