PIC24FJ64GL302-I/MV - 16-Bit XLP LCD MCU | Microchip
MPN: PIC24FJ64GL302-I/MV ✓ AktifPIC24FJ64GL302-I/MV Ringkasan
A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The PIC24F hierarchy places this device among 16-bit embedded control devices, while its low-power design, display-driver peripherals, and battery-focused features position it for portable electronic instruments. Core independent peripherals, or CIPs, allow selected display and timing functions to operate independently of the main CPU.
The PIC24FJ64GL302-I/MV combines 64 KB of ECC Flash with 8 KB of data RAM and a 16 MIPS execution rate. Its integrated LCD controller supports eight common lines and as many as 32 segment outputs, enabling 256 segments. Autonomous animation reduces display-update work in the main application. The charge pump supports contrast management in battery-powered equipment where an external LCD bias supply would increase board area and power consumption.
EEPROM-style program data protection is provided by ECC Flash technology, while the family architecture supports retention of complete RAM contents during sleep. Sleep current can reach a few hundred nanoseconds according to the Microchip family description. The peripheral set supports applications requiring serial communication, general-purpose I/O, timing, and dedicated LCD drive functions without requiring an external display driver.
Typical uses include digital multimeters, compact industrial meters, handheld test equipment, battery-powered monitors, medical monitoring instruments, and other portable products with segment LCD displays. A 28-pin surface-mount package supports compact layouts, while the industrial temperature grade of -40 °C to +85 °C supports consumer, industrial, and instrumentation designs operating across extended ambient conditions.
PCB design should preserve the pinout and exposed-pad requirements shown in the manufacturer package drawing. Place bypass capacitors close to the supply pins, route LCD segment and common outputs away from high-current switching edges, and maintain adequate ground return paths. Validate contrast, glass bias, wake behavior, and continuous LCD drive time in the final mechanical enclosure.
This product page combines the manufacturer feature description with packaging, application, purchasing, and replacement guidance. It also distinguishes true pin-compatible substitutions from related package variants, helping engineers make a safer decision when upgrading or consolidating a low-power LCD-based design.
Pilihan pengganti yang segera untuk PIC24FJ64GL302-I/MV — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera PIC24FJ64GL302-I/MV (sama faktor bentuk dan kaki) — berbeza dalam Package, Operating Temperature, CPU Architecture, Core Architecture, LCD Charge Pump.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifPIC24FJ64GL302-I/MV Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Family | PIC24F |
| CPU Architecture | 16-bit PIC24 RISC |
| Maximum Performance | 16 MIPS |
| Program Memory | 64 KB ECC Flash |
| Data Memory | 8 KB RAM |
| Operating Voltage | 2.0 V to 3.6 V |
| LCD Common Outputs | 8 |
| LCD Segment Outputs | Up to 32 |
| Maximum LCD Segment Count | 256 segments |
| LCD Charge Pump | Integrated |
| Autonomous LCD Animation | Supported |
| Sleep Current | Down to a few hundred nA |
| RAM Retention During Sleep | Complete RAM content retained |
| Kemasan | 28-pin UQFN |
| Jenis Pemasangan | Surface Mount |
| Suhu Operasi | -40 °C to +85 °C |
| ADC Resolution | 10-bit or 12-bit |
| Development Support | MPLAB Code Configurator (MCC) |
Panduan Konfigurasi Pin PIC24FJ64GL302-I/MV 28-pin uqfn
Konfigurasi pin untuk PIC24FJ64GL302-I/MV (28-pin uqfn pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk PIC24FJ64GL302-I/MV.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
PIC24FJ64GL302-I/MV patut untuk 6 aplikasis: Handheld Digital Multimeter, Battery-Powered Industrial Meter, Portable Medical Monitor, Low-Power Data Acquisition Unit, Battery-Powered Sensor Display, Compact Test and Measurement Display.
Handheld Digital Multimeter
The PIC24FJ64GL302-I/MV fits a handheld digital multimeter because its segmented LCD controller can operate up to 256 segments across eight common lines while autonomous animation handles blinking indicators without continuous CPU work. The 16-bit architecture and 64 KB ECC Flash provide room for measurement routines, calibration data, and a responsive user interface. Low sleep current helps preserve battery life between measurements, while complete RAM retention allows the instrument to resume quickly. The 28-pin UQFN package also supports compact handheld layouts.
Disebarkan
Battery-Powered Industrial Meter
The PIC24FJ64GL302-I/MV is well suited to battery-powered industrial meters that combine a numeric segment display with status indicators. Its 2.0 V to 3.6 V operating range supports low-voltage systems, and the integrated LCD charge pump simplifies display bias generation. Autonomous blinking, blanking, and alternating display modes can communicate alarms without continuously refreshing every segment. The -40 °C to +85 °C grade supports equipment used across extended industrial environments when the complete product passes its own environmental qualification.
Disebarkan
Portable Medical Monitor
A compact medical monitoring display can use the PIC24FJ64GL302-I/MV to manage a segmented LCD while retaining measurement state in RAM during low-power operation. The 16-bit core supports signal-processing and control routines, and the 64 KB ECC Flash supports firmware, calibration tables, and configuration parameters. Autonomous LCD animation provides clear visual cues for alarms or status transitions. Low sleep current is valuable in recurring-measurement products, although medical-system validation and regulatory requirements remain the responsibility of the finished device.
Disebarkan
Low-Power Data Acquisition Unit
The PIC24FJ64GL302-I/MV can serve as the control and display MCU in a low-power data-acquisition unit with a segment LCD. Its 8 KB RAM accommodates working data, while 64 KB ECC Flash holds the application, acquisition control, and configuration code. The integrated LCD charge pump and autonomous animation reduce display-controller overhead and external circuitry. The PIC24FJ64GA702 family may be considered when a design prioritizes a 12-bit ADC and larger memory, but it should be evaluated independently because its display architecture and exact package configuration differ.
Disebarkan
Battery-Powered Sensor Display
The PIC24FJ64GL302-I/MV is appropriate for a battery-operated sensor node that needs a local segment display without a continuous high-power processor workload. The MCU can retain complete RAM content during sleep, allowing sensor values and operating state to remain available before wake-up. Up to 256 LCD segments provide room for numerical readings, units, status icons, and bar graphs. Autonomous animation can refresh warning indicators independently, improving both usability and power efficiency in compact environmental or industrial sensing products.
Disebarkan
Compact Test and Measurement Display
The PIC24FJ64GL302-I/MV can act as the user-interface controller for a compact test instrument with a segmented display. Its 16 MIPS performance supports responsive menu, measurement, and logging functions, while 64 KB ECC Flash provides sufficient program storage for embedded firmware. Eight common LCD outputs and up to 32 segment outputs support information-dense instruments, and autonomous animation provides clear measurement-status feedback. The 28-pin UQFN package helps reduce board area while the low-power sleep behavior supports longer operation between charges.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk PIC24FJ64GL302-I/MV — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | Microchip Technology |
| Package | 28-pin UQFN |
| CPU Architecture | 16-bit PIC24 RISC |
| Maximum Performance | 16 MIPS |
| Program Memory | 64 KB ECC Flash |
| Data Memory | 8 KB RAM |
| Operating Voltage | 2.0 V to 3.6 V |
| Maximum LCD Segments | 256 segments |
| Operating Temperature | -40 °C to +85 °C |
Penyeberangsung Jelas
- Integrated high-capacity segmented LCD control (vsPIC24FJ64GA702)
- Low-power state retention for portable products (vsPIC24FJ64GL302-I/ML)
- Integrated display bias support (vsPIC24FJ64GL302-I/SO)
Catatan Desain
Route the LCD common and segment outputs away from switching nodes, high-current return paths, and antenna structures. Use a continuous ground plane beneath the device where package rules permit, and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Verify the exposed-pad connection and thermal-via pattern against the official package drawing before releasing artwork.
Design the supply rail for the 2.0 V to 3.6 V operating range and account for LCD charge-pump, analog, and digital load when sizing power capacity. Use the low-power modes intentionally: retain required RAM state, disable unused peripherals, and control LCD drive duty according to the manufacturer guidance. Validate worst-case startup, display contrast, and brownout behavior across battery voltage and temperature.
Do not substitute a related ordering code solely because the base device number matches. The /MV, /ML, and /SO suffixes can identify different package dimensions, pin assignments, and exposed-pad arrangements. Confirm the complete package drawing, LCD channel mapping, supply pins, and programming configuration for every proposed alternate, and perform a hardware comparison before production release.
Segment and common outputs are physically long conductive paths on a glass display and can pick up noise from nearby circuitry. Keep the LCD connector and glass routing away from motor, relay, charger, and high-speed switching traces. Add a series resistor where the manufacturer interface specifies one, and inspect display contrast and ghosting across all operating modes using the final enclosure and cable arrangement.
Place the MCU, decoupling network, and LCD interface in a predictable signal-flow arrangement. Reserve unobstructed copper access around the 28-pin UQFN pads and provide adequate assembly clearance for fine-pitch components. Avoid placing test points or enclosure hardware over the exposed thermal pad, and follow the manufacturer's land-pattern dimensions rather than deriving a footprint solely from the UQFN name.
Maklumat Kesediaan
The industrial-temperature ordering code does not by itself establish AEC-Q100 qualification. Compliance documents should be checked for the exact package and ordering option.