NXP Semiconductors

MKE02Z32VLH2 - 20MHz Cortex-M0+ 32KB MCU | NXP

MPN: MKE02Z32VLH2 ✓ Aktif
5 V Vdss 64-LQFP (10 x 10 mm) Package 20 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

MKE02Z32VLH2 Ringkasan

The NXP MKE02Z32VLH2 is a 20 MHz ARM Cortex-M0+ Kinetis KE02 microcontroller with 32 KB of Flash memory, 4 KB of SRAM, and a 64-LQFP 10 x 10 mm package. It is an active, general-purpose embedded MCU designed for cost-sensitive control systems that require reliable 5 V operation and compact integration. The device belongs to the Kinetis E microcontroller family and combines a low-power 32-bit architecture with integrated resources for communication, analog measurement, timers, and digital control.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The MKE02Z32VLH2 is specifically a Kinetis KE02 microcontroller, placing it in the ARM Cortex-M0+ class of 32-bit embedded processors. This class targets compact industrial, consumer, and automotive-adjacent products where deterministic control, low power consumption, and broad peripheral integration are more important than high processor throughput or extensive code storage.

The principal device characteristics are a 20 MHz Cortex-M0+ core, 32 KB of Flash program memory, and 4 KB of SRAM. Its 64-LQFP package provides 64 external pins and a 10 x 10 mm body size, making it suitable for conventional through-hole assembly and prototype layouts. The Flash write-voltage range of 2.7 V to 5.5 V supports operation from regulated 5 V industrial and automotive-style systems. The manufacturer identifies the part as active and positions KE02 as the entry point to the Kinetis E portfolio.

The KE02 architecture is aimed at embedded control workloads that need predictable peripheral operation rather than intensive data processing. Its Cortex-M0+ instruction set provides a 32-bit programming model while maintaining a compact implementation suitable for cost-sensitive systems. The power-management module supports Run, Wait, and Stop operating modes, allowing firmware to reduce activity when the application does not require continuous processing. The 32 KB Flash capacity is sufficient for compact control firmware, boot logic, configuration tables, and peripheral drivers.

Typical uses include small motor controllers, appliance controllers, building equipment, industrial sensor nodes, communication interfaces, and compact embedded products. In these systems, the MCU can coordinate analog and digital inputs, drive timers and outputs, and manage communication tasks. A 5 V supply with a 2.7 V to 5.5 V Flash programming range provides compatibility with established industrial control boards, while the 64-LQFP footprint exposes more I/O than small-outline packages and remains practical for hand-soldered prototypes.

PCB planning should preserve access to every LQFP pin and provide clean grounding around the power pins. Decoupling capacitors must be placed close to the supply and ground pins, while programming and debug signals should be routed away from noisy motor-drive and switching nodes. Confirm the complete pin assignment, exposed programming functions, and peripheral multiplexing in the manufacturer datasheet before finalizing the schematic or footprint.

This product page consolidates the verified device identity, lifecycle state, package information, core and memory specifications, sourcing workflow, replacement assessment, and application-oriented design guidance. It also distinguishes confirmed drop-in options from near relatives with different clock architecture or package options, helping engineers make a defensible PCB and firmware decision before committing to a bill of materials.

Pilihan pengganti yang segera untuk MKE02Z32VLH2 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

MKE02Z32VLH2 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit Kinetis KE02 microcontroller
Processor Core ARM Cortex-M0+
Maximum Core Frequency 20 MHz
Flash Memory 32 KB (32K x 8)
SRAM 4 KB
Architecture 32-bit
Operating Voltage 5 V
Flash Write Voltage Range 2.7 V to 5.5 V
Kemasan 64-LQFP (10 x 10 mm)
Kiraan Pin 64 pins
Jenis Pemasangan Surface mount
Power Modes Run, Wait, and Stop
Product Series Kinetis KE02
Status Lingkungan Hidup Active

Panduan Konfigurasi Pin MKE02Z32VLH2 64-lqfp (10 x 10 mm)

Konfigurasi pin untuk MKE02Z32VLH2 (64-lqfp (10 x 10 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 64-lqfp (10 x 10 mm) untuk MKE02Z32VLH2

Tiada data garisan pin yang diperoleh untuk MKE02Z32VLH2.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MKE02Z32VLH2 patut untuk 6 aplikasis: Compact Motor Controller, Industrial Sensor Node, Appliance Control Board, Building Equipment Interface, Communication Gateway, LED Driver and Lighting Controller.

🏭

Compact Motor Controller

The MKE02Z32VLH2 fits compact motor-control systems that need deterministic digital control without the storage and processing demands of a high-end MCU. Its 20 MHz ARM Cortex-M0+ core can execute position, speed, or duty-cycle algorithms, while 32 KB of Flash accommodates motor-control firmware and 4 KB of SRAM supports working state. The 64-LQFP package exposes enough pins for encoder inputs, control outputs, communication, and protection signals. Run, Wait, and Stop power modes can reduce activity when the controller is idle. Firmware must include appropriate dead time, fault handling, and output-state initialization, and the PCB should keep switching-node return paths separated from sensitive control and ground paths.

🧩

Industrial Sensor Node

The MKE02Z32VLH2 is appropriate for distributed sensor nodes that acquire measurements, apply filtering, and transmit summarized status data. A 20 MHz Cortex-M0+ core provides sufficient control headroom for many sensor-conditioning and communication tasks, while 32 KB of Flash supports drivers and protocol stacks of modest size. Its 5 V operating designation and 2.7 V to 5.5 V Flash write range align with conventional industrial sensing boards. The 64-LQFP package provides a generous pin count for digital sensors, analog interfaces, status indicators, and serial links. Designers should use the datasheet to allocate the ADC and communication functions, then isolate analog inputs and communication returns from switching power-conversion paths.

🔧

Appliance Control Board

The MKE02Z32VLH2 can serve as the central controller in a small appliance or equipment subsystem where a user interface, sensors, relays, and communication functions must be coordinated. Its 32-bit Cortex-M0+ architecture supports structured firmware organization, and 32 KB of Flash is practical for a focused appliance controller rather than a highly connected embedded platform. The 64-LQFP package makes the pin-rich end product straightforward to route and inspect during prototype assembly. Use Stop mode only after verifying wake sources and peripheral states, and define safe outputs during reset and brownout conditions. Relay or motor outputs should include appropriate driver stages because the MCU pins are control signals, not direct high-current load drivers.

🏭

Building Equipment Interface

The MKE02Z32VLH2 is suitable for building-equipment interface modules that translate switches, sensors, and field-bus activity into local control decisions. Its 20 MHz Cortex-M0+ processor can service multiple digital inputs, timers, and serial protocols, while the 64-LQFP package simplifies access to the numerous signals found in equipment controllers. The Run, Wait, and Stop modes support duty-cycled monitoring when the module spends substantial time idle. Firmware should debounce external contacts, validate communication frames, and provide safe fallback states for disconnected equipment. PCB design should use a solid ground structure, localized decoupling, and protected routing for long external cables connected to building wiring.

🌐

Communication Gateway

The MKE02Z32VLH2 can implement a small serial gateway or protocol bridge when traffic volume and protocol complexity are modest. Its 20 MHz Cortex-M0+ core can format frames and manage timers, the 32 KB Flash capacity can hold concise protocol handlers, and the 4 KB SRAM can support packet staging and protocol state. The 64-LQFP footprint offers enough pins for multiple interfaces, reset control, status indication, and programming access. Firmware must include baud-rate tolerance, timeout handling, checksum validation, and escalation behavior for malformed frames. Place interface drivers near their connectors and use controlled return paths to prevent externally connected cables from injecting noise into the MCU and its timing-critical peripherals.

💡

LED Driver and Lighting Controller

The MKE02Z32VLH2 can coordinate dimming, status indication, and protection logic in a dedicated lighting-control module. Its 20 MHz core provides enough resolution for common PWM-based dimming schemes, while 32 KB of Flash and 4 KB of SRAM are appropriate for a focused controller with configurable lighting effects. The 64-LQFP package exposes pins for switch commands, fault feedback, and external interfaces without requiring a very small package. PWM and timer settings must be derived from the required update and dimming frequencies, and the firmware should force a defined output state during reset. Keep the MCU and control ground away from high-current LED return paths, and place input filtering close to the connector.

Ringkasan Produk Disebarkan

MKE02Z32VLH2 NXP Semiconductors Dipergunakan di: Compact Motor Controller, Industrial Sensor Node, Appliance Control Board, Building Equipment Interface, Communication Gateway, LED Driver and Lighting Controller MKE02Z32VLH4R Same-package 40 MHz KE02 option for tighter control timing Dipergunakan di: Compact Motor Controller, Industrial Sensor Node, Appliance Control Board, Building Equipment Interface, Communication Gateway, LED Driver and Lighting Controller
What is the operating voltage of MKE02Z32VLH2?
The MKE02Z32VLH2 operates from a 5 V supply, while its Flash write-voltage range is 2.7 V to 5.5 V. According to the NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet, the power architecture and programming range are suitable for established 5 V embedded-control boards. Designers should confirm individual peripheral voltage limits and signal-level tolerances in the electrical-characteristics tables before applying the device to a new board.
What are the key specifications of MKE02Z32VLH2 that engineers should know?
The MKE02Z32VLH2 combines a 20 MHz ARM Cortex-M0+ core, 32 KB of Flash, 4 KB of SRAM, and a 64-LQFP package measuring 10 x 10 mm. The NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet also identifies Run, Wait, and Stop power modes and a 2.7 V to 5.5 V Flash write range. These specifications position the MCU for compact 32-bit control, communication, and general-purpose embedded applications.
Where can I download the MKE02Z32VLH2 datasheet PDF?
The MKE02Z32VLH2 datasheet can be obtained from the official NXP product page at https://www.nxp.com/part/MKE02Z32VLH2. The underlying KE02 documentation is identified as Technical Data Document MKE02P64M20SF0 Rev. 7, 12/2019. Use the manufacturer's PDF for the authoritative pin descriptions, electrical characteristics, memory map, power-mode behavior, and recommended application circuits.
Where can I find the MKE02Z32VLH2 pinout?
The MKE02Z32VLH2 pin assignments are published in the NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet. The device uses a 64-LQFP package, so the physical footprint contains 64 numbered positions. Use the datasheet pin-description table to map power, ground, reset, programming, clock, and peripheral signals before assigning PCB tracks or choosing a substitute.
What is MKE02Z32VLH2 used for?
The MKE02Z32VLH2 is used for compact embedded-control systems requiring a 20 MHz 32-bit processor, 32 KB of Flash, and 4 KB of SRAM. Its 64-LQFP format provides substantial external I/O for sensors, actuators, communications, and discrete control functions. The NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet describes the device as a 5 V robust MCU suited to general-purpose embedded designs.
Is MKE02Z32VLH2 suitable for industrial and automotive-style control boards?
The MKE02Z32VLH2 is suitable for many 5 V industrial and automotive-style control applications, but its exact environmental qualification must be checked before deployment. The device has a 2.7 V to 5.5 V Flash write range and an operating supply identified as 5 V. Temperature limits, transient protection, and AEC-Q100 status should be confirmed in the NXP datasheet for the final environmental envelope.
MKE02Z32VLH2 vs MKE02Z32VLH4R — which is better for a new design?
The MKE02Z32VLH2 is the appropriate choice when a 20 MHz Cortex-M0+ implementation is sufficient, while MKE02Z32VLH4R provides a 40 MHz configuration in the same 64-LQFP 10 x 10 mm package. According to the NXP listings for both devices, each has 32 KB of Flash. The LH4R offers 100% more maximum core frequency, but firmware timing, power, and peripheral behavior must be reviewed before treating it as an equivalent.
What is the difference between MKE02Z32VLH2 and MKE02Z32VLC2?
The principal documented difference is package and package-code configuration: MKE02Z32VLH2 uses a 64-LQFP 10 x 10 mm package, while MKE02Z32VLC2 uses the V L C ordering code with a different package configuration. Both are associated with 32 KB Flash KE02-family devices, but MKE02Z32VLC2 is not a confirmed drop-in substitute for the LH2 footprint. A PCB change and full pin-function review are required.
When should I choose MKE02Z32VLH2 over a faster 40 MHz MCU?
Choose the MKE02Z32VLH2 when the control loop, serial traffic, and peripheral timing fit within a 20 MHz Cortex-M0+ core and the design benefits from 32 KB of Flash and 4 KB of SRAM. It can simplify software timing and reduce unnecessary processing headroom. Select a 40 MHz MKE02Z32VLH4R only when the system benefits from the additional 20 MHz of core performance.
When should I choose MKE02Z32VLH2 instead of MKE02Z32VLC2?
Choose the MKE02Z32VLH2 when the PCB requires the specified 64-LQFP 10 x 10 mm footprint and its 20 MHz architecture meets the application timing requirements. Choose MKE02Z32VLC2 only when its package, pin multiplexing, electrical limits, and software configuration suit the design. Because the package codes differ, existing LH2 boards should not be assumed to accept the VLC2 device without redesign.
What can replace MKE02Z32VLH2?
The MKE02Z32VLH4R is the closest confirmed same-package relative because it uses a 64-LQFP 10 x 10 mm package and retains 32 KB of Flash, but it is rated at 40 MHz rather than 20 MHz. It is therefore not a parameter-identical drop-in and requires firmware, timing, and power review. Use the NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet to validate every pin and peripheral function.
Is there a pin-to-pin STM32 replacement for MKE02Z32VLH2?
No STM32 replacement is established as a true drop-in for the MKE02Z32VLH2 in the available cross-reference material. The STM32F100R8T6B and STM32F100R8T7B comparisons show a 64-LQFP format, but differences in core architecture, memory organization, peripheral mapping, and pin multiplexing can prevent board-level interchangeability. Treat them as redesign candidates rather than drop-in replacements.
Where to buy MKE02Z32VLH2 online?
Use the Request a Quote form on this page to request MKE02Z32VLH2 availability, lead time, and order quantity. The request should identify the exact MKE02Z32VLH2 ordering code and confirm whether the order requires the standard 64-LQFP package. This page does not provide a static price or current stock count because both can change during the quotation cycle.
What is the price of MKE02Z32VLH2?
Submit MKE02Z32VLH2 to the Request a Quote form on this page for a current quotation. The form supports quantity-break review without embedding a potentially stale price in technical content. For a valid comparison, include the required quantity, target delivery date, ship-to country, and whether reel, tray, or another approved delivery configuration is needed.
What is the lead time and stock status for MKE02Z32VLH2?
Current stock and lead time for MKE02Z32VLH2 should be confirmed through the Request a Quote form on this page. NXP lists the MKE02Z32VLH2 as active, which indicates continued product availability within the manufacturer portfolio but does not guarantee immediate allocation at every quantity. Include your required delivery date and production forecast when requesting the quotation.

Data referensi kejuruteraan untuk MKE02Z32VLH2 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the MKE02Z32VLH2 when a 20 MHz Cortex-M0+ core, 32 KB of Flash, 4 KB of SRAM, and a 64-LQFP 10 x 10 mm package align with the product architecture. It is particularly suitable for compact controllers, sensor nodes, protocol bridges, and appliance interfaces that do not require high-speed computation. MKE02Z32VLH4R retains the same visible package and Flash capacity but doubles the listed clock to 40 MHz, so review firmware timing, power, and peripheral behavior before using it as an alternative. MKE02Z32VLC2 uses a different package ordering code and should be treated as a design alternative rather than an LH2 board drop-in. STM32F100 devices in the same general pin-count class are redesign candidates because core behavior, memory organization, and peripheral multiplexing differ. For an existing MKE02Z32VLH2 PCB, retain the exact device unless the manufacturer confirms pin-compatible operation.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 64-LQFP (10 x 10 mm)
Brand NXP Semiconductors
Product Family Kinetis KE02
Processor Core ARM Cortex-M0+
Maximum Core Frequency 20 MHz
Flash Memory 32 KB
SRAM 4 KB
Operating Supply 5 V
Flash Write Voltage Range 2.7 V to 5.5 V
Power Modes Run, Wait, and Stop
Lifecycle Status Active
Pin Count 64 pins

Penyeberangsung Jelas

  • Direct 20 MHz fit for cost-sensitive embedded control (vsMKE02Z32VLH4R)
  • 64-LQFP footprint supports practical prototype assembly (vsMKE02Z32VLC2)
  • Power-management options for embedded operation (vsMKE02Z32VLH4R)

Catatan Desain

Place the required supply-decoupling capacitors directly between each MCU supply pin and the nearest ground reference, with short ground paths and minimal loop area. The 64-LQFP footprint also demands uniform fanout for all 64 positions; use the manufacturer land pattern rather than constructing it from a generic 64-pin drawing. Check pin-1 orientation against the package marking and verify every power and ground connection before programming.

Keep reset, clock, and programming signals away from motor-drive, relay, or power-converter switching nodes. Use a continuous ground plane where practical, route external cable returns directly to their protection circuitry, and avoid allowing transient currents from inductive loads to cross the MCU ground region. Short series resistance at connector inputs and local filtering can help preserve signal integrity in industrial equipment.

Do not assume that a device with the same 64-LQFP outline is a drop-in replacement. MKE02Z32VLH4R has a different 40 MHz configuration, while MKE02Z32VLC2 uses a different package ordering code. Before substitution, compare every pin, power architecture, clock setting, peripheral multiplexer, startup sequence, and firmware timing requirement against the NXP MKE02P64M20SF0 Rev. 7, 12/2019 datasheet.

Use Stop, Wait, and Run modes intentionally rather than leaving the controller continuously active. Entry to Stop mode can change peripheral clock availability and wake behavior, so the firmware should enable only required wake sources and reinitialize or verify interfaces after waking. Validate average current, regulator headroom, and startup current at the system level because the package temperature and voltage conditions determine allowable dissipation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer lists the MKE02Z32VLH2 as active. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not confirmed by the cited product information.

Pencarian Berhubungan

MKE02Z32VLH2 datasheet MKE02Z32VLH2 pinout MKE02Z32VLH2 datasheet pdf MKE02Z32VLH2 specifications MKE02Z32VLH2 64-LQFP pinout MKE02Z32VLH2 equivalent MKE02Z32VLH2 replacement MKE02Z32VLH2 cross reference MKE02Z32VLH2 vs MKE02Z32VLH4R MKE02Z32VLH2 price MKE02Z32VLH2 stock NXP MKE02Z32VLH2 MKE02Z32VLH2 application circuit MKE02Z32VLH2 footprint

Komponen dan Tanda berkaitan

NXP Semiconductors MKE02Z32VLH2 MKE02Z32VLH4R MKE02Z32VLC2 Kinetis KE02 Kinetis E ARM Cortex-M0+ microcontroller embedded processor semiconductor 32-bit microcontroller Flash memory SRAM LQFP-64 surface-mount package power management module Run mode Wait mode Stop mode motor control industrial sensor node communication gateway LED driver MKE02P64M20SF0 Rev. 7
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ