PIC16C662T-20E/L - 8-bit OTP MCU, 20MHz, 44-PLCC | Microchip
MPN: PIC16C662T-20E/L ✗ Akhir HayatPIC16C662T-20E/L Ringkasan
A PIC microcontroller (Programmable Interface Controller) is a compact, low-cost RISC-based computing device that integrates a CPU, memory (program ROM/RAM), and programmable peripherals onto a single silicon die. Within the broader taxonomy, PIC16C662 belongs to the 8-bit microcontroller -> microcontroller unit (MCU) -> embedded controller -> semiconductor hierarchy. The PIC16C family uses a Harvard architecture with separate program and data buses, enabling single-cycle instruction execution and deterministic interrupt response - a hallmark of Microchip's mid-range MCU lineup.
Key features of the PIC16C662T-20E/L include 7KB OTP program memory (4K x 14-bit words), 176 bytes of general-purpose RAM, 33 digital I/O pins, an integrated analog-to-digital converter, and multiple timer/counter peripherals. The 20 MHz oscillator provides 200 ns instruction cycle time, supporting responsive control loops in real-time systems. The 44-pin PLCC package offers socket-compatible mounting suitable for legacy industrial and automotive designs.
The device employs a RISC instruction set with only 35 single-word instructions, simplifying firmware development and accelerating time-to-market. Internal peripherals typically include capture/compare/PWM modules, a USART for asynchronous serial communication, and synchronous serial port (SSP) support for SPI/I2C. Brown-out reset (BOR) and watchdog timer (WDT) enhance system reliability in noisy electrical environments.
Typical applications include industrial control systems, automotive body and chassis electronics, appliance controllers, HVAC interface modules, and legacy embedded products requiring field-proven OTP-based firmware storage. The automotive temperature grade (-40C to +125C) and OTP memory make it especially suitable for cost-sensitive high-volume production where in-circuit reprogramming is unnecessary.
When designing with this MCU, allocate sufficient PCB real estate for the 44-pin PLCC socket footprint (16.59 x 16.59 mm land pattern with J-lead pads). The OTP memory requires one-time programming - design firmware carefully and validate on windowed or flash-based equivalents first. Ensure oscillator start-up time and POR/BOR timing match your application's power-rail profile.
This page synthesizes distributor pricing from DigiKey/Mouser, drop-in alternatives from the same PIC16C66x family, and practical design notes not consolidated in the Microchip datasheet. Cross-brand flash equivalents are noted where applicable for designers needing in-circuit reprogrammability.
Pilihan pengganti yang segera untuk PIC16C662T-20E/L — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC16C662T-20E/L (sama faktor bentuk dan kaki) — berbeza dalam Program Memory Type, Mounting Type, Program Memory Size, Core, Data RAM.
PIC16C662T-10E/L
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
PIC16C662-10E/L
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →PIC16C662T-20E/L Penilaian maksimum & Ciri-ciri Elektrik
| Core | PIC16C 8-bit RISC |
| Program Memory Type | OTP (One-Time-Programmable) |
| Program Memory Size | 7 KB (4K x 14 words) |
| RAM Size | 176 bytes |
| Frekuensi Klock Maksimum | 20 MHz |
| Instruction Cycle Time | 200 ns |
| I/O Pins | 33 |
| ADC | Integrated (exact) |
| Kemasan | 44-pin PLCC (16.59 x 16.59 mm) |
| Terminal Form | J BEND (J-lead) |
| Package Code | QCCJ |
| Jenis Pemasangan | Surface Mount |
| Temperature Grade | Automotive |
| Suhu Operasi | -40C to +125C |
| Instruction Set | 35 single-word instructions |
| Architecture | Harvard (separate program/data buses) |
Panduan Konfigurasi Pin PIC16C662T-20E/L qccj
Konfigurasi pin untuk PIC16C662T-20E/L (qccj pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC16C662T-20E/L.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC16C662T-20E/L patut untuk 6 aplikasis: Automotive Body and Chassis Controllers, Industrial Control and HMI Panels, Appliance Control Modules, Legacy Embedded Product Sustainment, Security and Access Control Panels, Consumer Electronics Remote and Sensor Hubs.
Automotive Body and Chassis Controllers
The PIC16C662T-20E/L's automotive temperature grade (-40C to +125C), OTP memory cost advantage, and 33 I/O pins make it well suited for automotive body controllers (window lift, seat control, mirror adjustment) and chassis modules where firmware is fixed and unit cost dominates the BOM. The 20 MHz clock delivers responsive control loops for motor PWM and switch debouncing. With 7KB of program memory, developers can implement CAN-style software protocols, sensor conditioning, and actuator drivers on a single chip. Unlike flash parts, the OTP cost is 20-30% lower at volume, which is critical for parts shipping >100K/year. The 44-pin PLCC package supports socketed field service for legacy vehicle platforms.
Disebarkan
Industrial Control and HMI Panels
Industrial control panels, HVAC interface modules, and machine-operator HMI terminals benefit from the PIC16C662T-20E/L's robust peripheral set: integrated ADC for analog sensor input (temperature, pressure, flow), PWM outputs for motor or valve control, and USART for communication with upstream PLCs or display controllers. The 33 I/O pins accommodate keypads, LED indicators, and relay drivers without external I/O expanders. Industrial-grade temperature tolerance and brown-out reset ensure reliable operation on factory power rails with significant noise and sag. The Harvard architecture and deterministic interrupt latency provide the predictable timing required for safety interlocks and alarm handling in process automation.
Disebarkan
Appliance Control Modules
White goods and small appliance controllers (washing machines, dishwashers, microwave ovens, coffee machines) are a classic application for the PIC16C662T-20E/L because OTP memory drives down production cost while the 20 MHz core handles user-interface scanning, motor control, and sensor processing in real time. The 176 bytes of RAM accommodate state machines for wash cycles or cooking profiles without external memory. Integrated ADC channels monitor thermistors, water level sensors, and motor current for closed-loop control. The 33 I/O pins drive 7-segment displays, keypads, buzzer, relay coils, and triac interfaces directly. The automotive-grade temperature spec survives the heat envelope behind a dishwasher motor or inside a microwave oven chassis.
Disebarkan
Legacy Embedded Product Sustainment
For manufacturers maintaining fielded products with installed PIC16C662T-20E/L units, the OTP memory and identical-package PLCC-44 form factor enable drop-in service replacements without redesigning the PCB. Field service technicians can swap a programmed PIC16C662T-20E/L into a 44-pin PLCC socket on legacy boards. The 7KB OTP capacity supports continued production of working firmware images for warranty repairs. While new designs should migrate to flash-based PIC16F662, sustainment programs for medical, military, or industrial equipment with 10-20 year lifecycles continue to source this part for service stock. The automotive temperature grade ensures compatibility with fielded units exposed to harsh environments.
Disebarkan
Security and Access Control Panels
Access control keypads, alarm panel keypads, and small security-system controllers use the PIC16C662T-20E/L for its low cost, robust I/O count, and OTP code security. The 33 I/O pins support 4x4 keypads, multiple LED zone indicators, relay outputs for door strikes, and serial links to central panels. With 7KB of program memory, the device can run keypad scan algorithms, PIN validation, tamper detection, and event logging. The Harvard architecture's deterministic interrupt response ensures prompt alarm-trigger handling. OTP memory provides inherent code protection - once programmed, the firmware cannot be read back, making reverse engineering of proprietary security algorithms more difficult.
Disebarkan
Consumer Electronics Remote and Sensor Hubs
Universal remote controls, IR/RF sensor hubs, and consumer peripherals can leverage the PIC16C662T-20E/L's 20 MHz performance and 33 I/O pins to handle multi-protocol decoding, button scanning, and status LED driving in a single chip. The integrated ADC supports battery voltage monitoring for low-battery alerts. With 176 bytes of RAM, the MCU can buffer multi-byte IR protocols (RC5, NEC, Sony SIRC) without external memory. OTP memory keeps the bill-of-materials cost under $1 in volume, enabling $10 retail price points for universal remotes. The automotive temperature spec ensures reliability in any indoor environment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC16C662T-20E/L — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | PIC16C662T-10E/L | PIC16C662-10E/L | PIC16C662T-10I/PQ | PIC16C662-20E/PT | PIC16C662-20I/P | PIC16C662-04I/P |
|---|---|---|---|---|---|---|---|
| Package | 44-PLCC (16.59x16.59 mm) | 44-PLCC - same | 44-PLCC - same | 44-PQFP - different | 44-TQFP - different | 40-PDIP - different | 40-PDIP - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 20 MHz | 10 MHz | 10 MHz | 10 MHz | 20 MHz | 20 MHz | 4 MHz |
| Program Memory | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP | 7 KB OTP |
| RAM Size | 176 bytes | 176 bytes | 176 bytes | 176 bytes | 176 bytes | 176 bytes | 176 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
| Temperature Grade | Automotive (-40C to +125C) | Automotive | Extended | Industrial | Extended | Industrial | Industrial |
| Memory Type | OTP | OTP | OTP | OTP | OTP | OTP | OTP |
| Core Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
Penyeberangsung Jelas
- OTP memory for low per-unit cost at high volume (vsPIC16F662-I/L (flash equivalent))
- Automotive temperature grade (-40C to +125C) as standard (vsPIC16C662T-10I/L (industrial grade))
- 44-pin PLCC socket-compatible legacy footprint (vsPIC16C662-20E/PT (TQFP-44))
Catatan Desain
Estimated: The 44-pin PLCC package (16.59 x 16.59 mm) requires a J-lead PCB land pattern with approximately 1.0 mm lead pitch. Use a PLCC socket (e.g., 3M 8444-ND) for development boards to enable easy OTP device swaps during firmware validation. For production boards, solder the PLCC directly with standard J-lead reflow profiles (peak 245C, 60 sec above 220C) following JEDEC J-STD-020 MSL classification.
Estimated: The PIC16C662T-20E/L operates from 4.0V to 6.0V (typical 5V) supply; check datasheet exact voltage range for production. Place a 100 nF decoupling capacitor as close as possible to the VDD pin and a 10 uF bulk capacitor at the board supply entry. The brown-out reset (BOR) circuit prevents code execution at marginal voltages - configure BOR voltage threshold in configuration bits to match your application's power-rail profile.
OTP memory cannot be erased or rewritten - once programmed, the firmware is permanent. Always validate firmware on a flash-based equivalent (PIC16F662-I/L) before committing to PIC16C662T-20E/L for production programming. Use windowed PIC16C662 variants for prototype validation if the flash part is not available, then transfer the validated hex file to OTP for production. Plan programming lead time (typically 2-4 weeks at volume) into your production schedule.
Estimated: Place the external crystal/ceramic resonator within 5 mm of the OSC1/OSC2 pins with short, symmetrical traces to minimize parasitic capacitance. Use a series resistor (typically 100 ohm to 1 kohm) with ceramic resonators to dampen overdrive. For noise-sensitive analog inputs (ADC), route analog signals away from digital switching traces and use a ground guard ring around sensitive analog traces. MCLR pin requires a 10 kohm pull-up to VDD for normal operation.
Maklumat Kesediaan
RoHS and REACH compliance per DigiKey product listing. Automotive temperature grade (-40C to +125C) is standard but not formally AEC-Q100 qualified; for AEC-Q100 qualified equivalent, refer to PIC16F662 family. Lead-free reflow compatible per JEDEC J-STD-020.
