SY89833LMI - 2GHz 1:4 LVDS Clock Buffer | Microchip
MPN: SY89833LMI ✓ AktifSY89833LMI Ringkasan
An LVDS clock buffer is a clock-and-timing semiconductor that regenerates and distributes a high-speed differential clock rather than carrying it directly across a system. In the product hierarchy, this device belongs to clock buffers, then clock and timing ICs, then integrated circuits and semiconductors. Differential signaling, low-voltage swing, and internal termination help support reliable high-speed clock propagation over controlled-impedance interconnects.
The SY89833LMI operates from a 3.3 V supply and supports clock rates up to 2 GHz. Its 1:4 fanout configuration allows one source clock to feed four buffered destinations while limiting fanout-related degradation. The manufacturer describes the device as optimized for ultra-low-skew applications and guarantees within-device skew below 20 ps over supply-voltage and temperature variations.
Differential LVDS outputs and integrated termination distinguish this part from ordinary single-ended CMOS clock buffers. LVDS represents a low-voltage differential signaling method in which current is steered between two conductors. The differential signal can improve noise immunity, while controlled termination helps establish the intended signal environment for the connected clock network.
Typical uses include server and networking clock distribution, communications equipment, high-speed storage systems, instrumentation, and other parallel processing platforms requiring multiple low-skew clock outputs. The device is particularly useful when one incoming differential clock must be translated into an LVDS-compatible fanout for several downstream circuits.
PCB implementation requires careful high-speed layout. Keep the differential input and output traces short, use impedance-controlled routing, provide a continuous ground reference, and place the exposed-pad connection according to the manufacturer’s land pattern and thermal guidance. Differential pair length matching and via symmetry also help minimize edge-to-edge timing degradation.
This page consolidates the manufacturer’s device description with package, interface, application, and engineering guidance. It also distinguishes verified electrical facts from parameters that require confirmation in the latest manufacturer datasheet, helping engineers evaluate the SY89833LMI before committing it to an LVDS clock architecture.
Pilihan pengganti yang segera untuk SY89833LMI — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera SY89833LMI (sama faktor bentuk dan kaki) — berbeza dalam Fanout Ratio, Package, Device Type, Internal Termination, Output Count.
SY89831UMG
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →SY89872UMG
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →SY89832LMI
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
SY89833L
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
SY89831UMG-TR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
SY89833LMI Spesifikasi
| Device Type | 1:4 differential LVDS clock fanout buffer and translator |
| Tegangan Pemberi Arus | 3.3 V |
| Frekuensi Klock Maksimum | 2 GHz |
| Fanout Ratio | 1:4 |
| Input Interface | Differential input-to-LVDS translator |
| Output Interface | Differential LVDS |
| Output Count | 4 differential outputs |
| Internal Termination | Yes |
| Within-Device Skew | Less than 20 ps over supply voltage and temperature |
| Kemasan | 16-VFQFN exposed pad, 16-MLF |
| Package Pin Count | 16 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin SY89833LMI 16 pins
Konfigurasi pin untuk SY89833LMI (16 pins pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk SY89833LMI.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SY89833LMI patut untuk 6 aplikasis: Server and Rack-Server Clock Distribution, Networking and Communications Equipment, High-Speed Storage Controller Systems, High-Speed Instrumentation, Parallel Computing and Processor Interconnects, Low-Skew Test and Measurement Systems.
Server and Rack-Server Clock Distribution
The SY89833LMI fits centralized clock distribution where one differential source must feed several high-speed domains. Its 1:4 configuration supplies four LVDS clock outputs, while the 2 GHz operating capability aligns with demanding processor, memory, and fabric clock networks. The manufacturer-specified within-device skew below 20 ps helps preserve timing relationships between outputs, although total board skew also depends on trace length and downstream loading. Use controlled-impedance differential routing, minimize stub branches, and keep the input and output return path continuous. The 3.3 V supply and exposed thermal pad require a local decoupling network and adequate ground-plane copper for reliable heat transfer.
Disebarkan
Networking and Communications Equipment
The SY89833LMI is applicable in networking and communications equipment that distributes a common differential clock to multiple high-speed processing or interface blocks. A 1:4 fanout reduces the number of separate source-clock connections required at the distribution point, while differential LVDS outputs support noise-resistant transfer over controlled-impedance board traces. The device is particularly relevant where clocks operate near its stated 2 GHz limit and where skew consistency matters more than a low standalone channel count. Route every differential output as a coupled pair, avoid unequal via counts between conductors, and place test points only where their loading will not materially disturb edge timing.
Disebarkan
High-Speed Storage Controller Systems
The SY89833LMI can distribute a differential reference clock to storage controllers, serializers, or interface bridges that require several synchronized copies. Its differential input-to-LVDS translation function allows an upstream clock source to feed four compatible destinations without relying on four unrelated fanout paths. The manufacturer describes the device as optimized for ultra-low-skew operation, with within-device skew guaranteed below 20 ps over supply-voltage and temperature. System-level timing should also account for input-to-output latency, receiver thresholds, and length matching. Maintain a continuous ground plane beneath the routes and use the exposed-pad land pattern specified by Microchip for both electrical return and thermal performance.
Disebarkan
High-Speed Instrumentation
The SY89833LMI is suitable for instrumentation that requires one differential reference clock to drive several acquisition, conversion, or processing chains. Four LVDS outputs can establish a common timing reference across parallel channels, reducing the number of independent clock sources that must be characterized. The 2 GHz capability is useful for demanding sampling architectures, while the low-skew objective supports repeatable measurement timing. Engineers should still evaluate the complete timing chain, including source jitter, cable or PCB delay, receiver tolerance, and the bandwidth of downstream circuitry. Short, matched differential routes and a low-impedance reference plane are essential when preserving clock-edge integrity.
Disebarkan
Parallel Computing and Processor Interconnects
The SY89833LMI can support parallel computing systems in which several processor, accelerator, or fabric clock domains need closely related copies of a master differential clock. The 1:4 fanout provides a straightforward distribution architecture, and the less-than-20 ps within-device skew specification helps bound output-to-output timing variation across voltage and temperature. That bound does not eliminate skew introduced by PCB traces, so each destination should use matched routing or compensation where necessary. Keep clock traces away from noisy power-converter areas and high-speed data paths where crosstalk could affect the small differential LVDS signal amplitude.
Disebarkan
Low-Skew Test and Measurement Systems
The SY89833LMI can serve as the central distribution element in a low-skew test or measurement system requiring multiple synchronized differential clocks. The manufacturer’s ultra-low-skew positioning, 2 GHz frequency capability, and one-to-four differential fanout make it useful for driving parallel acquisition or timing-reference channels. Accurate measurements depend on more than the IC alone: source jitter, input-to-output latency variation, PCB delay, and receiver tolerance all contribute to the final timing relationship. Use matched layer transitions where practical, avoid unnecessary test-point stubs, and verify the complete output-eye and jitter performance on the assembled board.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk SY89833LMI — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | SY89831UMG | SY89872UMG | SY89832LMI | SY89833L | SY89831UMG-TR |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad, 16-MLF | 16-VFQFN exposed pad, 16-MLF |
| Surface-Mount Configuration | 16-pin exposed-pad QFN | 16-pin exposed-pad QFN | 16-pin exposed-pad QFN | 16-pin exposed-pad QFN | 16-pin exposed-pad QFN | 16-pin exposed-pad QFN |
Penyeberangsung Jelas
- Four differential LVDS outputs from one differential input (vsSY89832LMI)
- Input-to-LVDS translation in the same clock-distribution device (vsSY89872UMG)
- Specified ultra-low within-device skew (vsSY89831UMG)
- Direct 2 GHz operating-point support (vsSY89872UMG)
Catatan Desain
Route the differential input and all four LVDS output pairs as impedance-controlled coupled traces with a continuous ground reference. Keep the pairs as short as practical, use the same number of vias on each conductor whenever possible, and avoid adding unterminated test-point stubs near the outputs. The manufacturer’s less-than-20 ps within-device skew specification does not include PCB propagation differences, so destination-to-destination timing may require matched routing or calibration.
Follow the Microchip land pattern for the 16-VFQFN exposed-pad package and connect the exposed pad to the appropriate ground plane using the manufacturer’s thermal-via recommendation. Place local 3.3 V decoupling close to the supply pin and provide a low-impedance return path for the differential signals. Validate the completed layout for target-impedance continuity and use the exposed-pad copper area to improve heat spreading rather than isolating it from the ground plane.
Confirm the exact input logic levels, output amplitude, termination method, and receiver requirements in the Microchip datasheet before finalizing the clock network. The SY89833LMI includes internal termination, but the correct use of that feature depends on the source and receiver implementation. Avoid placing external terminations that conflict with the intended differential impedance, and validate the design with eye, jitter, and skew measurements rather than relying only on nominal edge-rate calculations.
A matching 16-pin footprint does not by itself establish drop-in compatibility. Before replacing the SY89833LMI, compare the clock input type, output standard, fanout ratio, supply voltage, enable or termination pins, exposed-pad connection, and output mapping. Treat reel or temperature suffixes as orderable variants rather than different electrical functions, and place the manufacturer-approved package marking information on the assembly drawing for traceability.
Maklumat Kesediaan
The manufacturer description and distributor excerpts do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes from the current Microchip product documentation before qualification.