MSP430F447IPZ - 8MHz 16-Bit MCU with 32KB Flash | Texas Instruments
MPN: MSP430F447IPZ ✓ AktifMSP430F447IPZ Ringkasan
A mixed-signal microcontroller integrates a digital processor with analog conversion and comparison functions on one device. The MSP430 architecture belongs to the microcontroller, embedded processor, and semiconductor hierarchy, while its ADC, comparator, serial interfaces, and LCD driver make it especially useful for battery-powered instruments, panel meters, and industrial sensing equipment.
Key features include an 8 MHz maximum clock, 32KB Flash organized as 32K x 8 plus 256 bytes, 1KB SRAM, a 12-bit ADC, an internal comparator, SPI and UART connectivity, and support for up to 160 LCD segments. These resources allow firmware to combine acquisition, signal conditioning, display driving, and serial communication without requiring several discrete devices.
The MSP430 CPU uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its mixed-signal peripherals support sampled data acquisition and threshold comparison, while the LCD controller reduces the external display-driver burden for segmented instruments. The manufacturer describes the family as optimized for low-power portable measurement applications, with five low-power modes available for duty-cycled operation.
Typical uses include digital multimeters, environmental monitors, portable industrial meters, panel instruments, and connected measurement equipment. The combination of 32KB Flash, 1KB SRAM, ADC, comparator, UART, SPI, and segmented LCD support is particularly useful when a compact embedded design must collect analog measurements, apply thresholds, update a local display, and exchange data with a host.
Designers should allocate pins and firmware carefully for LCD segments, analog inputs, serial interfaces, and mixed-signal grounding. Follow the pin-description table in the manufacturer datasheet when assigning tracks, and keep analog and digital return currents separated where the application board layout permits. Verify the operating voltage, temperature grade, and peripheral configuration for the exact ordering code before production release.
This product page combines the device specifications, pin-package information, functional alternatives, and engineering-oriented comparison notes to support faster component selection and board-level planning.
Pilihan pengganti yang segera untuk MSP430F447IPZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MSP430F447IPZ (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, ADC Resolution, Package, SRAM, Operating Temperature Range.
MSP430F447IPZR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MSP430F449IPZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MSP430F449IPZR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MSP430F448IPZ
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MSP430F447IPZ Penilaian maksimum & Ciri-ciri Elektrik
| CPU Architecture | 16-bit RISC |
| Frekuensi Klock Maksimum | 8 MHz |
| Flash Memory | 32KB (32K x 8 plus 256B) |
| SRAM | 1KB |
| ADC Resolution | 12-bit |
| ADC Quantity | 1 |
| Comparator Quantity | 1 |
| Serial Interface | SPI/UART |
| UART Quantity | 2 |
| LCD Segment Support | 160 segments |
| Low-Power Modes | 5 modes |
| Register Width | 16-bit |
| Kemasan | 100-LQFP (14x14 mm) |
| Jenis Pemasangan | Surface Mount |
Panduan Konfigurasi Pin MSP430F447IPZ 100-lqfp (14x14 mm)
Konfigurasi pin untuk MSP430F447IPZ (100-lqfp (14x14 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MSP430F447IPZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MSP430F447IPZ patut untuk 6 aplikasis: Digital Multimeter, Environmental Monitoring, Industrial Panel Meter, Portable Process Meter, Battery-Powered Data Logger, Low-Power Sensor Node.
Digital Multimeter
The MSP430F447IPZ fits a handheld digital multimeter because its 12-bit ADC, comparator, 32KB Flash, and 1KB SRAM can support measurement acquisition, range decisions, calibration data, and display updates. The two UARTs provide a path for isolated communication or an accessory interface, while SPI can connect to an external memory or interface. The 160-segment LCD capability can drive a segmented instrument display without a separate high-performance display controller. Firmware should use the comparator for fast threshold actions and the ADC for measured values, while conserving the modest 1KB SRAM through compact buffers.
Disebarkan
Environmental Monitoring
The MSP430F447IPZ is appropriate for a compact environmental monitor that samples analog sensor signals, applies thresholds, records operating history, and presents measurements locally. Its 12-bit ADC provides a suitable acquisition resource for many low-frequency sensor systems, while the comparator can implement alarm thresholds without continuous software polling. The five low-power modes described by Texas Instruments support duty-cycled operation for battery deployments. The 32KB Flash stores calibration coefficients and compact event logs, and SPI can provide access to an external serial sensor or nonvolatile storage device.
Disebarkan
Industrial Panel Meter
The MSP430F447IPZ supports an industrial panel meter that must combine sensor acquisition, threshold alarms, local display output, and service communications. Its 160-segment LCD capability is useful for numeric and indicator graphics, while the comparator supports fast limit detection and the 12-bit ADC performs proportional measurements. Two UARTs can separate service diagnostics from an external system bus, and SPI offers additional expansion. For production equipment, validate the exact temperature range, isolation strategy, ESD protection, and EMC performance rather than relying on family-level suitability alone.
Disebarkan
Portable Process Meter
The MSP430F447IPZ can serve as the controller in a portable process meter for pressure, flow, or level monitoring where low power and compact display capability are priorities. The MCU combines a 16-bit processing core with a 12-bit ADC, comparator, and serial interfaces, reducing the need for separate logic devices. Its low-power operating modes permit wake, sample, display, and sleep cycles that help conserve battery energy. Firmware should keep the analog sampling path stable during LCD updates and use the UART for calibration or data logging while SPI supports higher-bandwidth expansion.
Disebarkan
Battery-Powered Data Logger
The MSP430F447IPZ suits a battery-powered data logger that periodically samples analog inputs, records compact events, and reports through a serial link. Its 1KB RAM requires attention to buffering, but the 32KB Flash can store firmware and limited nonvolatile records. The five low-power modes enable duty-cycled acquisition, while the comparator can detect thresholds with limited CPU involvement. If records exceed internal Flash capacity, SPI can connect to external storage. A practical design should calculate the average current from the selected active and sleep modes instead of using a single operating-current assumption.
Disebarkan
Low-Power Sensor Node
The MSP430F447IPZ is well suited to a low-power sensor node that combines local sensing, event detection, display feedback, and occasional host communication. The 12-bit ADC samples proportional sensor conditions, the comparator handles rapid threshold events, and the 160-segment LCD capability can provide local status indication where a display is present. Two UARTs support flexible device and host communication, while SPI can accommodate a radio or external memory. Low-power operation should be designed around the datasheet mode-transition and wake-up characteristics to achieve useful battery life in the field.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MSP430F447IPZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MSP430F447IPZR | MSP430F449IPZ | MSP430F449IPZR | MSP430F448IPZ |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
Penyeberangsung Jelas
- Exact same-device reel option (vsMSP430F447IPZR)
- Same-package MSP430 family flexibility (vsMSP430F449IPZ)
- Integrated measurement and display resources (vsMSP430F448IPZ)
Catatan Desain
Use the manufacturer low-power-mode and operating-current tables to calculate average current from the actual duty cycle. Separate the acquisition, display-update, serial-communication, and sleep intervals because the 8 MHz CPU can remain active during measurement while the LCD and unused peripherals should be disabled between updates. Confirm the board's supply tolerance and regulator dropout against the exact operating-voltage limits before releasing the schematic.
Place analog input traces away from LCD segment outputs, clock-related routes, and serial switching nodes. Keep the analog reference and ADC return path compact, use a continuous ground reference beneath the analog section where practical, and route high-current return paths away from the MCU. Use the manufacturer recommended-decoupling table and place the required capacitors at the associated supply pins to limit supply disturbance during ADC sampling and LCD updates.
Do not treat the 1KB SRAM as a large general-purpose buffer. Partition memory for the stack, ADC samples, display data, and communication buffers, then measure the highest stack usage before finalizing the firmware. Likewise, verify the exact segment mapping, alternate pin functions, and peripheral conflicts for the 100-LQFP pinout; a display assignment that appears valid at the family level can conflict with ADC or serial-channel selection.
Define the analog acquisition path according to the source impedance and required sampling rate. The 12-bit ADC does not remove the need for input filtering, reference stability, source settling time, or protection ahead of the pin. Where a sensor produces a wide input range, use a suitable front-end rather than relying on software correction alone. Validate accuracy, offset, noise, and settling with the actual sensor and source resistance.
Maklumat Kesediaan
The manufacturer datasheet provides the core technical specifications. Compliance declarations were not identified in the cited product information and should be confirmed for the exact ordering code.
