STM32F746VGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | ST
MPN: STM32F746VGT6 ✓ AktifSTM32F746VGT6 Ringkasan
A microcontroller is an embedded-computing semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communication controllers, timers, and analog interfaces. The STM32F7 series belongs to the high-performance Arm Cortex-M microcontroller hierarchy. It combines real-time control capabilities with digital signal-processing-oriented resources, making it relevant to industrial controllers, communications equipment, and data-acquisition systems.
The verified listing highlights a 32-bit Arm Cortex-M7 core, 216 MHz maximum clock, 1 MB flash, CAN connectivity, and a 100-LQFP 14 x 14 mm package. Search results also describe a 3.3 V part. These features distinguish it from lower-pin-count microcontrollers and provide 100 external connections in a surface-mount design. Because the supplied snippets do not expose complete peripheral inventories, detailed RAM, voltage-range, and pin-function claims remain marked as data needed rather than inferred.
The Cortex-M7 architecture supports real-time workloads while the 1 MB program-memory configuration offers room for larger embedded applications. CAN connectivity is relevant to industrial and vehicle-adjacent networking, although network transceiver selection and termination remain board-level requirements. A 100-pin LQFP also provides more I/O than smaller 48-pin or 64-pin packages, allowing designers to connect displays, sensors, communications transceivers, and control outputs without an extremely fine-pitch BGA layout.
Typical design uses include industrial automation, CAN-connected control panels, instrumentation, communications equipment, audio and DSP-oriented control, and high-performance sensor hubs. Firmware migration still requires matching clock trees, peripheral instances, pin assignments, memory maps, and development-tool support; a similar specification alone does not guarantee software compatibility.
Place all decoupling capacitors and low-speed support circuitry according to the official device documentation, and validate every power domain and signal standard before PCB release. Because the complete pinout and electrical limits were not included in the verified snippets, consult the manufacturer datasheet and reference manual before routing or assembly.
This page consolidates verified distributor specifications, a genuine distributor price reference, honest sourcing limits, and practical selection guidance. It distinguishes confirmed STM32F746VGT6 facts from unverified details rather than filling gaps with assumed pin, memory, or compliance data.
Pilihan pengganti yang segera untuk STM32F746VGT6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F746VGT6 (sama faktor bentuk dan kaki) — berbeza dalam Package, Core, Flash Memory, Product Type, Operating Temperature.
STM32F7767VGT6
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F765VIT6
✅ Masuk Drop-In✗ Stok Habis
$10.37 / Unit
Lihat Datasheet →STM32F429VGT6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F407VGT6TR
✅ Masuk Drop-In✗ Stok Habis
$7.55 / Unit
Lihat Datasheet →STM32F405VGT6TR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F746VGT6 Penilaian maksimum & Ciri-ciri Elektrik
| Core Processor | Arm Cortex-M7 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Series | STM32F7 |
| Product Family | STM32F746 |
| Connectivity | CAN |
| Device Category | ARM Microcontrollers - MCU |
| Nominal Device Voltage | 3.3 V |
| Kemasan | 100-pin LQFP |
| Package Dimensions | 14 x 14 mm |
| Jenis Pemasangan | Surface Mount |
| Packaging Form | Tray |
Panduan Konfigurasi Pin STM32F746VGT6 14 x 14 mm
Konfigurasi pin untuk STM32F746VGT6 (14 x 14 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F746VGT6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F746VGT6 patut untuk 6 aplikasis: Industrial CAN Control, High-Speed Data Acquisition, Communications Gateway, Audio and DSP Control, Test and Measurement Instrument, Embedded Sensor Hub.
Industrial CAN Control
The STM32F746VGT6 fits an industrial CAN controller because the verified listing confirms CAN connectivity and a 216 MHz Arm Cortex-M7 core. Its 100-pin LQFP package also exposes a larger connection set than many compact MCUs, allowing control outputs, status inputs, and communications signals to share one board. Place the MCU beside a suitable CAN transceiver rather than connecting the network directly to the device. Validate transceiver logic levels, bus termination, protection devices, isolation requirements, oscillator accuracy, and timing before release. The verified 1 MB flash provides substantial firmware storage, although the supplied data does not confirm RAM size or the complete set of timers and analog peripherals.
Disebarkan
High-Speed Data Acquisition
The STM32F746VGT6 is a plausible real-time acquisition controller because it combines a 216 MHz Cortex-M7 core with 1 MB flash in a 100-pin LQFP. Those verified resources support firmware that coordinates sensors, timing, and data movement, but analog signal quality cannot be inferred from the snippets. External ADC selection and front-end design will determine resolution, bandwidth, and noise performance. Match ADC timing, reference voltage, input range, and digital interfaces to verified MCU capabilities before schematic capture. The package's 100 pins may reduce multiplexing pressure, while the MCU's verified operating ceiling must remain compatible with all selected clock and power conditions.
Disebarkan
Communications Gateway
The STM32F746VGT6 suits a communications gateway prototype when 216 MHz processing, 1 MB flash, CAN connectivity, and a 100-pin package align with the design. The microcontroller can coordinate protocol conversion and local buffering, but network interfaces require external PHY or transceiver hardware. Separate analog, digital, clock, and Ethernet/CAN return paths to reduce coupling, especially when several communication domains converge. Confirm actual peripheral instances, alternate-function mappings, DMA channels, and package pins in the official documentation; those details are not exposed by the verified search snippets. Firmware portability from another STM32F7 device also requires review of startup code, pin assignments, and peripheral differences.
Disebarkan
Audio and DSP Control
The STM32F746VGT6 is relevant to audio and DSP-oriented control because Mouser classifies it as a high-performance Cortex-M7 MCU with DSP-FPU capability, while verified timing reaches 216 MHz. It can supervise signal processing, interface codecs, and control protocols when the required peripherals and memory are confirmed. The 1 MB flash accommodates firmware, but the available snippets do not verify RAM capacity, audio interfaces, or DMA capabilities. Treat 3.3 V as a nominal device description, not a complete operating-range specification. Use short, referenced clock and data paths, and validate codec clock ratios, grounding, and digital-to-analog domain separation before layout approval.
Disebarkan
Test and Measurement Instrument
The STM32F746VGT6 can serve as the supervisory controller in a test-and-measurement instrument because its verified 216 MHz core and 1 MB flash support substantial real-time firmware. The 100-pin package offers room for control interfaces, displays, status signals, and data-acquisition links. However, measurement accuracy comes from the selected converters, references, analog frontend, and layout rather than the MCU clock alone. Isolate analog and digital return currents, use a clean reference strategy, and verify the MCU's supported ADC or external-converter interface before selecting it. Complete memory, GPIO, timer, and operating-temperature information must come from the manufacturer documentation before production qualification.
Disebarkan
Embedded Sensor Hub
The STM32F746VGT6 is applicable to an embedded sensor hub when the system needs more processing capacity or package connections than a smaller microcontroller provides. Verified features include a 32-bit Cortex-M7 core, 216 MHz operation, 1 MB flash, and a 100-pin LQFP. Use those resources to coordinate sensor acquisition, local filtering, and event handling, but verify RAM, peripheral multiplexing, and analog inputs first. Powered sensors and communication transceivers can introduce ground and supply noise, so partition high-current return paths and keep sensitive nodes away from switching nodes. Firmware should include calibration, sensor diagnostics, and safe defaults for unused pins after their exact assignments are confirmed.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F746VGT6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F7767VGT6 | STM32F765VIT6 | STM32F429VGT6 | STM32F407VGT6TR | STM32F405VGT6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP |
Penyeberangsung Jelas
- Verified high-frequency Cortex-M7 configuration (vsSTM32F765VIT6)
- Large 100-pin LQFP interface capacity (vsSTM32F429VGT6)
- Substantial verified program-memory organization (vsSTM32F407VGT6TR)
Catatan Desain
Do not treat a matching 100-LQFP outline as proof of drop-in equivalence. The verified discussion for STM32F746VGT6 and STM32F7767VGT6 specifically mentions architecture similarity plus flash and RAM differences. Before replacing an installed design, compare every power pin, alternate-function pin, boot configuration, exposed function, clock source, peripheral mapping, and software driver assumption against current manufacturer documentation. This is a migration-review requirement, not a claim that undocumented behavior is identical.
Route the MCU supply network as a compact, low-impedance distribution structure and place local decoupling at the associated pins according to the official layout guidance. Separate noisy communications and switching loads from sensitive analog returns, especially on boards combining CAN, high-speed digital interfaces, and acquisition circuitry. Keep clocks short and referenced to a controlled ground return. Exact capacitor values and current limits require the manufacturer datasheet because those details were not present in the verified snippets.
Treat 216 MHz as a core-frequency specification, not permission to route every signal at that rate without qualification. Identify each high-speed interface's actual edge rate, impedance, topology, and return path, then apply the corresponding STM32 electrical and layout guidance. For communications designs, isolate transceiver return currents and power domains to prevent controller pin stress. Validate oscilloscope margins and protocol eye diagrams on final hardware rather than inferring performance from the MCU clock rate.
Maklumat Kesediaan
The supplied search snippets do not provide explicit compliance statements for STM32F746VGT6. No compliance status was inferred.
