Microchip Technology

MCP6043-I/MS - 1.6V 14kHz Rail-to-Rail Op Amp | Microchip

MPN: MCP6043-I/MS ✓ Aktif
1.6 V Vdss Less than 1.0 uA per amplifier Id 8-pin MSOP Package
MOQ: 1 |

MCP6043-I/MS Ringkasan

The Microchip Technology MCP6043-I/MS is a single operational amplifier with rail-to-rail input and output operation, a 1.6 V minimum supply, and a gain-bandwidth product of approximately 14 kHz, packaged in an 8-pin MSOP. It is designed for low-power signal conditioning, sensor interfaces, and portable equipment where a compact amplifier and low quiescent current are important. The MCP6043 family also includes an amplifier with chip select, allowing the device to be placed into a low-power state when the signal path is not active.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify or buffer voltage signals. The MCP6043 belongs to the operational amplifier hierarchy within analog and mixed-signal semiconductors. Its rail-to-rail input stage supports signals close to the negative and positive supply rails, while rail-to-rail output capability improves usable output swing in low-voltage systems. These characteristics make the device suitable for battery-powered instrumentation and portable products operating from a low single supply.

The MCP6043-I/MS operates with a supply as low as 1.6 V, with the manufacturer describing the family as operating down to 1.4 V. Its listed gain-bandwidth product is approximately 14 kHz, and one distributor specification lists a 0.003 V/us slew rate. The device draws less than 1.0 uA quiescent current per amplifier according to the manufacturer product page. Rail-to-rail input and output behavior can simplify signal-chain design when the available headroom is limited.

The chip-select function is an important architectural feature for portable and wearable systems. When the amplifier is disabled, its supply current can be reduced, helping preserve battery capacity during inactive periods. The MSOP-8 package supports compact PCB layouts while exposing the standard amplifier, power, and chip-select connections. Designers should account for input bias current, output settling behavior, capacitive loading, and the limited bandwidth when using the amplifier with higher-frequency signals.

Typical applications include low-voltage sensor conditioning, portable measurement equipment, battery-operated instruments, industrial process-control interfaces, wearable products, and general-purpose analog signal buffers. The MCP6043-I/MS is especially appropriate when the signal bandwidth is modest, the supply voltage is low, and operation near the supply rails is useful. The chip-select pin can also support duty-cycled acquisition systems where the amplifier is enabled only during measurements.

For PCB implementation, place the decoupling capacitor close to the supply pin and connect the analog ground and signal-return paths carefully. Avoid driving the output into severe capacitive loading, and check the settling response before using the amplifier in a sampled measurement system. The MSOP package requires thermal and assembly planning appropriate to a small-outline surface-mount footprint.

This page combines manufacturer and distributor specifications, same-package replacement options, application guidance, and practical design notes to support component selection, sourcing, and first-board design. Use the manufacturer datasheet and product page for final electrical limits, pin assignments, and production purchasing decisions.

Pilihan pengganti yang segera untuk MCP6043-I/MS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

MCP6043-E/MS

✅ Masuk Drop-In
📦 8-pin MSOP
Same MCP6043 family and 8-pin MSOP package; E and I suffixes indicate different temperature grades

📋 Alternatif rujukan (tidak dalam katalog)

MCP6043T-I/MS

✅ Masuk Drop-In
📦 8-pin MSOP
Same MCP6043 family and 8-pin MSOP package; T denotes tape-and-reel packing with no core electrical difference stated

📋 Alternatif rujukan (tidak dalam katalog)

MCP6043-I/MS Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Single operational amplifier
Channel Count 1 channel
Supply Voltage Minimum 1.6 V
Family Minimum Supply Voltage 1.4 V
Maximum Quiescent Current Less than 1.0 uA per amplifier
Gain-Bandwidth Product 14 kHz
Slew Rate 0.003 V/us
Input Bias Current 1 pA
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Gambaran Suhu Operasi -40C to +125C
Kemasan 8-pin MSOP
Jenis Pemasangan Surface mount
Automotive Qualification AEC-Q100
Chip Select Yes
Output Offset Voltage 3 mV

Panduan Konfigurasi Pin MCP6043-I/MS 8-pin msop

Konfigurasi pin untuk MCP6043-I/MS (8-pin msop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin msop untuk MCP6043-I/MS

Tiada data garisan pin yang diperoleh untuk MCP6043-I/MS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MCP6043-I/MS patut untuk 6 aplikasis: Low-Voltage Sensor Signal Conditioning, Battery-Powered Portable Instruments, Wearable Health and Monitoring Devices, Industrial Process-Control Interface, Portable Audio and Communication Buffering, Data Acquisition and Gain Stage.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6043-I/MS fits sensor interfaces that operate from a low single supply because its listed minimum supply is 1.6 V and its input and output stages support rail-to-rail operation. The approximately 14 kHz gain-bandwidth product is appropriate for slow resistive, capacitive, or level-based sensors where preserving the signal is more important than high-speed response. Its less-than-1.0-uA-per-amplifier quiescent current also helps limit standby consumption. Configure the amplifier with the minimum noise gain that provides the required accuracy, and verify settling time before using the circuit for a precision acquisition channel.

📱

Battery-Powered Portable Instruments

The MCP6043-I/MS supports compact battery-operated instruments by combining a 1.6 V minimum listed supply with less than 1.0 uA of quiescent current per amplifier. Rail-to-rail input and output operation allows more of a low-voltage system rail to be used for measurement signals. The amplifier can buffer slow analog outputs or condition sensor nodes without requiring a high-voltage bipolar supply. Use the chip-select function during inactive intervals, and check the manufacturer electrical table for enable current, output behavior, and settling requirements in the intended duty cycle.

💊

Wearable Health and Monitoring Devices

The MCP6043-I/MS is suitable for low-power wearable monitoring when a sensor signal must be buffered close to its source. Its 1 pA listed input bias current minimizes disturbance of high-impedance sensing nodes, while the rail-to-rail input characteristic supports operation over most of a compact sensor supply. The modest 14 kHz bandwidth is suitable for slow physiological or environmental measurements, but it is not appropriate for high-bandwidth signals. Confirm electrode biasing, patient-safety isolation requirements, leakage current, and applicable medical-device standards outside the amplifier's own datasheet.

🏭

Industrial Process-Control Interface

The MCP6043-I/MS can serve as the input or output buffer in an industrial process-control interface when the signal bandwidth is modest. The industrial-temperature ordering suffix, rail-to-rail operation, and AEC-Q100 listing support designs requiring qualification awareness, although system-level requirements still determine suitability. With a 14 kHz gain-bandwidth product, the amplifier is best suited to slow pressure, temperature, and level signals rather than high-speed servo loops. Place the device close to the protected analog section, maintain a common ground reference, and verify isolation or protection requirements at the system level.

🎧

Portable Audio and Communication Buffering

The MCP6043-I/MS can buffer low-level communication or audio-control signals in a compact, low-power system. Its rail-to-rail input and output capability helps retain signal swing at a 1.6 V-class supply, while the slow 14 kHz bandwidth suits control, monitoring, or low-frequency auxiliary channels rather than full-bandwidth audio. The 1 pA listed input bias current is also favorable when driving a high-impedance source. Check the required signal level, output load, distortion, and noise bandwidth, and avoid assuming the amplifier can reproduce high-frequency audio content.

📺

Data Acquisition and Gain Stage

The MCP6043-I/MS can provide a general-purpose gain or buffer stage ahead of a low-speed data converter in a compact acquisition system. Its rail-to-rail behavior, 1 pA listed input bias current, and low quiescent current suit instrumentation where the source impedance and available supply voltage are constrained. The 14 kHz gain-bandwidth product determines the maximum practical closed-loop bandwidth, so higher noise-gain configurations reduce usable signal frequency. Select resistor values for the required gain, verify source and sink current capability, and confirm converter acquisition timing during power-up and chip-select transitions.

What are the key specifications of MCP6043-I/MS that engineers should know?
The MCP6043-I/MS is a single, rail-to-rail-input and rail-to-rail-output operational amplifier in an 8-pin MSOP package. Key specifications include a 1.6 V minimum supply for the listed device, approximately 14 kHz gain-bandwidth product, 0.003 V/us slew rate, 1 pA input bias current, and less than 1.0 uA quiescent current per amplifier. The Microchip manufacturer page identifies the MCP6043 family as operating down to 1.4 V and including chip select.
Where can I download the MCP6043-I/MS datasheet PDF?
The MCP6043-I/MS manufacturer product page is https://www.microchip.com/en-us/product/MCP6043, where the manufacturer presents the device family and its documentation. Use the datasheet linked from that page for the authoritative pin description, electrical characteristics, recommended operating conditions, and package drawings. The distributor result at https://www.icdirectory.com/d/integrated-circuits/mcp6043-i-ms.pdf is another listing associated with the MCP6043 family datasheet.
Where can I find the MCP6043-I/MS pinout?
Use the pin-description table and package drawing on the Microchip MCP6043 manufacturer page to assign MCP6043-I/MS pins. The verified listing identifies the device as an 8-lead MSOP operational amplifier, but it does not publish the individual pin numbers or names in its visible text. The manufacturer data should therefore be the controlling source for the exact MCP6043-I/MS pinout before PCB routing or schematic capture.
What is the operating voltage of MCP6043-I/MS?
The MCP6043-I/MS operates from a minimum listed supply of 1.6 V. Microchip describes the broader MCP6043 family as capable of operation as low as 1.4 V, so the individual device datasheet should define the exact recommended and absolute maximum supply limits for production use. This low-voltage capability supports compact battery-operated sensor, portable measurement, and wearable-product circuits.
Is MCP6043-I/MS rail-to-rail?
Yes, the MCP6043-I/MS supports rail-to-rail input and output operation. The manufacturer product page identifies both characteristics for the MCP6043 family, and the distributor specification describes the device as a rail-to-rail-input, rail-to-rail-output amplifier. These features are useful at low supply voltages because they increase usable input and output range compared with fixed common-mode and saturation limits.
What is the gain-bandwidth product of MCP6043-I/MS?
The MCP6043-I/MS has a gain-bandwidth product of approximately 14 kHz. The listed figure makes it appropriate for slow sensor signals, buffering, and low-bandwidth control loops rather than high-speed signal processing. Account for finite closed-loop bandwidth when choosing the noise gain, and verify settling time for the actual gain configuration and signal amplitude used in the application.
What is the quiescent current of MCP6043-I/MS?
The MCP6043 family draws less than 1.0 uA of quiescent current per amplifier according to the Microchip manufacturer product page. The chip-select function adds an important power-management benefit because it allows a system to disable the amplifier when it is not needed. Use the manufacturer datasheet for the exact operating and shutdown current conditions and the required logic levels.
MCP6043-I/MS vs MCP6043-E/MS - which is better for an industrial design?
MCP6043-E/MS is the same-family MSOP-8 option identified through the manufacturer-linked cross-reference result, while MCP6043-I/MS is the industrial-temperature ordering option. The two suffixes represent different temperature grades, so the MCP6043-I/MS is generally preferable when the industrial temperature range is required. Confirm the exact grade, pin compatibility, qualification requirements, and ordering information against the Microchip datasheet before substitution.
Can MCP6043T-I/MS replace MCP6043-I/MS on the same PCB?
MCP6043T-I/MS is an 8-pin MSOP ordering option for the MCP6043 family and is the closest same-package candidate in the cross-reference results. Its T suffix identifies the tape-and-reel ordering form, while MCP6043-I/MS is listed as an 8-pin MSOP part. Confirm the manufacturer ordering table for lifecycle status, temperature grade, packing details, and any marking or qualification differences before treating it as a drop-in replacement.
When should I choose MCP6043-I/MS over another MCP6043 option?
Choose MCP6043-I/MS when the design needs the industrial-temperature MCP6043 variant in an 8-pin MSOP package with rail-to-rail input and output, low quiescent current, and chip select. It is particularly suitable for portable or industrial low-voltage signal conditioning where the operating temperature requirement outweighs selection of a different grade. The exact supply limits and current consumption should be checked for the selected temperature range.
What is the best drop-in replacement for MCP6043-I/MS?
MCP6043-E/MS is the primary same-family MSOP-8 candidate identified by the cross-reference results, while MCP6043T-I/MS is a second 8-pin MSOP ordering candidate. Both require final confirmation of electrical equivalence, temperature grade, qualification, and lifecycle status in the Microchip ordering information. Fewer than five independently verified drop-in alternatives were established, so adding unrelated amplifier types would risk PCB or specification incompatibility.
What can replace MCP6043-I/MS?
The verified replacement candidates are MCP6043-E/MS and MCP6043T-I/MS because both are identified as MCP6043-family parts in the 8-pin MSOP format. A valid replacement should preserve the amplifier pins, supply range, rail-to-rail behavior, chip-select function, bandwidth, and required temperature grade. Review the manufacturer ordering table and datasheet before changing the fitted part or approving it for production.
Is MCP6043-I/MS the same as MCP6043-E/MS?
MCP6043-I/MS and MCP6043-E/MS share the MCP6043 family and MSOP-8 format, but they are not identical ordering codes. The principal distinction indicated by the suffixes is the temperature grade, with the I version representing the industrial-temperature option. Treat them as a same-package replacement only after verifying the full ordering table, qualification status, and lifecycle information.
Where can I buy MCP6043-I/MS and what is the current price?
Use the Request a Quote form on this page for current unit pricing, stock status, lead time, and minimum order quantity for MCP6043-I/MS. The manufacturer product page identifies the MCP6043 family and its intended low-power applications, while distributor listings provide additional sourcing information. Because market pricing and inventory change rapidly, a quote response is the appropriate way to obtain current commercial terms.
Is MCP6043-I/MS in stock and what is its lead time?
Current MCP6043-I/MS inventory, lead time, and minimum order quantity should be confirmed through the Request a Quote form on this page. Distributor availability can change without notice and may differ by package, temperature grade, and ordering code. For production planning, request the exact MCP6043-I/MS MPN and state the required quantities, delivery date, and acceptable packaging.

Data referensi kejuruteraan untuk MCP6043-I/MS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP6043-I/MS for a low-voltage, low-power signal-conditioning design that requires an industrial-temperature grade, rail-to-rail input and output, chip select, and an 8-pin MSOP footprint. Its approximately 14 kHz bandwidth is suitable for slow sensors, buffering, and portable measurement systems, not high-speed waveform work. MCP6043-E/MS is the logical same-family alternative when the E temperature grade is acceptable, but it does not match the target's industrial-temperature ordering code. MCP6043T-I/MS provides the same family and MSOP format in a tape-and-reel ordering form for automated assembly. Because the available cross-reference information establishes only these two alternatives, other amplifier families should not be treated as drop-in parts without a separate pin, supply, feature, bandwidth, and qualification review.

Perbandingan dengan Gantian

Parametr Produk Ini MCP6043-E/MS MCP6043T-I/MS
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-pin MSOP 8-pin MSOP 8-pin MSOP
Device Type Single operational amplifier with chip select Single MCP6043-family operational amplifier with chip select Single MCP6043-family operational amplifier with chip select
Temperature Grade Industrial Extended commercial grade indicated by E suffix Industrial grade indicated by I suffix

Penyeberangsung Jelas

  • Industrial-temperature ordering option (vsMCP6043-E/MS)
  • Rail-to-rail operation at a low listed supply (vsMCP6043T-I/MS)
  • Very low quiescent current with chip select (vsMCP6043-E/MS)

Catatan Desain

Use the MCP6043-I/MS chip-select function when the amplifier is idle, and confirm the required logic levels, enable current, and output state against the manufacturer electrical characteristics. Place the supply bypass capacitor directly between the supply and ground pins, with a short ground return. Because the family is intended for very low quiescent current, contaminated PCB leakage or an unsuitable reference can consume more current than the amplifier itself in a high-impedance design.

Keep the amplifier input, feedback network, and decoupling capacitor in a compact analog section with a continuous return path to the device ground pin. Avoid routing sensitive input traces beside chip-select or other fast digital nets. For a high-impedance source, use guarding and clean board surfaces where practical, and keep leakage-producing connectors or protection devices away from the input node. The listed 1 pA input bias current makes layout cleanliness especially important.

Account for the approximately 14 kHz gain-bandwidth product when selecting closed-loop gain and expected signal bandwidth. Higher noise gain reduces the usable closed-loop bandwidth and can lengthen settling time before a converter samples the output. Check the output load, capacitive-load stability guidance, and step-response behavior in the manufacturer datasheet. The 0.003 V/us slew rate also means large voltage changes require additional settling time.

Do not treat the I, E, T, or package suffixes as interchangeable without checking the Microchip ordering table. The I suffix identifies the industrial-temperature option, while T identifies a tape-and-reel ordering form. Verify the exact MSOP package, pinout, qualification, lifecycle state, and shipping format before substitution. Also confirm that the desired signal bandwidth remains well below the amplifier's closed-loop bandwidth at the selected noise gain.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The MCP6043-I/MS distributor listing identifies the device as AEC-Q100 automotive qualified. Other compliance attributes are not stated and remain unknown.

Pencarian Berhubungan

mcp604 datasheet MCP6043-I/MS datasheet MCP6043-I/MS pinout MCP6043-I/MS specifications MCP6043-I/MS equivalent MCP6043-I/MS replacement MCP6043-I/MS price MCP6043-I/MS stock Microchip MCP6043-I/MS MCP6043-I/MS 8-pin MSOP MCP6043-I/MS rail-to-rail op amp MCP6043-I/MS vs MCP6043-E/MS MCP6043-I/MS low voltage amplifier MCP6043-I/MS sensor signal conditioning

Komponen dan Tanda berkaitan

Microchip Technology MCP6043 MCP6043-I/MS MCP6043-E/MS MCP6043T-I/MS Operational amplifier Op amp Analog semiconductor Single amplifier Rail-to-rail input Rail-to-rail output Chip select Gain-bandwidth product Slew rate Quiescent current Input bias current Low-voltage operation 8-pin MSOP MSOP package family Surface-mount device Industrial process control Battery-powered equipment Wearable electronics Sensor signal conditioning AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ