STM32F042K6U6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics
MPN: STM32F042K6U6 ✓ AktifSTM32F042K6U6 Ringkasan
A microcontroller is an integrated circuit containing a processor core, memory, and peripherals on one device. The STM32F042K6U6 combines an ARM Cortex-M0 RISC core with embedded Flash and RAM resources, allowing a control system to execute firmware and interface with sensors, communications links, and actuators. In the hierarchy, it is a 32-bit microcontroller, embedded processor, semiconductor, and programmable control component.
Verified features include a maximum 48 MHz operating frequency, 32 KB of Flash memory, USB, CAN, and an ARM Cortex-M0 CPU. The STMicroelectronics product page also describes high-speed embedded memory and the STM32F042x4/x6 device family. These features make the device relevant to USB-enabled human-interface equipment, industrial control nodes, communications modules, and low-cost embedded systems where a small package and integrated connectivity are useful.
The U6 ordering code identifies the 32-pin UFQFPN option, while the exposed-pad package and tray presentation are reflected in the verified distributor data. The package is a surface-mount QFN-family component designed for PCB mounting. The exact RAM size, GPIO count, ADC resolution, supply limits, and pin names are not stated in the supplied verified data and must be confirmed from the manufacturer datasheet before design release.
Typical design decisions include checking the USB clock configuration, CAN transceiver interface, bootloader workflow, and firmware peripheral mapping in the STM32CubeMX or equivalent STM32 toolchain. USB signal routing requires controlled impedance and careful placement of the USB data lines; CAN routing should account for transceiver requirements, termination, and protection. Designers should also confirm the exposed-pad thermal and assembly requirements from the manufacturer documentation.
This product page consolidates the verified manufacturer identity, distributor specifications, package information, and sourcing context into one engineering reference. It does not substitute datasheet values that were not supplied in the verified web data. Confirm the official datasheet, errata, pinout, memory map, and electrical limits before PCB release or production qualification.
Pilihan pengganti yang segera untuk STM32F042K6U6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F042K6U6 (sama faktor bentuk dan kaki) — berbeza dalam Package, Flash Memory, Communication Interfaces, SRAM.
STM32F031K6U6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F042K4U6
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F042C4U6
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F042C4T6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F072C8T6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F042K6U6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Processor Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB |
| Architecture | 32-bit RISC |
| Supply Class | 2.5 V/3.3 V |
| USB Interface | USB |
| CAN Interface | CAN |
| Series | STM32F0 |
| Kemasan | 32-pin UFQFPN (5x5 mm) |
| Jenis Pemasangan | Surface Mount |
Panduan Konfigurasi Pin STM32F042K6U6 32-pin ufqfpn (5x5 mm)
Konfigurasi pin untuk STM32F042K6U6 (32-pin ufqfpn (5x5 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F042K6U6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F042K6U6 patut untuk 6 aplikasis: USB Control Interface, CAN Communications Node, Industrial Sensor Gateway, USB Human Interface Device, Compact Embedded Control Board, USB-CAN Protocol Bridge.
USB Control Interface
STM32F042K6U6 fits a USB-enabled control interface because the verified device description includes USB connectivity and an ARM Cortex-M0 core operating up to 48 MHz. The MCU can manage enumeration, configuration descriptors, control transfers, and application-specific USB tasks while retaining 32 KB of Flash for firmware. In a practical design, route D+ and D- as a controlled-impedance pair, provide the required USB transceiver or device interface, and confirm the exact USB electrical and clock requirements in the STMicroelectronics datasheet. USB shielding, connector protection, ESD design, and firmware update strategy should also be reviewed before production.
Disebarkan
CAN Communications Node
STM32F042K6U6 is a suitable starting device for a compact CAN communications node because the verified Mouser description identifies CAN connectivity and the MCU provides a 48 MHz Cortex-M0 processing core with 32 KB of Flash. Use the MCU with an external CAN transceiver, protection components, and a correctly terminated bus. Firmware should configure the CAN bit timing for the selected network and include fault handling for bus-off and error conditions. The supplied data does not specify CAN version, baud-rate range, transceiver requirements, or electrical limits, so those details must be verified before schematic release.
Disebarkan
Industrial Sensor Gateway
STM32F042K6U6 can support a small industrial sensor gateway when the design needs local control plus USB or CAN communications. The 48 MHz ARM Cortex-M0 core provides timing for sensor acquisition, filtering, and data packaging, while 32 KB of Flash stores application firmware. A gateway implementation may use the MCU to read digital or analog sensors, format data, and forward status through a USB service port or CAN network. Because the verified data does not provide ADC specifications, temperature limits, EMC ratings, or industrial certifications, the exact analog front end and qualification requirements must be selected separately.
Disebarkan
USB Human Interface Device
STM32F042K6U6 is relevant to a USB human-interface device because the verified DigiKey listing places the part in the USB MCU category and the listed MCU has 32 KB of Flash and a 48 MHz Cortex-M0 core. It can execute device firmware for keyboards, control panels, configuration tools, or other low-bandwidth peripherals. The design should define USB power sourcing, enumeration behavior, descriptor compatibility, endpoint layout, and suspend or wake behavior early. Use the current STMicroelectronics USB documentation and validate the complete device against operating-system compatibility requirements rather than relying only on the distributor category label.
Disebarkan
Compact Embedded Control Board
STM32F042K6U6 suits compact embedded control boards where a small surface-mount package, 48 MHz processing capability, and integrated USB or CAN connectivity are valuable. The MCU can supervise relays, indicators, sensors, and local user inputs while retaining a small PCB area. Layout should reserve clear access to the exposed pad, maintain short power and ground paths, and separate communications routing from sensitive analog sections. The supplied data confirms a 32-pin UFQFPN package but does not state GPIO mapping, RAM, pin-level limits, or recommended decoupling, so those details must be taken directly from the official datasheet.
Disebarkan
USB-CAN Protocol Bridge
STM32F042K6U6 is a logical starting point for a USB-to-CAN protocol bridge because the verified product descriptions identify both USB and CAN in one MCU family position. The device can receive commands over USB, validate frames, and forward data to a CAN transceiver and bus. Firmware architecture should separate transport parsing, CAN framing, timeout handling, diagnostics, and firmware update so that a bus fault cannot lock up the USB service interface. Keep USB and CAN routing separated, provide ESD and surge protection, and verify transceiver logic levels, termination, isolation, and timing from the selected companion components before PCB release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F042K6U6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F031K6U6 | STM32F042K4U6 | STM32F042C4U6 | STM32F042C4T6 | STM32F072C8T6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) |
Penyeberangsung Jelas
- Verified connectivity combination (vsSTM32F031K6U6)
- Higher-frequency processing class (vsSTM32F042K4U6)
- Compact package integration (vsSTM32F042C4U6)
- Target-specific source traceability (vsSTM32F072C8T6)
Catatan Desain
Place the STM32F042K6U6 power and decoupling connections directly at the relevant package pins, and preserve a continuous ground reference beneath and around the device. The verified data confirms a 32-pin UFQFPN package, but does not provide the official pin map or exposed-pad connection; obtain the current STMicroelectronics package drawing and follow its land-pattern and thermal-pad guidance before release.
Route USB D+ and D- as a short, matched, continuously referenced pair and keep the route away from switching nodes, high-current returns, and unprotected connector pins. The verified product listings confirm USB capability, but they do not specify the USB PHY implementation, impedance target, or clock topology. Confirm those requirements in the manufacturer datasheet and validate the completed layout with the intended USB host or cable assembly.
Do not select a related STM32F0 MPN solely because its frequency and family name appear similar. USB, CAN, Flash, RAM, GPIO, alternate functions, package drawings, and electrical limits can differ even across related order codes. Because the supplied cross-reference results do not establish complete equivalence, compare every candidate against the official STM32F042K6U6 datasheet, errata, pinout, and application requirements before changing the BOM.
For a CAN implementation, separate the MCU and digital switching paths from the external transceiver and protected cable interface. Use the selected transceiver's recommended termination and protection arrangement, and keep the CAN loop as compact as practical. For USB, provide connector-side ESD protection and controlled return-current continuity. Exact protection devices and layout values are not supplied in the verified data and must be selected from the application requirements.
Maklumat Kesediaan
The supplied verified product and distributor snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these claims from the current manufacturer product documentation and applicable supplier certificates.
