PCM5242RHBR - 32-Bit 384kHz Stereo DAC | Texas Instruments
MPN: PCM5242RHBR ✓ AktifPCM5242RHBR Ringkasan
An audio DAC is a semiconductor that converts digital PCM samples into an analog audio signal. The PCM5242 belongs to the digital-to-analog converter family within interface and signal-conversion integrated circuits, supporting stereo audio playback in consumer, communications, industrial, and test equipment. Its differential outputs help reject common-mode noise and support balanced analog output stages when paired with suitable downstream circuitry.
The PCM5242 uses TI's advanced segment-DAC architecture to provide 32-bit resolution, operation up to 384 kHz, and 114 dB dynamic range. The device integrates a programmable miniDSP core, allowing designers to apply signal-processing functions without requiring a separate processor for common audio filtering and conditioning tasks. The 4.2-VRMS DirectPath architecture is intended to simplify output-stage integration while maintaining high linearity and low distortion.
The integrated PCM interface supports digital audio data transfer, while the DAC architecture provides the conversion function for stereo playback systems. Its differential outputs are suitable for professional audio, multimedia equipment, digital active speakers, USB and network-audio products, and instrumentation requiring a high-resolution stereo analog output. The compact QFN package supports dense PCB layouts, although careful decoupling and analog-output routing remain important.
Designers should pay close attention to the supply rails, clock source, digital interface timing, and output configuration in the manufacturer datasheet. The DAC output stages should be routed away from noisy switching nodes and digital clock signals, while the power and ground connections should use low-impedance planes or carefully placed decoupling capacitors. Differential output filtering and analog gain staging determine the final system noise and distortion performance.
This PCM5242RHBR product record combines the manufacturer's key device specifications, package information, sourcing guidance, and practical application considerations. It is suitable for engineers evaluating a stereo DAC for high-resolution playback, audio processing, communications equipment, or embedded audio platforms.
Pilihan pengganti yang segera untuk PCM5242RHBR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifPCM5242RHBR Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Stereo differential-output audio DAC |
| Pemecahkatan | 32 bit |
| Maximum Sample Rate | 384 kHz |
| Dynamic Range | 114 dB |
| Jenis Output | Differential |
| Tegangan Output | 4.2 VRMS |
| DAC Architecture | Segment-DAC architecture |
| Digital Interface | PCM interface |
| Programmable DSP | Integrated miniDSP core |
| Tegangan Pemberi Arus | 3.3 V |
| Maximum Supply Current | 32 mA |
| Gambaran Suhu Operasi | -25 C to +85 C |
| Package Type | 32-VQFN (RHB) |
| Package Dimensions | 5 x 5 mm |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin PCM5242RHBR 5 x 5 mm
Konfigurasi pin untuk PCM5242RHBR (5 x 5 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk PCM5242RHBR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PCM5242RHBR patut untuk 6 aplikasis: Professional Stereo Audio Conversion, Network and USB Audio, Digital Active Speakers, Multimedia Playback Equipment, Communications and Voice Terminals, Test and Measurement Audio.
Professional Stereo Audio Conversion
PCM5242RHBR fits professional stereo playback and monitoring equipment that needs 32-bit resolution, operation up to 384 kHz, and 114 dB dynamic range. Its differential outputs can feed a balanced input stage with low common-mode sensitivity. The integrated miniDSP supports programmable filtering or signal conditioning, reducing the need for separate DSP hardware. The principal design checks are clock jitter, output loading, analog gain, and keeping the 5x5 mm QFN power connections close to their bypass components.
Disebarkan
Network and USB Audio
Network-audio and USB-audio products can use PCM5242RHBR to create a high-resolution stereo analog output from a digital audio stream. The 384-kHz capability accommodates high-rate source material, while differential outputs support a balanced receiver or line-output stage. The miniDSP core is useful for implementing filters and equalization close to the converter. Engineers should verify the supported digital format, clock architecture, and ground separation between the digital interface and analog output domain.
Disebarkan
Digital Active Speakers
PCM5242RHBR is suitable for digital active-speaker controllers that require a compact, high-performance stereo DAC. Its 32-VQFN package preserves board area, and the 114 dB dynamic range provides useful headroom for music reproduction. Differential outputs can connect directly to an appropriately designed speaker amplifier input stage. Because the DAC does not replace the power amplifier, the design must still establish correct output gain, protection, filtering, and thermal margin in the downstream amplifier.
Disebarkan
Multimedia Playback Equipment
PCM5242RHBR can provide the stereo analog output stage for premium multimedia devices, game consoles, and home-audio playback products. Its 32-bit conversion, 4.2-VRMS DirectPath output, and differential output topology support a high-quality signal path without requiring a large discrete output ladder. The programmable miniDSP may implement tone control, filters, or level adjustment. Board-level success depends on clean supply routing, controlled clocking, and appropriate output filtering.
Disebarkan
Communications and Voice Terminals
PCM5242RHBR can serve as the high-resolution playback path in communications terminals, conferencing systems, and audio gateways. Differential outputs help preserve signal integrity when routed through a balanced audio connector or analog receiver, while the miniDSP allows programmable channel processing. The interface and clock configuration must match the system audio source, and the DAC should not be treated as a general-purpose codec. Confirm channel timing, supported sample rates, and analog output specifications in the manufacturer datasheet.
Disebarkan
Test and Measurement Audio
PCM5242RHBR can be used in audio test equipment, signal generators, and automated measurement products requiring precise digital-to-analog conversion. The 32-bit resolution and 384-kHz sample rate support detailed waveform generation, while the programmable miniDSP enables customized signal shaping. Differential outputs can improve rejection of common-mode interference in balanced test paths. Calibration, reference-clock accuracy, output bandwidth, and distortion measurement must be evaluated as part of the complete instrument design.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PCM5242RHBR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Catatan Desain
Place the required bypass capacitors directly beside the PCM5242RHBR supply and ground pins, and provide low-impedance return paths for both analog and digital currents. Keep switching-regulator nodes, high-current logic nets, and clock traces away from the differential output region. Because the package is only 5 x 5 mm, inspect the manufacturer's land pattern and exposed-pad assembly requirements before releasing a PCB footprint.
Route the two differential outputs as a matched pair with continuous ground reference and avoid crossings beneath noisy digital buses. Use the manufacturer-recommended output network and account for the capacitance and loading of the next analog stage. The 32-bit, 384-kHz capability supports very low quantization noise, but actual channel balance and distortion still depend on PCB symmetry, grounding, clock quality, and analog gain-stage design.
Do not assume that every PCM interface accepts every serial audio format or clock arrangement. Confirm supported modes, sample rates, word lengths, and master or slave operation in the TI datasheet before connecting the source. Also avoid substituting a similarly named PCM5242 package suffix without checking reel orientation, pin compatibility, exposed-pad requirements, and the exact orderable part number.
Design the analog and digital supply paths around the PCM5242RHBR's 3.3-V operating condition and 32-mA maximum supply-current listing. Keep regulator output impedance and supply ripple appropriate for the required noise floor. If a separate analog supply is used, verify the allowable sequencing and voltage relationships in the manufacturer documentation rather than assuming that any rail order is safe.
Maklumat Kesediaan
Compliance attributes were not stated in the available product information and remain unknown.