STM32H723VGH6 - 550MHz Cortex-M7 1MB Flash MCU | ST
MPN: STM32H723VGH6 ✓ AktifSTM32H723VGH6 Ringkasan
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose input/output. Within the embedded-computing hierarchy, this device belongs to the Arm Cortex-M class, combines high-performance digital control with DSP-oriented processing, and serves as the central controller in industrial, networking, motor-control, and connected embedded products.
The headline capabilities include a 550 MHz Cortex-M7 core, 1 MB of flash, 564 KB of RAM, an L1 cache, and an external memory interface. The manufacturer datasheet result also identifies Ethernet, USB, three FDCAN peripherals, graphics, and two 16-bit ADCs. These interfaces support high-bandwidth communications, motor and automation systems, graph-based user interfaces, and precision analog acquisition while preserving deterministic embedded-control capability.
The MCU is designed for demanding applications where processing throughput, memory capacity, and peripheral integration matter more than minimum cost or smallest package size. Its 100-TFBGA package provides 100 external connection points, enabling access to the documented GPIO, communication, analog, timer, power, debug, and memory resources. Package layout, voltage domains, peripheral availability, and pin multiplexing must be checked against the manufacturer datasheet before schematic or PCB release.
Typical uses include industrial motor controllers, networked industrial equipment, Ethernet-connected machines, USB-enabled embedded systems, FDCAN-based vehicle or automation nodes, and graphics-capable human-machine interfaces. The 550 MHz Cortex-M7 performance can reduce reliance on external compute for signal processing and control, while integrated connectivity can reduce board-level component count when the selected firmware and driver stack support those peripherals.
A critical design consideration is that the H723 ordering code, package suffix, pin multiplexing, and hardware revision must match the PCB footprint and bill of materials exactly. Review power sequencing, decoupling, external-memory routing, high-speed signal integrity, thermal conditions, and debug programming requirements in the manufacturer datasheet. LCSC listed the device in stock at $12.0658, but current quantity-tier pricing beyond that single reference requires confirmation.
This product synthesis combines the verified manufacturer datasheet reference with distributor specifications, sourcing information, and engineering-oriented design guidance. It does not treat generic STM32H7 claims as verified unless they appear in the supplied data, and it directs engineers to the official PDF for complete pin-level and electrical details.
Pilihan pengganti yang segera untuk STM32H723VGH6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32H723VGH6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Instruction Set, Product Type, RoHS Status.
STM32H725VGH3
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32H723VGH6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit Arm Cortex-M7 microcontroller |
| CPU Maximum Frequency | 550 MHz |
| Instruction Set | Arm 32-bit |
| Core | Arm Cortex-M7 |
| Digital Signal Processing | High-performance MCU with DP-FPU |
| Flash Memory | 1 MB (1M x 8) |
| RAM | 564 KB |
| Cache | L1 cache |
| External Memory Interface | Supported |
| Ethernet | Supported |
| USB | Supported |
| FDCAN Peripherals | 3 |
| Analog-to-Digital Converters | 2 x 16-bit ADC |
| Graphics Support | Supported |
| Kemasan | 100-TFBGA, 8 mm x 8 mm |
| Jenis Pemasangan | Surface mount |
| Aras MSL | MSL 3 |
| RoHS Compliance | RoHS3 compliant |
| REACH Compliance | Unknown |
| Supply Status | Active |
Panduan Konfigurasi Pin STM32H723VGH6 100-tfbga, 8 mm x 8 mm
Konfigurasi pin untuk STM32H723VGH6 (100-tfbga, 8 mm x 8 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32H723VGH6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32H723VGH6 patut untuk 6 aplikasis: Industrial Motor Control, FDCAN Networked Equipment, Ethernet-Connected Control Systems, USB-C Enabled Embedded Products, Data Acquisition and Signal Processing, Graphics-Capable Human-Machine Interfaces.
Industrial Motor Control
The STM32H723VGH6 fits high-speed industrial motor-control designs because its verified 550 MHz Cortex-M7 core and DP-FPU support execute control algorithms with substantial processing headroom. The three integrated FDCAN peripherals provide a basis for distributed communication between drives, sensors, and supervisory controllers, while the two 16-bit ADCs can support precision analog acquisition when their electrical and timing requirements match the design. The 564 KB RAM also permits larger working buffers than many simpler control MCUs. However, motor-output pins, complementary timer channels, analog limits, and protection requirements were not supplied and must be confirmed in the official datasheet before schematic approval.
Disebarkan
FDCAN Networked Equipment
The STM32H723VGH6 is appropriate for distributed industrial equipment requiring three FDCAN peripherals on one MCU. This can reduce the number of separate communication controllers while keeping the 550 MHz Cortex-M7 available for motion logic, diagnostics, and application processing. Its 564 KB RAM and L1 cache can help separate real-time tasks from protocol and control workloads, subject to the MCU's documented memory architecture. Engineers should verify transceiver requirements, bus topology, termination, isolation, fault handling, and the exact peripheral pin assignments in the official package and electrical documentation.
Disebarkan
Ethernet-Connected Control Systems
STM32H723VGH6 suits industrial controllers and smart equipment that combine real-time control with Ethernet connectivity. Its verified 550 MHz Cortex-M7 core can execute protocol and application tasks, while 1 MB flash and 564 KB RAM provide more memory than resource-constrained microcontrollers. The L1 cache and external memory interface may improve performance in data-intensive workloads, but actual throughput depends on clocks, bus contention, memory configuration, and firmware design. Ethernet magnetics, PHY selection, isolation, signal integrity, MAC configuration, and firmware licensing should be reviewed as complete subsystem requirements before production release.
Disebarkan
USB-C Enabled Embedded Products
The STM32H723VGH6 can support compact embedded products that need USB connectivity alongside substantial embedded processing. Its 550 MHz Arm Cortex-M7 core, 1 MB flash, and 564 KB RAM leave room for protocol stacks, control functions, and local data processing beyond basic USB-device applications. The verified data confirms USB support but does not identify speed, class, endpoint arrangement, or power-management details, so developers must verify those specifications in the official datasheet. Board design also requires correct connector layout, protection, signal integrity, firmware stack support, and host-versus-device testing.
Disebarkan
Data Acquisition and Signal Processing
The STM32H723VGH6 is suitable for local signal-processing and data-acquisition equipment because the verified feature set combines a 550 MHz Cortex-M7 core, DP-FPU, L1 cache, 564 KB RAM, and two 16-bit ADCs. This combination can accelerate filtering, control, and data preparation without relying entirely on an external processor. The ADC count and resolution alone do not establish accuracy or acquisition bandwidth; input ranges, sampling rates, trigger sources, reference quality, SNR, and acquisition modes must be confirmed from the manufacturer datasheet. Analog layout also needs careful grounding, filtering, reference routing, and calibration planning.
Disebarkan
Graphics-Capable Human-Machine Interfaces
STM32H723VGH6 fits graphics-capable operator panels and machine interfaces when high-speed control and display-related processing must share one MCU. The verified 550 MHz Cortex-M7 core, 564 KB RAM, and 1 MB flash provide resources for graphics rendering, touch or control logic, communications, and diagnostics, while the external memory interface may support additional frame or asset storage. Graphics peripheral details, display interfaces, framebuffer limits, and external-memory performance were not supplied and require datasheet review. The selected panel, memory bus, LCD interface, touch controller, and thermal environment must be validated as one complete design.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32H723VGH6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32H725VGH3 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 100-TFBGA | 100-TFBGA |
Penyeberangsung Jelas
- High-performance Cortex-M7 processing (vsSTM32H725VGH3)
- Integrated networking and real-time interfaces (vsSTM32H725VGH3)
- Precision analog and graphics resources (vsSTM32H725VGH3)
Catatan Desain
Do not generate the 100-TFBGA footprint or ball assignments from a generic library. Compare the selected STM32H723VG package drawing and pin table against the official datasheet, including ball pitch, ball size, pad dimensions, solder-mask rules, and courtyard. Verify that every power, ground, decoupling, debug, communications, analog, and external-memory ball is accounted for. A mechanically similar BGA footprint can still create assembly defects if pad geometry or thermal-via requirements differ.
Review the complete power-supply, decoupling, voltage-scaling, and brownout requirements in the official documentation before schematic release. The verified search data does not provide input-voltage ranges, current consumption, internal regulators, or external component values, so none should be inferred from the 550 MHz headline frequency. Planned power must cover processor, analog, I/O, external-memory, and communication loads while maintaining approved sequencing and voltage tolerances under temperature and transient conditions.
Route high-speed clocks, communications, and external-memory signals with continuous return paths and controlled geometry. Exact timing, impedance, and topology values cannot be specified from the supplied data; obtain them from the STM32H723 datasheet and the selected external-memory or transceiver documentation. Keep switching and high-current paths away from sensitive analog and reference nets, and use the manufacturer's reference layout guidance when available. Signal-integrity validation should include worst-case loading, voltage thresholds, loss, and external-device timing.
The suffix H6 cannot be treated as interchangeable with H3 solely because both appear in STM32H7 ordering information. Confirm the exact grade, package, pin compatibility, electrical limits, and qualification requirements for every candidate in a cross-reference. Also verify firmware boot configuration, debugger access, clock setup, peripheral availability, pin multiplexing, and software-driver support. A mechanically matching 100-TFBGA package is insufficient evidence for drop-in interchangeability.
Maklumat Kesediaan
PartGenie identifies RoHS3 compliance and MSL 3. The supplied evidence does not verify REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.
