PCM1792DBR - 24-Bit 192kHz Stereo DAC | Texas Instruments
MPN: PCM1792DBR ✓ AktifPCM1792DBR Ringkasan
An audio DAC is a semiconductor that converts digital PCM audio samples into an analog voltage or current signal. The PCM1792 belongs to the broader digital-to-analog converter category, where it sits between a digital audio interface and an analog output stage. Balanced differential current outputs provide a useful starting point for low-noise audio signal chains because they can be converted to single-ended voltage through an external current-to-voltage network.
The principal features are high-resolution conversion, operation at up to 192kHz, and the segment DAC architecture. According to the Texas Instruments PCM1792 product page, the device includes support circuitry in a compact 28-lead SSOP package. Its differential outputs allow the output topology to be optimized for the intended analog stage, while the specified dynamic range and THD+N figures support high-fidelity audio equipment.
Clock jitter tolerance is another important aspect of the PCM1792 architecture. Texas Instruments describes the converter as using advanced segment DAC architecture to achieve strong dynamic performance and improved tolerance to clock jitter. In practice, that makes the device suitable for systems in which the digital audio clock and data paths require careful implementation to preserve the converter’s low-distortion performance.
Typical uses include CD and DVD player digital-to-analog sections, professional audio equipment, home-theater receivers, digital mixing consoles, and other stereo audio products. The 24-bit, 192kHz conversion capability accommodates high-resolution source material, while the balanced current-output architecture is especially suitable for designs that require flexible analog filtering and gain staging.
When designing around the PCM1792DBR, follow the manufacturer datasheet for the external clock, digital interface, output network, filtering, power-supply, and grounding configuration. Correct implementation of the output current-to-voltage conversion and the required bypass capacitors is fundamental to preserving the specified dynamic range and distortion performance.
This page organizes the PCM1792DBR’s key specifications, practical application fit, package information, comparison parameters, and engineering guidance into a design-focused reference for engineers evaluating stereo DAC implementations.
Pilihan pengganti yang segera untuk PCM1792DBR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PCM1792DBR (sama faktor bentuk dan kaki) — berbeza dalam Maximum Sampling Rate, Package, DAC Architecture, Process Technology, Clock Jitter Tolerance.
PCM1794DBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PCM1795DBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PCM1796DBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PCM1797DBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PCM1798DBR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PCM1792DBR Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Stereo digital-to-analog converter |
| Pemecahkatan | 24 bit |
| Maximum Sampling Rate | 192kHz |
| Dynamic Range, 9Vrms Mono | 132dB |
| Dynamic Range, 4.5Vrms Stereo | 129dB |
| Dynamic Range, 2Vrms Stereo | 127dB |
| THD+N | 0.0004% |
| Differential Output Current | 7.8mA peak-to-peak |
| Digital Oversampling | 8 times |
| Output Architecture | Balanced differential current output |
| DAC Architecture | Advanced segment DAC |
| Kemasan | 28-lead SSOP |
| Suhu Operasi | -25C to +85C |
| Digital Audio Interface | PCM audio data interface |
| DSD Support | Supported |
| Sampling Control | Software control |
Panduan Konfigurasi Pin PCM1792DBR 28-lead ssop
Konfigurasi pin untuk PCM1792DBR (28-lead ssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk PCM1792DBR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PCM1792DBR patut untuk 6 aplikasis: High-Resolution CD Player, Professional Audio Monitor Controller, Home-Theater Audio Receiver, Digital Mixing Console, Digital Audio Interface and DAC Card, Studio Recording Monitor DAC.
High-Resolution CD Player
PCM1792DBR fits a high-resolution CD-player output stage because it combines 24-bit conversion, operation up to 192kHz, and a dynamic range of 132dB in mono at 9Vrms. Its differential 7.8mA peak-to-peak current outputs allow the designer to optimize the conversion network for either balanced or single-ended downstream amplification. The low THD+N rating of 0.0004% is particularly useful when preserving small musical signals. Implement the manufacturer’s reference network to translate the current outputs into a usable line-level voltage, and provide clean supplies and controlled clocking to preserve the specified performance.
Disebarkan
Professional Audio Monitor Controller
PCM1792DBR can serve as the stereo conversion stage in a professional monitor controller requiring a wide dynamic range and low distortion. Its 129dB stereo dynamic range at 4.5Vrms and 0.0004% THD+N provide useful margin for level adjustment, mixing, and precision monitoring. The balanced differential current-output architecture supports a symmetrical analog signal path and reduces the need for an early conversion to single-ended voltage. Designers should follow the datasheet output-filter topology and control return-current paths carefully, since the external current-to-voltage network and supply arrangement strongly influence the usable noise and distortion performance.
Disebarkan
Home-Theater Audio Receiver
PCM1792DBR is suitable for a home-theater receiver’s stereo DAC path when the design targets high-resolution PCM sources and low distortion. Its support for sampling rates up to 192kHz and 24-bit conversion matches common high-resolution audio streams, while the 127dB stereo dynamic range at 2Vrms provides a compact-design operating point. Differential current outputs can feed a balanced analog volume-control or line-output stage. Because the receiver also includes multichannel audio, clock isolation and ground partitioning become important: use the manufacturer interface timing, decoupling, and output-network guidance rather than treating the DAC as an isolated component.
Disebarkan
Digital Mixing Console
PCM1792DBR can support monitoring and auxiliary-output channels in a digital mixing console where a clean stereo conversion stage is required. The 24-bit resolution and 129dB stereo dynamic range at 4.5Vrms are useful for retaining low-level details across mixing and monitoring functions, while the differential current-output architecture supports a balanced routing design. The converter also specifies 8-times oversampling for its digital filtering, helping place the manufacturer-recommended reconstruction filters within the signal chain. Keep data and clock routing away from sensitive analog nodes, terminate interfaces according to the system design, and validate grounding across multiple converter channels.
Disebarkan
Digital Audio Interface and DAC Card
PCM1792DBR is appropriate for a modular digital-audio interface and DAC card that must convert high-resolution PCM data into a balanced analog output. Its 192kHz maximum sampling rate accommodates high-rate source material, and its 132dB mono dynamic-range condition provides substantial headroom for demanding listening environments. Because the outputs are differential currents, the board should provide a carefully engineered current-to-voltage stage rather than treating the DAC pins as conventional voltage outputs. Use short analog paths, local bypass capacitors, a low-noise reference implementation, and clock routing that minimizes jitter coupling into the converter.
Disebarkan
Studio Recording Monitor DAC
PCM1792DBR fits a studio recording monitor DAC where low distortion and accurate dynamic-range performance are central requirements. Its 0.0004% THD+N and 129dB stereo dynamic range at 4.5Vrms provide a strong starting point for near-field monitors, reference playback, and powered-speaker controller outputs. Differential current outputs allow a direct balanced conversion path, which can simplify downstream amplifier matching. However, low system noise still depends on the analog network, analog and digital supply separation, grounding, and clock quality. Use the Texas Instruments reference circuit and component values as the baseline before optimizing output filters or adding gain stages.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PCM1792DBR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PCM1794DBR | PCM1795DBR | PCM1796DBR | PCM1797DBR | PCM1798DBR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-lead SSOP | 28-lead SSOP - same | 28-lead SSOP - same | 28-lead SSOP - same | 28-lead SSOP - same | 28-lead SSOP - same |
| Product Type | Stereo DAC | Stereo DAC | Stereo DAC | Stereo DAC | Stereo DAC | Stereo DAC |
| Maximum Sampling Rate | 192kHz | 192kHz | 192kHz | 192kHz | 192kHz | 192kHz |
Penyeberangsung Jelas
- High mono dynamic range (vsPCM1794DBR)
- Low stereo distortion (vsPCM1795DBR)
- High-resolution stereo conversion (vsPCM1796DBR)
- Balanced differential current output (vsPCM1797DBR)
Catatan Desain
Place the PCM1792DBR output-current-to-voltage network close to the device and keep the differential output traces short, symmetric, and away from digital clock and data routing. Maintain continuous ground references under the analog section and use separate return paths for output currents. This layout discipline is important because the specified 132dB mono and 129dB stereo dynamic range cannot be preserved if output-current noise or ground interference reaches the reconstruction network.
Implement the analog and digital supply networks with the component values and separation shown in the manufacturer reference design. Place bypass capacitors at the corresponding supply pins with short ground returns, and keep high-current switching or processor supplies away from the DAC output stage. The 2Vrms, 4.5Vrms, and 9Vrms performance conditions use different supply scenarios, so verify the selected operating point against the appropriate datasheet limits and thermal conditions.
Route the PCM audio data, system clock, and master clock according to the interface timing and impedance requirements in the Texas Instruments PCM1792 datasheet. Avoid long stubs, unnecessary vias, and routing digital signals beneath the analog output network. Because improved clock-jitter tolerance is a core architectural benefit, isolate or buffer jitter-sensitive clocks appropriately and validate the complete digital-to-analog path with an oscilloscope or audio analyzer.
Do not connect the differential current outputs as if they were conventional voltage outputs. Use the required current-to-voltage conversion, reconstruction filtering, and downstream amplification methods. Also verify the exact PCM1792DBR pin assignment before PCB release, particularly the mode-control, system-clock, data, and output connections. A package-compatible family member should not be substituted solely because all members use a 28-lead SSOP enclosure.
Maklumat Kesediaan
The manufacturer product page and snippets do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for PCM1792DBR. AEC-Q100 qualification is not indicated for this consumer audio DAC.