R5F109LDJFB#V0 - 16-Bit 48KB RL78/F12 MCU | Renesas
MPN: R5F109LDJFB#V0 ✓ AktifR5F109LDJFB#V0 Ringkasan
An RL78 microcontroller is a compact reduced-instruction-set processor within Renesas' 8-bit MCU family architecture. Its combination of flash memory, low-power operating modes, mixed-signal peripherals, and functional-safety hardware makes it suitable for battery-powered equipment, automotive electronics, industrial controls, and compact consumer devices. The RL78/F12 family is specifically positioned for designs requiring low consumption current, LIN connectivity, and safety-oriented peripheral functions.
The R5F109LDJFB#V0 provides 48 KB of flash memory for firmware and 1.8 V to 5.5 V electrical operation. Its LIN module supports communication with automotive and industrial LIN nodes. Integrated protection features include flash-memory CRC calculation, illegal-memory-access detection, RAM guard, A/D-converter testing, and special-function-register protection. These functions help detect memory and peripheral faults while retaining the simplicity of an 8-bit-class microcontroller architecture.
The device uses a 64-pin LQFP package and belongs to an RL78/F12 lineup offered in configurations ranging from 20 to 64 pins and 8 KB to 64 KB of flash memory. This range allows designers to select a smaller pin count or greater memory capacity when system complexity increases. Before finalizing a PCB, review the exact R5F109LDJFB#V0 pin configuration, peripheral availability, and multiplexing requirements in the manufacturer datasheet.
Typical uses include LIN-connected automotive control modules, sensor interfaces, compact industrial controllers, low-power condition-monitoring equipment, and battery-operated consumer products. The LIN interface is especially useful where a distributed network must combine low-cost wiring with deterministic communication. The 1.8 V minimum operating voltage also supports systems using energy-efficient low-voltage rails.
Design the decoupling network with short return paths and place bulk and high-frequency capacitors close to the appropriate supply pins. Confirm unused-pin handling, programming connections, oscillator configuration, and reset requirements against the exact package drawing. Validate firmware behavior under low-voltage, brownout, and EMC conditions before production release.
This page consolidates the manufacturer product information, sourcing details, package characteristics, related RL78/F12 variants, and practical design guidance. It supports faster MCU selection while preserving the need to verify exact ordering-code, footprint, and application details in the Renesas documentation.
Pilihan pengganti yang segera untuk R5F109LDJFB#V0 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
R5F109LDJFB#H0
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F109LDJFB#H0G
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F109LDCJFB#50
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F109LDJFB#V0 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit microcontroller unit (MCU) |
| Product Family | RL78/F12 |
| Flash Memory | 48 KB |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Architecture | RL78 reduced-instruction-set architecture |
| Antaramuka | LIN module |
| Kemasan | 64-pin LQFP |
| Jenis Pemasangan | Surface mount |
| Family Flash-Memory Range | 8 KB to 64 KB |
| Family Pin-Count Range | 20 pins to 64 pins |
| Power Consumption | Low-consumption current design |
| Flash CRC Calculation | Integrated |
| Illegal Memory Access Detection | Integrated |
| RAM Guard | Integrated |
| A/D Converter Testing | Integrated test function |
| SFR Protection | Integrated functional-safety feature |
Panduan Konfigurasi Pin R5F109LDJFB#V0 64-pin lqfp
Konfigurasi pin untuk R5F109LDJFB#V0 (64-pin lqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk R5F109LDJFB#V0.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
R5F109LDJFB#V0 patut untuk 6 aplikasis: Automotive LIN Control Modules, Industrial Sensor Nodes, Battery-Operated Instruments, Condition-Monitoring Equipment, Low-Power Consumer Controls, Small Motor and Relay Controllers.
Automotive LIN Control Modules
The R5F109LDJFB#V0 fits compact LIN-connected automotive control modules because the RL78/F12 family includes a dedicated LIN interface for distributed vehicle networks. Its 16-bit core and 48 KB of flash provide room for protocol handling, diagnostics, and application logic, while operation from 1.8 V to 5.5 V supports low-voltage power architectures. Integrated flash CRC calculation, illegal-memory-access detection, RAM guard, and A/D converter testing add diagnostic capability near sensors and actuators.
Disebarkan
Industrial Sensor Nodes
The R5F109LDJFB#V0 is appropriate for distributed industrial sensor nodes that require local processing and low standby consumption. Its 48 KB flash supports acquisition routines, filtering, calibration logic, and communication firmware, while the 1.8 V minimum supply voltage accommodates compact power rails. The integrated A/D converter test function and RAM guard improve fault coverage in equipment where measurement integrity and diagnostic behavior are important.
Disebarkan
Battery-Operated Instruments
The R5F109LDJFB#V0 can serve as the control core in battery-operated instruments where low power and compact integration are priorities. The RL78/F12 family's low-consumption design supports reduced-duty-cycle operation, and the 1.8 V to 5.5 V range enables operation from low-voltage cells or regulated boost rails. The 48 KB flash provides sufficient space for measurement control, local data handling, user-interface logic, and diagnostic routines without requiring a higher-performance processor.
Disebarkan
Condition-Monitoring Equipment
The R5F109LDJFB#V0 is well suited to condition-monitoring equipment that samples sensors and communicates status over a low-speed network. Its 16-bit architecture and 48 KB flash can support signal conditioning, threshold evaluation, event logging, and LIN-based communication. The integrated illegal-memory-access detection, flash CRC calculation, RAM guard, and SFR protection strengthen runtime checks, while low-consumption operation is valuable in remote or battery-backed monitoring installations.
Disebarkan
Low-Power Consumer Controls
The R5F109LDJFB#V0 can implement compact consumer controls that combine several inputs, local logic, and a LIN or similar low-speed communication link. Its 48 KB flash accommodates user-interface state machines, product configuration, diagnostics, and communication stacks, and the 1.8 V to 5.5 V range supports compact power designs. The microcontroller's low-consumption focus is advantageous in appliances, portable accessories, and equipment designed for long standby periods.
Disebarkan
Small Motor and Relay Controllers
The R5F109LDJFB#V0 can serve as the supervisory controller in compact motor or relay-control products where local sequencing, status monitoring, and fault reporting are required. Its 16-bit core handles control logic efficiently, while 48 KB of flash provides room for timing, protection, and communication routines. The 64-pin LQFP package offers more external connections than smaller RL78/F12 packages, and integrated memory and peripheral diagnostics support dependable behavior in safety-relevant control paths.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk R5F109LDJFB#V0 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | R5F109LDJFB#H0 | R5F109LDJFB#H0G | R5F109LDCJFB#50 |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 64-pin LQFP | 64-pin LQFP | 64-pin LQFP | 64-QFP |
| Product Family | RL78/F12 | RL78/F12 | RL78/F12 | RL78/F12 |
| Flash Memory | 48 KB | 48 KB | 48 KB | 48 KB |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| Ordering Configuration | R5F109LDJFB#V0 | R5F109LDJFB#H0 | R5F109LDJFB#H0G | R5F109LDCJFB#50 |
Penyeberangsung Jelas
- Uses the controlled R5F109LDJFB ordering configuration (vsR5F109LDCJFB#50)
- Maintains a 64-pin package in the same RL78/F12 family (vsR5F109LDJFB#H0)
- Combines 48 KB flash with low-voltage operation (vsR5F109LDJFB#H0G)
Catatan Desain
Assign the 64-pin LQFP footprint only after checking the mechanical drawing for the exact R5F109LDJFB package dimensions, pad width, pad length, and exposed-pad treatment. Place the MCU close to its decoupling capacitors and maintain short, symmetric supply connections. Keep programming, reset, and oscillator routing away from sensitive analog inputs, and test the assembled layout for crosstalk between communication and measurement circuits.
Design the power tree for operation across 1.8 V to 5.5 V, including startup, brownout, and load-transient conditions. Use short ground returns and provide local bulk capacitance for supply steps while allowing high-frequency ceramic capacitors to handle fast transients. Verify that the selected regulator can meet the MCU's current requirements without entering a state that affects communication timing or diagnostic behavior.
Do not substitute a related RL78/F12 ordering code solely because its memory size and package count match. Review suffix-defined temperature, qualification, packing, and device configuration, then confirm the exact pin table and peripheral multiplexing. Also verify programming requirements and any device-identification checks in production firmware. A footprint match alone does not establish complete hardware or software equivalence.
Route the LIN communication path as a controlled network interface and follow the transceiver requirements for termination, common-mode handling, and protection. Keep the MCU pins and supporting components away from sources of large switching currents. When the MCU also performs analog measurement, isolate sensitive inputs from power-stage routing and validate sampling behavior under the final regulator layout and operating temperature.
Maklumat Kesediaan
No exact-ordering-code compliance declarations were identified. Confirm RoHS, REACH, halogen, conflict-minerals, and automotive qualification status with Renesas before release.