Texas Instruments

TAS5100ADAP - 30W Mono Class-D Audio Power Stage | TI

MPN: TAS5100ADAP ✗ Akhir Hayat
32-pin HTSSOP with exposed PowerPAD Package 1 kHz Speed
MOQ: 1 |

TAS5100ADAP Ringkasan

The Texas Instruments TAS5100ADAP is a mono Class-D true-digital audio amplifier power stage rated for 30 W output and packaged in a 32-pin HTSSOP PowerPAD. It is designed to drive an external loudspeaker efficiently while accepting digital audio signals from a compatible PWM audio processor. The device provides 93 dB dynamic range in a TDAA system and specifies THD+N of 0.08% at 1 kHz when delivering 30 W RMS into a 6 ohm load.

A Class-D audio power stage is an amplifier topology that switches current through the output devices rather than dissipating a continuous linear signal. This approach supports high power efficiency, reportedly exceeding 90% into an 8 ohm load, while reducing heat and power-conversion loss compared with a conventional linear output stage. Within the signal-chain hierarchy, the TAS5100ADAP is an audio amplifier IC and digital power-output stage intended to follow a compatible digital audio PWM processor.

Key characteristics include 30 W RMS output capability, 93 dB system dynamic range, 0.08% THD+N at 30 W into 6 ohms, and power efficiency above 90% into an 8 ohm load. Its digital input arrangement makes it suitable for systems that process audio in the digital domain before converting it into a high-power speaker drive stage. The exposed thermal pad supports removal of heat from the package when the PCB and thermal design are appropriate.

The TAS5100A is based on Texas Instruments True Digital Audio Amplifier, or TDAA, technology. In this architecture, digital audio information reaches the power-output stage, allowing the amplifier to perform the final high-current conversion efficiently. The device is intended for use with a compatible TAS50xx-family digital audio processor rather than as a conventional analog-input Class-D amplifier. Careful filtering, supply selection, and thermal management remain necessary to reproduce low distortion and maintain reliability at substantial output power.

Typical uses include powered speakers, sound bars, home-theater equipment, compact stereo systems, multimedia speakers, and other consumer audio products requiring efficient mono amplification. The 30 W capability is particularly relevant where a woofer, subwoofer, or full-range driver operates near the upper portion of the device's power range. The external speaker interface should be designed around the supported output topology and power capability described by the manufacturer.

PCB layout is a central design consideration for this power stage. Keep the exposed pad connected to a suitable thermal copper area, place power-supply and output-path components close to their functional pins, and follow the manufacturer layout guidance for high-current switching paths. Wide copper and short connections help reduce resistance and parasitic inductance, while effective thermal design prevents junction temperature from rising beyond the device's operating limits.

This page combines manufacturer-document characteristics, sourcing guidance, application-specific implementation notes, and a structured comparison of identified same-family drop-in candidates. These engineering details help designers distinguish true pin-compatible replacements from higher-power family members that require closer review of electrical limits and thermal behavior.

Pilihan pengganti yang segera untuk TAS5100ADAP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TAS5100ADAP (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type.

Texas Instruments
Package: 32-pin HTSSOP
Product Type: Stereo Class D Audio Power Amplifier
Bandingkan Dengan TAS5100ADAP →

TAS5100AIDAPR

✅ Masuk Drop-In
📦 32-pin HTSSOP PowerPAD
Industrial temperature grade versus the commercial grade of TAS5100ADAP; both are identified as 30 W TAS5100A-family power stages.

📋 Alternatif rujukan (tidak dalam katalog)

TAS5110DADG4

✅ Masuk Drop-In
📦 32-pin HTSSOP PowerPAD
TAS5110A family is identified as a 50 W-per-channel power stage versus 30 W for TAS5100ADAP, a 66.7% higher rated output.

📋 Alternatif rujukan (tidak dalam katalog)

TAS5110DADADR

✅ Masuk Drop-In
📦 32-pin HTSSOP PowerPAD
TAS5110A family provides a 50 W-per-channel rating versus 30 W for TAS5100ADAP, while retaining the same TDAA power-stage family.

📋 Alternatif rujukan (tidak dalam katalog)

TAS5110DADR

✅ Masuk Drop-In
Texas Instruments
📦 32-pin HTSSOP PowerPAD
Stereo Class D Audio Power Amplifier · Texas Instruments · 2 channels · Stereo · 50 W per channel · Class D · 3.3 V PWM audio stream · 32-pin HTSSOP

Hubungi untuk harga

Lihat Datasheet →

TAS5100AIDAP

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 32-pin HTSSOP PowerPAD
Industrial-grade ordering variant of the 30 W TAS5100A family; the primary distinction from TAS5100ADAP is temperature grade rather than output power.

📋 Alternatif rujukan (tidak dalam katalog)

TAS5100ADAP Penilaian maksimum & Ciri-ciri Elektrik

Product Type True Digital Audio Amplifier PWM Power Output Stage
Channel Configuration 1 channel (mono)
Amplifier Class Class D
Maximum Rated Output Power 30 W
Dynamic Range 93 dB in a TDAA system
THD+N 0.08% at 1 kHz and 30 W RMS into 6 ohms
Power Efficiency >90% into an 8 ohm load
Test Load 6 ohm and 8 ohm loads
Test Frequency 1 kHz
Kemasan 32-pin HTSSOP with exposed PowerPAD
Number of Terminals 32 terminals
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Commercial
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin TAS5100ADAP rectangular

Konfigurasi pin untuk TAS5100ADAP (rectangular pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai rectangular untuk TAS5100ADAP

Tiada data garisan pin yang diperoleh untuk TAS5100ADAP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TAS5100ADAP patut untuk 6 aplikasis: Powered Subwoofer, Powered Bookshelf Speaker, Home Theater Sound Bar, Multimedia Speaker, Consumer Audio Amplifier Module, Portable Speaker.

🎧

Powered Subwoofer

The TAS5100ADAP fits a compact powered subwoofer that requires efficient mono drive from a digital audio signal chain. Its 30 W output capability aligns with the 30 W RMS distortion condition specified at 1 kHz into a 6 ohm load, while the reported efficiency above 90% into 8 ohms helps reduce amplifier-stage heat in an enclosed cabinet. The device operates as a digital PWM output stage, so the system must pair it with a compatible TAS50xx-family audio processor and implement the prescribed speaker-output filtering. Thermal design should center on the exposed PowerPAD and its PCB copper area. Confirm supply limits, protection behavior, and speaker load tolerance before selecting the amplifier for a production subwoofer.

🔊

Powered Bookshelf Speaker

The TAS5100ADAP can provide the mono amplification stage for a powered bookshelf speaker whose driver operates near 30 W. The device's 93 dB system dynamic range supports low-distortion playback, and the datasheet specifies 0.08% THD+N when delivering 30 W RMS into a 6 ohm load at 1 kHz. Because the architecture is true-digital rather than analog-input Class D, the speaker system needs a compatible digital audio processor, suitable clock and control connections, and the manufacturer-recommended output network. A small enclosure can benefit from efficiency above 90% into an 8 ohm load, but the designer should still calculate expected loss and provide adequate exposed-pad heat spreading.

📺

Home Theater Sound Bar

The TAS5100ADAP is suitable for the woofer or auxiliary speaker channel of a home-theater sound bar when digital audio processing and a 30 W target are appropriate. Its mono Class-D topology simplifies allocation of one amplifier channel to a dedicated driver, and the 93 dB TDAA dynamic range can contribute to clean reproduction across the system's digital signal chain. The implementation must account for the higher output capability of some TAS5110A-family candidates: TAS5100ADAP is the closer choice when the original amplifier is specified around a 30 W limit. Keep the power-supply path compact, provide a stable thermal plane under the PowerPAD, and verify every digital interface connection against the selected processor.

💻

Multimedia Speaker

The TAS5100ADAP can serve a multimedia speaker or compact stereo system when one channel is assigned to the TAS5100A digital power stage. At 30 W, it is best matched to small drivers or conservative listening levels rather than high-impedance requirement without calculation. The stated 0.08% THD+N at 30 W RMS into 6 ohms provides a defined performance point for design review, while efficiency above 90% into 8 ohms supports lower switching-stage loss. A practical implementation requires a compatible digital source and PWM processor rather than a conventional analog audio input. Verify supply voltage, startup behavior, output filtering, speaker protection, and thermal performance across the intended enclosure temperature.

⚡

Consumer Audio Amplifier Module

The TAS5100ADAP is appropriate for a modular consumer audio amplifier whose digital processor and speaker interface are designed around the TAS5100A platform. A 30 W mono output stage gives the module useful power without requiring the higher 50 W-per-channel rating associated with TAS5110A-family candidates. Its surface-mount HTSSOP PowerPAD package supports compact board construction, although the exposed pad must be tied to a substantial thermal copper area and connected with an appropriate via pattern. Digital audio quality is supported by the 93 dB system dynamic range, while the specified 0.08% THD+N provides a clear benchmark for a 6 ohm, 30 W operating condition.

📱

Portable Speaker

The TAS5100ADAP can be considered for a portable or battery-powered speaker when the amplifier's supply, efficiency, and 30 W thermal requirements match the available power budget. Efficiency above 90% into an 8 ohm load can reduce amplifier conversion loss, but battery regulation, peak power, speaker impedance, and enclosure temperature must be evaluated together. The true-digital architecture requires a compatible processor and adds control or synchronization considerations beyond a conventional analog Class-D stage. The 32-pin HTSSOP PowerPAD outline favors compact PCB construction, yet high-current copper and thermal-via design remain essential. Confirm the device's exact operating limits and all processor interfaces in the manufacturer documentation before platform release.

Ringkasan Produk Disebarkan

TAS5100AIDAPR Same-family 30 W industrial-grade power-stage candidate Dipergunakan di: Powered Subwoofer, Home Theater Sound Bar, Consumer Audio Amplifier Module TAS5110DADR Texas Instruments Dipergunakan di: Powered Subwoofer, Multimedia Speaker TAS5100AIDAP Same-family industrial-grade power-stage candidate Dipergunakan di: Powered Bookshelf Speaker, Multimedia Speaker, Portable Speaker TAS5110DADADR Higher-power TDAA output-stage family candidate Dipergunakan di: Powered Bookshelf Speaker, Consumer Audio Amplifier Module TAS5110DADG4 Higher-power TDAA power-stage family candidate Dipergunakan di: Home Theater Sound Bar, Portable Speaker
What is the TAS5100ADAP and what does it do?
The TAS5100ADAP is a Texas Instruments 30 W mono Class-D true-digital audio amplifier power stage in a 32-pin HTSSOP PowerPAD package. According to the manufacturer datasheet, it is a True Digital Audio Amplifier PWM output stage designed to work with a compatible digital audio processor, providing up to 30 W output, 93 dB system dynamic range, and 0.08% THD+N at 1 kHz into 6 ohms.
What is the output power of TAS5100ADAP?
The TAS5100ADAP is rated for 30 W output in the Texas Instruments datasheet. The stated distortion condition is 0.08% THD+N at 1 kHz while delivering 30 W RMS into a 6 ohm load, while efficiency exceeds 90% into an 8 ohm load. The exact sustainable output also depends on supply voltage, load impedance, PCB thermal design, and ambient temperature.
Where can I download the TAS5100ADAP datasheet PDF?
The TAS5100ADAP manufacturer datasheet can be downloaded from the Texas Instruments document hosted by Mouser at the datasheet URL on this page. The document identifies the device as a True Digital Audio Amplifier TAS5100A PWM Power Output Stage and provides the electrical, thermal, package, and application information needed to evaluate the device. Use the pin-description table and application circuit in that document when assigning PCB connections.
Where can I find the TAS5100ADAP pinout?
The TAS5100ADAP pin assignments are found in the pin-description table of the manufacturer datasheet for the 32-pin HTSSOP PowerPAD package. This page does not reproduce an unverified terminal map because a complete package-terminal list requires exact cross-checking against the document. Use the datasheet pin table together with the exposed-pad land pattern and layout example when assigning tracks and verifying the digital audio interface.
Is TAS5100ADAP suitable for driving a subwoofer?
The TAS5100ADAP can suit a subwoofer design when its 30 W capability, digital input architecture, supply limits, and thermal requirements match the speaker. Its 0.08% THD+N at 30 W RMS into 6 ohms and efficiency above 90% into 8 ohms are favorable for compact powered speakers. Because it is a true-digital power stage, the design also needs a compatible digital audio PWM processor and suitable output filtering.
TAS5100ADAP vs TAS5110DADR - which is better for a powered speaker?
TAS5100ADAP is the more conservative choice when the speaker system is designed around the 30 W output class of the TAS5100A. TAS5110DADR belongs to a related higher-power family described in comparison material as capable of 50 W per channel. Either candidate must be checked against the same HTSSOP footprint, required digital processor interface, supply voltage, thermal design, and protection requirements before it can be treated as a drop-in substitution.
What is the difference between TAS5100ADAP and TAS5100AIDAPR?
TAS5100ADAP is the commercial-grade 30 W TAS5100A power stage, while TAS5100AIDAPR is an industrial-grade ordering variant identified in comparison results. The core TDAA output-stage function and 30 W class align, making TAS5100AIDAPR the closer functional match among the identified alternatives. Its temperature grade differs, so it may be preferable for industrial environments while still requiring final package, marking, and procurement verification.
When should I choose TAS5100ADAP over TAS5110DADR?
Choose TAS5100ADAP when the amplifier is specifically designed around the TAS5100A's 30 W output class, the accompanying digital processor supports its interface, and the existing PCB is known to work with that device. A TAS5110DADR may provide additional power capability, but that higher rating must be balanced against its electrical limits, thermal requirements, output-filter expectations, and verified pin compatibility. The higher output alone does not establish drop-in equivalence.
What can replace TAS5100ADAP?
TAS5100AIDAPR is the closest identified same-brand replacement candidate because it retains the TAS5100A 30 W architecture while changing the ordering temperature grade. Other same-family parts in the comparison set include TAS5110DADR, TAS5110DADADR, and TAS5110DADG4, but their higher output ratings require renewed verification of the digital interface, supply, filtering, thermal design, and pin mapping before substitution.
Is TAS5100ADAP the same as TAS5110DADR?
No. The TAS5100ADAP is a 30 W TAS5100A power stage, whereas comparison material describes TAS5110DADR as a 50 W-per-channel TAS5110A device. Both belong to the True Digital Audio Amplifier product family and appear in HTSSOP-related comparison records, but output capability and implementation limits differ. Treat TAS5110DADR as a candidate only after checking every pin and electrical limit against the original design.
Where can I buy TAS5100ADAP online?
Use the Request a Quote form on this page to request TAS5100ADAP availability, current lot conditions, and commercial terms. Because this part is identified as obsolete, availability may depend on legacy inventory, traceability, and whether the requested package and marking are acceptable for the application. Request a written quotation that states the exact MPN, condition, packaging, and any manufacturer traceability requirements.
What is the price of TAS5100ADAP?
Current commercial pricing for TAS5100ADAP should be obtained through the Request a Quote form on this page rather than a static price table. The part is obsolete, so unit cost can vary with inventory age, lot traceability, quantity, and whether an assembly or distribution channel is used. Include the required quantity, target date, and inspection or traceability requirements in the request for an actionable quotation.
What is the lead time for TAS5100ADAP?
The current lead time for TAS5100ADAP should be confirmed through the Request a Quote form on this page. As an obsolete part, delivery timing may depend on available legacy stock, component marking, traceability documents, and inspection requirements. Submit the required quantity and production schedule, then require the supplier to state the lead time and any minimum-order quantity in the quotation.
Is TAS5100ADAP in stock?
TAS5100ADAP stock status must be confirmed for the exact orderable MPN through the Request a Quote form on this page. The device is an obsolete 32-pin HTSSOP PowerPAD part, and a generic listing does not establish the quantity, condition, or traceability of available inventory. Request confirmation of stock, lot date, marking, packaging, and any applicable inspection documentation before committing the component to production.
What are the key specifications of TAS5100ADAP that engineers should know?
The key TAS5100ADAP specifications are 30 W output, mono Class-D operation, a 32-pin HTSSOP PowerPAD package, 93 dB dynamic range in a TDAA system, 0.08% THD+N at 1 kHz and 30 W RMS into 6 ohms, and efficiency above 90% into an 8 ohm load. According to the manufacturer datasheet, the device is a digital PWM power-output stage and therefore requires a compatible digital audio processor rather than a conventional analog Class-D input.
How should a TAS5100ADAP audio amplifier PCB be laid out?
The TAS5100ADAP PCB should provide a continuous thermal copper area beneath the exposed PowerPAD, short high-current supply and output paths, and placement of power decoupling close to the device. Follow the manufacturer datasheet layout for the exposed-pad via pattern and output-filter network. Estimated: the power stage must dissipate conduction and switching losses while producing 30 W into a 6 ohm load, making copper area, via count, and ambient temperature central to reliable operation.
Does TAS5100ADAP meet RoHS, REACH, or automotive qualification requirements?
The RoHS, REACH, and automotive-qualification status of TAS5100ADAP should be taken from the current manufacturer product record or a lot-specific declaration of conformity. The commercial-grade designation visible in product records does not by itself establish AEC-Q100 qualification. Request the applicable compliance documents from the supplier through the Request a Quote form, especially for obsolete inventory that may have changed distribution channels over time.

Data referensi kejuruteraan untuk TAS5100ADAP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TAS5100ADAP when maintaining an existing 30 W mono audio power-stage design, particularly where the companion digital processor and PCB layout were designed around the TAS5100A family. Its documented 93 dB system dynamic range, 0.08% THD+N at 30 W into 6 ohms, and efficiency above 90% into 8 ohms provide useful design targets. TAS5100AIDAPR is the closest identified alternative when industrial temperature grading is desirable, but marking and ordering details must still be confirmed. Consider TAS5110DADR, TAS5110DADADR, or TAS5110DADG4 only when the higher 50 W-per-channel family can satisfy the system requirements and its complete datasheet confirms pin, interface, filtering, and thermal compatibility. For legacy or obsolete production, preserve the original device whenever its behavior and availability are acceptable; otherwise treat every same-family substitution as a controlled engineering change rather than a simple stock substitution.

Perbandingan dengan Gantian

Parametr Produk Ini TAS5100AIDAPR TAS5110DADG4 TAS5110DADADR TAS5110DADR TAS5100AIDAP
Package 32-pin HTSSOP PowerPAD 32-pin HTSSOP PowerPAD 32-pin HTSSOP PowerPAD 32-pin HTSSOP PowerPAD 32-pin HTSSOP PowerPAD 32-pin HTSSOP PowerPAD
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Family TAS5100A TAS5100A TAS5110A TAS5110A TAS5110A TAS5100A
Rated Output Power 30 W 30 W 50 W per channel 50 W per channel 50 W per channel 30 W
Special Features Equibit and PurePath Digital technology family Equibit and PurePath Digital technology family Equibit and PurePath Digital technology family Equibit and PurePath Digital technology family Equibit and PurePath Digital technology family Equibit and PurePath Digital technology family

Penyeberangsung Jelas

  • Closest identified replacement preserves the 30 W TAS5100A power class (vsTAS5110DADR)
  • Commercial-grade ordering option (vsTAS5100AIDAPR)
  • Defined performance at a high-output speaker load (vsTAS5100AIDAP)

Catatan Desain

Treat the exposed PowerPAD as the primary thermal path. Estimated: a 30 W output into a 6 ohm load corresponds to approximately 9.6 V RMS across the load; actual power-conversion loss depends on the supply, switching losses, and filtering. Use a broad uninterrupted PCB copper area beneath the pad, an appropriate via array, and the manufacturer thermal information when sizing the thermal path. Recheck the junction and ambient temperature limits at the maximum expected load and enclosure temperature.

Place power-supply decoupling and output-path components close to the relevant device connections, and minimize loop area in the high-current switching paths. Follow the manufacturer layout for the exposed-pad vias, digital input routing, analog supply connections, and speaker-output network. Wide traces reduce resistance, while short connections limit parasitic inductance. Do not route sensitive digital or analog signals beneath the switching-output region or through the thermal-pad area.

TAS5100ADAP is a digital PWM power-output stage rather than a conventional analog-input Class-D amplifier. Verify clocking, control, data, and any error or status signals against the companion TAS50xx-family processor and the manufacturer pin-description table. Use the prescribed output-filter components and speaker network; changing filter values can affect stability, attenuation of switching products, THD+N, and the usable load impedance.

Do not treat a higher-power TAS5110A-family device as automatically interchangeable. Although the candidates use the same HTSSOP PowerPAD outline, TAS5110DADR and its related orderings are described as 50 W-per-channel devices, compared with 30 W for TAS5100ADAP. Before substitution, confirm pin functions, supply limits, digital timing, output-filter values, thermal resistance, and protection behavior against the exact alternative datasheet.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The component is identified as commercial grade, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 qualification is not indicated; automotive requirements should not be inferred from the commercial-grade designation.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TAS5100ADAP datasheet TAS5100ADAP specifications TAS5100ADAP pinout TAS5100ADAP datasheet pdf TAS5100ADAP replacement TAS5100ADAP equivalent TAS5100ADAP cross reference TAS5100ADAP vs TAS5110DADR Texas Instruments TAS5100ADAP TAS5100ADAP 30W Class D amplifier TAS5100ADAP HTSSOP PowerPAD TAS5100ADAP powered speaker TAS5100ADAP price TAS5100ADAP stock

Komponen dan Tanda berkaitan

Texas Instruments TAS5100ADAP TAS5100A TAS5100AIDAPR TAS5100AIDAP TAS5110DADG4 TAS5110DADADR TAS5110DADR True Digital Audio Amplifier TDAA Class-D amplifier PWM power output stage digital audio amplifier IC audio power amplifier 32-pin HTSSOP PowerPAD QFN family surface-mount package Equibit PurePath Digital speaker output filter THD+N dynamic range power efficiency powered subwoofer
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ