STM32F723IET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
MPN: STM32F723IET6 ✓ AktifSTM32F723IET6 Ringkasan
A microcontroller is an integrated semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one device. The STM32F723 belongs to the STM32F7 family of 32-bit embedded microcontrollers and sits above general-purpose STM32F0 devices in processing capability. Its Arm Cortex-M7 core provides deterministic real-time execution for industrial control, motor control, metering, automation, and IoT equipment, while the large pin count supports numerous external interfaces and mixed-signal connections.
The principal features include a 216 MHz operating frequency, 512 KB of Flash, 256 KB of SRAM, 138 I/O pins, and an integrated 12-bit ADC identified in the verified product data. The device also supports SDRAM operation, DSP-oriented processing, and an Art Accelerator for graphics acceleration. Its 1.7 V to 3.6 V operating range makes it suitable for conventional embedded supply rails, while its -40 °C to +85 °C temperature range supports industrial equipment.
Technically, the Cortex-M7 architecture provides the processing headroom needed for complex control algorithms, protocol stacks, and signal processing. The L1 cache can improve execution efficiency in code-intensive workloads, while SDRAM support allows applications to use external memory when internal SRAM is insufficient. The 176-pin LQFP-176 package also exposes a broad peripheral complement compared with smaller 32-, 64-, or 100-pin MCU packages.
Typical uses include industrial automation controllers, motor-control systems, connected IoT gateways, data-acquisition equipment, and metering products. Its 138 I/O pins are especially useful when a design must connect multiple sensors, communication transceivers, human-interface interfaces, and power-management components without relying on external I/O expanders.
The primary design consideration is PCB density. A 24 mm by 24 mm LQFP-176 footprint requires careful escape routing, adequate ground-plane continuity, and decoupling close to the supply pins. Because this MCU combines 216 MHz processing with 138 I/O, signal-integrity and power-integrity planning are essential in designs using long traces, high-speed interfaces, or external SDRAM.
This page consolidates the verified manufacturer and distributor information for STM32F723IET6 and adds application-oriented design guidance, package-aware alternatives, procurement context, and an explicit comparison framework that is not presented as a substitute for the complete manufacturer datasheet.
Pilihan pengganti yang segera untuk STM32F723IET6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F723IET6 (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Flash Organization, Floating-Point Unit, Package, Product Type.
STM32F723IEK6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM32F723ICT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F723IED6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F723IEC6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F722IET6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F723IET6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit embedded microcontroller |
| Processor Core | Arm Cortex-M7 |
| CPU Frequency | 216 MHz |
| Architecture | 32-bit |
| Embedded Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| RAM Memory | 256 KB |
| Number of I/O Pins | 138 pins |
| Kemasan | LQFP-176, 24 mm x 24 mm |
| Operating Voltage Range | 1.7 V to 3.6 V |
| Gambaran Suhu Operasi | -40 °C to +85 °C |
| ADC Resolution | 12-bit |
| DSP Support | Yes |
| Floating-Point Unit | Yes |
| Cache | L1 cache |
| Graphics Accelerator | Art Accelerator |
| External Memory Support | SDRAM |
| Packaging | Tray |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin STM32F723IET6 lqfp-176, 24 mm x 24 mm
Konfigurasi pin untuk STM32F723IET6 (lqfp-176, 24 mm x 24 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F723IET6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F723IET6 patut untuk 6 aplikasis: Industrial Automation Controller, Motor Control System, Industrial IoT Gateway, Data Acquisition and Metering, Connected Embedded Equipment, Human-Machine Interface Controller.
Industrial Automation Controller
The STM32F723IET6 fits industrial automation controllers that combine deterministic control with numerous field connections. Its 216 MHz Cortex-M7 core and DSP and floating-point support provide processing capacity for control loops, communications, and data transformation, while 138 I/O pins reduce the need for I/O expanders. The 176-pin LQFP-176 package provides extensive connectivity but requires careful PCB planning. Designers should place supply-decoupling capacitors close to the device, preserve ground-plane continuity, and validate every high-speed route for signal integrity before industrial control-loop deployment.
Disebarkan
Motor Control System
The STM32F723IET6 is appropriate for sophisticated motor-control systems requiring both computation and a broad peripheral connection set. The 216 MHz Arm Cortex-M7 core, DSP capability, and floating-point unit support sampled current and position-control algorithms, while the 12-bit ADC provides an acquisition path for analog feedback. Its 1.7 V to 3.6 V operating range supports embedded 3.3 V system designs. The principal trade-off is routing complexity: 138 I/O and a 24 mm by 24 mm LQFP footprint require deliberate partitioning of power, motor-drive, and feedback signals.
Disebarkan
Industrial IoT Gateway
The STM32F723IET6 supports industrial IoT gateways that must combine protocol processing, local control, and multiple wired interfaces. Its 216 MHz Cortex-M7 core and 256 KB of RAM are suitable for network stacks and application tasks, while SDRAM support allows larger data buffers when internal memory is insufficient. The 138 I/O pins provide practical connectivity for Ethernet, serial links, status indicators, and sensors. Designers should isolate high-speed communication routes from switching and power-conversion circuitry and verify timing, termination, and power sequencing for every external interface.
Disebarkan
Data Acquisition and Metering
The STM32F723IET6 is well suited to metering and data-acquisition equipment requiring a 12-bit ADC, real-time processing, and extensive board connectivity. The Cortex-M7 core can process acquired samples while DSP and floating-point features support filtering and calculations, and the 216 MHz clock rate leaves headroom for communications and user-interface tasks. The 138 I/O pins can connect analog front ends, memory, displays, and communications transceivers. Engineers should plan analog and digital return paths carefully and maintain short, quiet connections around the ADC input network.
Disebarkan
Connected Embedded Equipment
The STM32F723IET6 can serve as the control processor in connected embedded equipment where high processing performance and extensive I/O are needed together. Its 216 MHz Cortex-M7 core supports protocol handling and application logic, while L1 cache, SDRAM support, and 512 KB of Flash help accommodate more demanding firmware. The LQFP-176 package offers enough pins for multiple communication and control functions, but its 24 mm by 24 mm footprint is larger than common compact MCU packages. Layout should emphasize controlled impedance, solid reference planes, and isolated return paths for communications interfaces.
Disebarkan
Human-Machine Interface Controller
The STM32F723IET6 can manage human-machine interface equipment that includes displays, input controls, communications, and embedded processing. Its 216 MHz core provides headroom for graphics-oriented control, while the Art Accelerator, L1 cache, and SDRAM support improve suitability for richer display workloads. The 138 I/O pins permit direct connection of display interfaces, buttons, indicators, and external memories. Because the LQFP-176 package exposes many high-speed signals, designers should use short display routes, continuous ground planes, and verified power sequencing to prevent logic errors during startup.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F723IET6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F723IEK6 | STM32F723ICT6 | STM32F723IED6 | STM32F723IEC6 | STM32F722IET6 |
|---|---|---|---|---|---|---|
| Package | LQFP-176 (24x24 mm) | LQFP-176 (24x24 mm) | LQFP-176 (24x24 mm) | LQFP-176 (24x24 mm) | LQFP-176 (24x24 mm) | LQFP-176 (24x24 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
Penyeberangsung Jelas
- Higher embedded Flash capacity in the STM32F72xxx comparison (vsSTM32F722IET6)
- High-frequency Cortex-M7 processing (vsSTM32F723ICT6)
- Extensive package connectivity (vsSTM32F723IEC6)
- Broad memory expansion capability (vsSTM32F722IET6)
Catatan Desain
Use the STMicroelectronics STM32F722xx and STM32F723xx datasheet as the authority for supply-pin identification, capacitor values, and startup sequencing. Place the required bypass capacitors as close as practical to their associated VDD and VSS pins, while keeping switching-regulator and digital return currents out of the MCU's local ground path. The verified operating range is 1.7 V to 3.6 V, but range compliance alone does not guarantee stable operation; rail tolerances, transient response, and simultaneous 216 MHz activity must also be validated.
Design the PCB around the 176-pin LQFP footprint on a 24 mm by 24 mm body rather than treating it as a small leaded MCU. Maintain a continuous ground plane beneath and around the device, minimize vias beneath fine-pitch leads, and provide unobstructed access for inspection and rework. Fanout escape traces must account for all 138 I/O assignments and the high switching activity of the 216 MHz core. Before layout release, compare every selected alternative against the official pin table because footprint similarity does not by itself guarantee peripheral or pin-function compatibility.
Treat external SDRAM and other high-speed interfaces as constrained routing problems. Keep traces short, provide continuous reference planes, avoid split-plane crossings, and match length where the memory interface requires it. The STM32F723IET6 supports SDRAM and operates up to 216 MHz, so signal-integrity simulation and measurement may be necessary in a complex board. Do not infer SDRAM timing or pin multiplexing from the distributor summaries; use the manufacturer pin table, electrical characteristics, and reference documentation for the final design.
A common mistake is treating every similarly packaged STM32 as a software-identical substitute. The STM32F722IET6 candidate, for example, is listed as having 256 KB of Flash versus 512 KB for STM32F723IET6, a 50% reduction. Confirm flash partitioning, peripheral availability, clock configuration, pin multiplexing, startup behavior, and qualification before replacing a design. After any substitution, rebuild the firmware and test every board-level interface; package compatibility alone does not establish functional equivalence.
Maklumat Kesediaan
RoHS compliance is supported by the verified JLCPCB component listing. The supplied sources do not state REACH, AEC-Q100 qualification, lead-free, halogen-free, or conflict-minerals status, so those fields remain unknown or not applicable without additional manufacturer declarations.
