R5F100MLDFB#30 - 32MHz 512KB RL78/G13 MCU | Renesas
MPN: R5F100MLDFB#30 ✓ AktifR5F100MLDFB#30 Ringkasan
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. The RL78 family belongs to the broader embedded-controller hierarchy, where an MCU executes firmware for sensing, control, communication, and automation. Renesas describes the RL78/G13 series as low-power, high-function devices intended for general-purpose applications.
The R5F100MLDFB#30 operates at up to 32 MHz and delivers 43.2 DMIPS while consuming 66 uA/MHz during CPU operation. Its STOP-mode standby current is 230 nA. These figures make the device suitable for battery-powered appliances, compact instruments, and control modules that spend substantial time between active processing periods. The 512 KB program-memory capacity provides room for application firmware and embedded control logic.
The integrated feature set includes an on-chip oscillator, data flash, and an A/D converter. The on-chip oscillator simplifies clock implementation, while data flash supports nonvolatile parameter storage and the A/D converter provides a path for measuring analog inputs. Hardware detection of illegal operation adds a safety mechanism relevant to appliance and industrial control systems.
Typical uses include household appliances, temperature and environmental controllers, compact sensor nodes, motor-control subsystems, and low-power embedded products. The combination of 32 MHz performance, 512 KB flash, and low standby current allows one MCU to consolidate control functions that might otherwise require several discrete components.
Designers should evaluate the 80-LFQFP footprint, pin allocation, power rails, analog-input requirements, and peripheral mix before finalizing a PCB. The -40 to +85 C temperature range supports industrial-temperature operation, while the low-power operating modes should be configured carefully to balance response time against energy use.
This product overview combines the exact ordering information, core operating characteristics, package details, low-power attributes, and application guidance engineers need when evaluating the R5F100MLDFB#30 for a new embedded design.
Pilihan pengganti yang segera untuk R5F100MLDFB#30 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
R5F100MLDFB#V0
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F100MLDFB#X0
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F100MLDFB#50
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F100MLDFB#30 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit microcontroller IC |
| Series | RL78/G13 |
| CPU Clock | 32 MHz |
| Core Performance | 43.2 DMIPS at 32 MHz |
| Flash Memory | 512 KB (512K x 8) |
| CPU Operating Current | 66 uA/MHz |
| STOP Mode Standby Current | 230 nA |
| ADC | On-chip A/D converter |
| Data Flash | On-chip data flash |
| Oscillator | On-chip oscillator |
| Hardware Safety | Illegal-operation detection function |
| Suhu Operasi | -40 C to +85 C |
| Kemasan | 80-LFQFP, 12 x 12 mm |
| Kiraan Pin | 80 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin R5F100MLDFB#30 80-lfqfp, 12 x 12 mm
Konfigurasi pin untuk R5F100MLDFB#30 (80-lfqfp, 12 x 12 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk R5F100MLDFB#30.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
R5F100MLDFB#30 patut untuk 6 aplikasis: Household Appliance Control, Industrial Sensor Controller, Battery-Powered Instrument, Temperature and Environmental Monitor, Compact Motor and Relay Control, General-Purpose Embedded Control Module.
Household Appliance Control
The R5F100MLDFB#30 fits appliance-control boards that combine timing, user inputs, motor sequencing, and analog sensing in one MCU. Its 16-bit RL78/G13 core operates at up to 32 MHz and provides 43.2 DMIPS, while 512 KB of flash leaves room for control algorithms, state machines, diagnostics, and communication routines. The on-chip A/D converter supports temperature, level, or potentiometer measurements without requiring a separate analog front end. Renesas' illegal-operation detection function adds hardware-level protection against invalid operating states, making the device appropriate for safety-conscious appliance designs.
Disebarkan
Industrial Sensor Controller
The R5F100MLDFB#30 is appropriate for compact industrial sensor nodes that must acquire analog measurements, apply filtering, evaluate thresholds, and report results. Its integrated A/D converter reduces the number of external components, while 512 KB of flash supports calibration tables, device configuration, logging logic, and protocol handlers. The -40 C to +85 C operating range covers industrial-temperature environments, and the 66 uA/MHz CPU current is favorable for installations with limited thermal budgets. A design should still budget separately for sensor excitation, interface circuits, and the power consumed during active radio or communications periods.
Disebarkan
Battery-Powered Instrument
For a battery-powered measurement instrument, the R5F100MLDFB#30 provides a useful balance of processing capability and low standby demand. The CPU can operate at 32 MHz when calculating sensor data or executing user commands, then the controller can enter STOP mode at 230 nA during idle intervals. The 512 KB flash capacity allows firmware, calibration coefficients, and instrument settings to be consolidated. Power-budget calculations should include sensor current, display demand, regulator efficiency, and wake-up intervals because the MCU figures alone do not describe complete battery life.
Disebarkan
Temperature and Environmental Monitor
The R5F100MLDFB#30 can serve as the central controller in a temperature or environmental monitoring product. Its on-chip 10-bit-class peripheral family is centered on an A/D converter, enabling analog sensor signals to be sampled without a separate converter, while the 32 MHz core supports filtering, threshold decisions, alarm logic, and local display updates. Low-power operation is especially valuable in remote monitors because the device can remain in STOP mode between samples. The exact A/D resolution, conversion time, input range, and sampling configuration must be confirmed in the RL78/G13 Data Sheet before setting sensor accuracy expectations.
Disebarkan
Compact Motor and Relay Control
The R5F100MLDFB#30 is appropriate for compact motor-control, relay-control, and actuator-management modules where deterministic sequencing is required alongside low idle consumption. Its 16-bit architecture executes at 32 MHz with 43.2 DMIPS, enabling control loops, position or timing logic, and protective routines to coexist. The 512 KB flash supports larger state machines and diagnostic algorithms. Designers should use the pin table to confirm timer, PWM, capture, and I/O availability and should account for inductive transients, driver current, and isolation requirements that are handled outside the MCU.
Disebarkan
General-Purpose Embedded Control Module
The R5F100MLDFB#30 is a strong candidate for general-purpose embedded modules that combine firmware-defined logic, serial communication, analog acquisition, and discrete I/O. Its 512 KB program memory and 32 MHz clock provide more headroom than a minimal 8-bit controller, while the on-chip oscillator and data flash simplify board construction and parameter retention. The 80-LFQFP footprint offers a substantial pin count for external sensors and communications. Firmware planning should account for the RL78/G13 peripheral resources, bootloader requirements, and development-tool support before the MCU is frozen for a new platform.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk R5F100MLDFB#30 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | R5F100MLDFB#V0 | R5F100MLDFB#X0 | R5F100MLDFB#50 |
|---|---|---|---|---|
| Package | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) | 80-LFQFP (12 x 12 mm) |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/G13 | RL78/G13 | RL78/G13 | RL78/G13 |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum CPU Clock | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Core Performance | 43.2 DMIPS at 32 MHz | 43.2 DMIPS at 32 MHz | 43.2 DMIPS at 32 MHz | 43.2 DMIPS at 32 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB |
| CPU Operating Current | 66 uA/MHz | 66 uA/MHz | 66 uA/MHz | 66 uA/MHz |
| STOP Mode Standby Current | 230 nA | 230 nA | 230 nA | 230 nA |
Penyeberangsung Jelas
- Latest documented ordering for the RL78/G13 predecessor (vsR5F100MLDFB#V0)
- High processing performance within a low-power MCU (vsR5F100MLDFB#X0)
- On-chip analog and nonvolatile support reduces external circuitry (vsR5F100MLDFB#50)
Catatan Desain
Reserve the 80-LFQFP 12 x 12 mm land pattern and verify all pin assignments against the RL78/G13 package drawing before routing. Keep the MCU's power and ground connections close to their associated pins, maintain the specified decoupling arrangement, and reserve programming or debug access even if the final product does not expose the pins on a connector. The large lead count also makes careful fan-out and via placement important for assembly reliability.
Build the energy budget from the 66 uA/MHz CPU current and 230 nA STOP current, then add peripheral, sensor, communications, and regulator losses. Disable unused peripherals and confirm which clock, peripheral, and I/O states permit the lowest safe standby state. Wake-up latency, sensor-settling time, and regulator quiescent current can dominate a system designed around short measurement intervals.
Do not substitute the 32 MHz headline clock as proof that every operating mode is available under the same voltage or temperature conditions. Review the RL78/G13 Data Sheet electrical-characteristics tables for voltage-dependent frequency limits, startup behavior, I/O limits, and ADC operating conditions. Also confirm the exact package marking and ordering suffix before releasing production artwork or firmware.
Place the on-chip-oscillator-supporting circuitry, A/D converter inputs, and sensitive analog traces away from fast-switching nodes and noisy power-converter areas. Follow the datasheet grounding guidance, provide clean reference paths for analog measurements, and evaluate input filtering according to the required sampling rate. Although the MCU is digital, analog accuracy can be limited by PCB leakage, shared return paths, and inadequate acquisition time.
Maklumat Kesediaan
Renesas mentions support for household-appliance safety standards, but no specific compliance certification for this ordering is stated in the available product information. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer before procurement.