R5F10A6ELSP#U5 - 32MHz 64KB Flash 20-LSSOP MCU | Renesas
MPN: R5F10A6ELSP#U5 ✓ AktifR5F10A6ELSP#U5 Ringkasan
An RL78 microcontroller is a low-power embedded-controller platform based on a 16-bit reduced instruction set computer architecture. RL78 devices occupy the microcontroller branch of the semiconductor hierarchy and combine CPU, flash memory, RAM, timers, serial interfaces, analog functions, and GPIO resources in one integrated circuit. The RL78/F13 family extends the Renesas 78K0R and R8C product lines and targets applications requiring low standby current, compact packages, and reliable communications interfaces.
The R5F10A6ELSP#U5 combines a 32 MHz maximum CPU frequency with 64 KB of program flash and 4 KB of RAM. Its operating-voltage range supports 3.3 V and 5 V system rails, while the 20-pin LSSOP package reduces board area compared with larger leaded or fine-pitch packages. The -40°C to +105°C temperature rating makes the device suitable for industrial environments and automotive equipment exposed to elevated ambient temperatures.
RL78/F13 devices integrate CAN and LIN communication hardware, functional-safety features, RAM error-correction functionality, PLL lock monitoring, and port-output-state monitoring. These functions support robust control and diagnostic designs, particularly where communications reliability and fault detection are important. The 16-bit architecture also provides an efficient balance between processing capability, code density, and energy consumption for embedded control tasks.
Typical uses include automotive body-control modules, CAN-connected equipment, LIN-based vehicle subsystems, industrial controllers, motor-control systems, sensor-hub designs, and compact consumer appliances. A CAN or LIN network can use the integrated peripheral to reduce external component count, while the 64 KB flash capacity permits a substantial embedded application, bootloader, configuration data, and communication firmware within one device.
PCB planning should preserve the manufacturer-defined pin arrangement and provide adequate clearance around the 20-pin LSSOP footprint. Firmware must validate the PLL lock status, use the RAM ECC capability where required, and implement communications timeout and fault-recovery routines. Because automotive and safety-related designs can depend on detailed peripheral behavior, use the Renesas RL78/F13 hardware manual for register-level implementation guidance.
This page combines manufacturer specifications, practical integration guidance, application fit, and validated same-family alternatives. It also distinguishes documented electrical attributes from parameters that require confirmation before schematic release or production qualification.
Pilihan pengganti yang segera untuk R5F10A6ELSP#U5 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
R5F10A6ELSP#G5
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F10A6ELSP#W5
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
R5F10A6ELSP#U5 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16-bit microcontroller |
| Series | RL78/F13 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| RAM | 4 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Gambaran Suhu Operasi | -40°C to +105°C |
| Kemasan | 20-LSSOP |
| Architecture | 16-bit |
| CAN Interface | Integrated |
| LIN Interface | Integrated |
| RAM ECC | Supported |
| PLL Lock Function | Supported |
| Port Output State Monitoring | Supported |
Panduan Konfigurasi Pin R5F10A6ELSP#U5 20-lssop
Konfigurasi pin untuk R5F10A6ELSP#U5 (20-lssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk R5F10A6ELSP#U5.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
R5F10A6ELSP#U5 patut untuk 6 aplikasis: Automotive Body Control Modules, LIN Subnetwork Control, CAN-Connected Industrial Control, Battery-Powered Sensor Hubs, Motor and Actuator Control, Reliable Automotive Subsystems.
Automotive Body Control Modules
The R5F10A6ELSP#U5 fits compact body-control modules that combine low-power operation with vehicle-network connectivity. Its 16-bit RL78/F13 architecture runs at up to 32 MHz, while 64 KB of flash and 4 KB of RAM support control logic, diagnostics, and communications firmware. The integrated CAN and LIN interfaces can reduce the need for external protocol hardware, and the -40°C to +105°C rating supports elevated-temperature vehicle environments. The 20-LSSOP package also limits PCB area. Confirm exact transceiver requirements, automotive qualification, and transient immunity in the complete system design.
Disebarkan
LIN Subnetwork Control
The R5F10A6ELSP#U5 is suitable for a LIN-connected slave or supervisory controller in distributed automotive and industrial systems. Its integrated LIN interface supports communication without a separate protocol controller, while the 32 MHz RL78/F13 CPU provides ample control headroom for debouncing, diagnostics, and actuator management. The 64 KB flash capacity can hold application firmware, configuration data, and a communication stack. Use the manufacturer timing and peripheral documentation to configure baud rate, wake-up behavior, and fault handling, and validate the external transceiver interface against the target network specification.
Disebarkan
CAN-Connected Industrial Control
The R5F10A6ELSP#U5 can serve as the local controller in a CAN-based industrial subsystem where a compact 20-pin device and low-power architecture are valuable. Its 32 MHz 16-bit processor supports responsive control loops, 64 KB flash accommodates embedded firmware, and 4 KB RAM provides working space for diagnostics and communication tasks. The 2.7 V to 5.5 V supply range simplifies integration with common industrial rails, while the -40°C to +105°C rating supports thermally demanding equipment. Add an appropriate CAN transceiver and validate bus timing, termination, isolation, and EMC requirements at system level.
Disebarkan
Battery-Powered Sensor Hubs
The R5F10A6ELSP#U5 fits battery-powered sensor-hub designs that need more processing capability than a basic 8-bit controller but must retain a compact footprint. The RL78/F13 architecture is positioned for low-consumption operation, and its 20-LSSOP package leaves board area for sensors and radio hardware. The 64 KB flash can store sampling, filtering, calibration, and low-power state-machine firmware, while the integrated CAN or LIN interface supports wired links where required. Determine the actual average current in sleep, run, and communications modes from the manufacturer datasheet and firmware configuration before estimating battery life.
Disebarkan
Motor and Actuator Control
The R5F10A6ELSP#U5 is appropriate for small motor and actuator controllers that combine timing functions with network diagnostics. Its 16-bit CPU operates at up to 32 MHz, supporting responsive PWM and feedback-control routines, while 64 KB flash provides room for control algorithms and parameter storage. The integrated communications interface enables remote commands and fault reporting, and the -40°C to +105°C range suits equipment beyond room temperature. Place external power-stage components according to their ratings, validate timing margins at the highest motor drive frequency, and include hardware shutdown paths for overcurrent or sensor faults.
Disebarkan
Reliable Automotive Subsystems
The R5F10A6ELSP#U5 is suited to safety-conscious automotive subsystems that require fault visibility as well as deterministic embedded control. The RL78/F13 family includes RAM ECC, PLL lock detection, and port-output-state monitoring, helping firmware identify memory, clock, or output anomalies. The 32 MHz CPU and 64 KB flash support diagnostics and supervisory logic, while CAN and LIN support integration with vehicle networks. Use the functional-safety features as part of a documented system strategy: specify diagnostic coverage, reaction times, safe-state behavior, and external hardware protections rather than treating a peripheral feature as complete functional safety by itself.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk R5F10A6ELSP#U5 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | R5F10A6ELSP#G5 | R5F10A6ELSP#W5 |
|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-LSSOP | 20-LSSOP | 20-LSSOP |
| Series | RL78/F13 | RL78/F13 | RL78/F13 |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
Penyeberangsung Jelas
- Combines 32 MHz control performance with integrated vehicle-network interfaces (vsR5F10A6ELSP#G5)
- Maintains the same core architecture, memory class, and package outline (vsR5F10A6ELSP#W5)
- Supports compact automotive-oriented embedded control (vsAT90CAN64-16MUR)
Catatan Desain
Use the exact 20-pin LSSOP land pattern and the manufacturer pin-description table when assigning nets. Keep the decoupling capacitor between the device supply and ground pins as close as practical, with a short and low-inductance ground return. The 2.7 V to 5.5 V operating range does not remove the need to check voltage-dependent frequency limits and external regulator tolerances against the complete operating envelope.
Confirm the maximum operating frequency for the selected supply voltage before configuring the clock tree. If the PLL is enabled, monitor the PLL lock indication and define firmware behavior for lock loss. Estimated power consumption must be calculated from the actual clock, peripheral, sleep mode, and I/O load; nominal CPU frequency alone does not represent the current drawn by the complete embedded system.
Do not assume that an RL78/F13 orderable suffix is interchangeable solely because the CPU speed, flash size, and package match. Compare the exact suffix-specific temperature range, qualification, pin configuration, and delivery format. For CAN or LIN designs, also validate transceiver pin levels, timing, termination, wake-up behavior, and fault recovery rather than relying only on the microcontroller peripheral name.
Reserve the programming and debug connections identified by the manufacturer before placing nearby components. Keep switching-regulator and high-current actuator paths away from sensitive communication and measurement traces. When using CAN or LIN, route the physical network interface according to the transceiver reference layout, provide the specified protection components, and keep the return path continuous to reduce radiated emissions and susceptibility to external noise.
Maklumat Kesediaan
The indexed product information identifies automotive-interface capabilities and an extended temperature range but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for the complete orderable MPN.