TAS5616PHD - 160W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5616PHD ✓ AktifTAS5616PHD Ringkasan
A Class-D amplifier is a switching power amplifier that converts a digital or analog input into a pulse-width-modulated output waveform. This approach belongs to the broader power-amplifier hierarchy and can deliver high output power efficiently when the switching stage, output filter, power supply, and thermal system are designed correctly. The TAS5616PHD targets high-power audio products where low total harmonic distortion, wide signal bandwidth, and compact output-stage construction are important.
Key features include a 300 W mono output rating, a 160 W stereo output rating, a 25 V to 52.5 V supply range, integrated closed-loop feedback, digital input, and signal bandwidth extending to 80 kHz. These characteristics make the amplifier suitable for powered speakers, home-theater systems, professional audio equipment, soundbars, and compact consumer-audio products requiring more output power than a conventional analog audio amplifier can provide efficiently.
PurePath HD feedback is the principal technical distinction of this device. The feedback system monitors the output stage and corrects switching behavior, supporting improved audio fidelity while retaining the efficiency associated with Class-D operation. Because the device is a digital-input power stage, the system designer must also address the digital audio interface, clocking, signal integrity, switching-node layout, output filtering, and electromagnetic compatibility between the amplifier and its speakers.
Typical applications include a 300 W subwoofer power stage, a 160 W stereo speaker amplifier, a powered bookshelf speaker, a home-theater receiver, and a compact high-output audio system. The 64-terminal exposed-pad package requires deliberate PCB copper and thermal management; the thermal pad is an electrical connection as well as a heat-spreading structure and must be connected according to the manufacturer layout guidance.
The primary design trade-off is that a 52.5 V-class power stage requires a suitably rated supply, carefully laid-out switching nets, and an output-filter strategy appropriate for the selected speaker impedance and bandwidth. Verify DC offset, thermal performance, filter stability, and amplifier protection behavior with the intended speakers rather than assuming that nominal power ratings represent unrestricted continuous output in every enclosure.
Pilihan pengganti yang segera untuk TAS5616PHD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TAS5614APHDR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TAS5616PHD Penilaian maksimum & Ciri-ciri Elektrik
| Amplifier Type | Class D digital-input audio power stage |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Maximum Mono Output Power | 300 W |
| Maximum Stereo Output Power | 160 W |
| Supply Voltage Range | 25 V to 52.5 V |
| Signal Bandwidth | 80 kHz |
| Feedback Architecture | Integrated closed-loop feedback |
| Input Type | Digital input |
| Package Type | 64-terminal HTQFP exposed-pad package |
| Package Dimensions | 14 mm x 14 mm |
| Terminal Count | 64 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Package Code | HTQFP |
| Exposed Thermal Pad | Yes |
| Temperature Grade | Commercial |
| Depop Feature | Yes |
Panduan Konfigurasi Pin TAS5616PHD htqfp
Konfigurasi pin untuk TAS5616PHD (htqfp pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk TAS5616PHD.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TAS5616PHD patut untuk 6 aplikasis: 300 W Subwoofer Power Stage, 160 W Stereo Speaker Amplifier, Home-Theater Receiver Output Stage, Powered Bookshelf Speaker, Professional Audio Monitor Amplifier, Soundbar Speaker Amplifier.
300 W Subwoofer Power Stage
The TAS5616PHD fits a high-power subwoover amplifier because it supports up to 300 W mono operation from a 25 V to 52.5 V supply. Its digital input can preserve a clean digital-audio path from the system processor to the power stage, while integrated closed-loop feedback supports controlled Class-D output behavior. The implementation must include correctly rated speaker output filtering, supply decoupling, protection, and a low-impedance exposed-pad layout. Verify continuous output and thermal rise with the intended speaker impedance and enclosure rather than relying only on the headline power rating.
Disebarkan
160 W Stereo Speaker Amplifier
The TAS5616PHD can provide 160 W stereo output in a compatible two-channel design using its digital-input Class-D architecture. This configuration suits powered speakers and compact high-output receivers where switching efficiency is valuable. The digital audio interface should be routed with controlled impedance and clock integrity, and the two outputs require application-specific LC filtering for the target speaker impedance. Thermal performance depends on the 52.5 V maximum supply, continuous output level, PCB copper, and enclosure heat rejection, so prototype testing should confirm both acoustic output and device temperature.
Disebarkan
Home-Theater Receiver Output Stage
A digital-input TAS5616PHD can serve as the final Class-D stage in a home-theater receiver or active speaker system. Its 300 W mono and 160 W stereo capabilities cover demanding subwoofer and surround-channel loads, while PurePath HD integrated feedback provides a controlled switching-output architecture. Integrating the stage requires a compatible digital-audio source, clocking and data routing, speaker filters, protection logic, and a supply designed for the 25 V to 52.5 V operating range. Account for startup behavior, DC blocking, idle noise, and thermal limits during system verification.
Disebarkan
Powered Bookshelf Speaker
The TAS5616PHD suits a powered bookshelf speaker requiring more output power and PCB area efficiency than a conventional analog output stage. Digital input allows the speaker electronics to receive a processed signal directly, while the 64-terminal HTQFP exposed-pad package concentrates substantial output capability into a compact surface-mount footprint. The design must provide local high-current supply distribution, a compliant speaker filter, short switching connections, and enough exposed-pad copper to remove heat. Validate thermal performance in the final enclosure because internal volume and ambient temperature can materially change permissible continuous output.
Disebarkan
Professional Audio Monitor Amplifier
The TAS5616PHD can be evaluated for powered studio monitors, stage speakers, and other professional audio products that require a high-output digital-input power stage. The device offers up to 160 W stereo operation, an 80 kHz stated signal bandwidth, and integrated closed-loop feedback within a 14 mm by 14 mm HTQFP footprint. Those characteristics support compact multiway amplifier boards, but crossover and filter design remain critical for a monitor system. Place output filtering according to the manufacturer guidance, maintain short high-current paths, and verify distortion, clipping behavior, and thermal performance with representative loads.
Disebarkan
Soundbar Speaker Amplifier
The TAS5616PHD fits a soundbar or compact multimedia amplifier when several high-power channels must be driven from digital audio sources. Its support for mono or stereo operation allows design flexibility, and its 300 W mono capability covers a subwoofer while 160 W stereo operation covers left and right channels. A practical implementation needs separate speaker filtering, digital routing among channels, local bulk capacitance, and careful separation between sensitive audio data and high-current switching power. The exposed thermal pad and supply components should be placed to minimize thermal coupling while preserving the required package footprint.
Disebarkan
Data referensi kejuruteraan untuk TAS5616PHD — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TAS5614APHDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP exposed-pad package, 14 mm x 14 mm | 64-HTQFP exposed-pad package |
| Amplifier Class | Class D | Class D |
Penyeberangsung Jelas
- High mono output capability in a digital-input Class-D stage (vsTAS5614APHDR)
- Dual mono and stereo operating modes (vsTAS5614APHDR)
- Wide high-power supply operating range (vsTAS5614APHDR)
Catatan Desain
Treat the 64-terminal exposed thermal pad as a mandatory thermal and electrical structure rather than an optional heat sink. Provide a multilayer PCB with a thermal-via array beneath the pad, keep the exposed-pad net consistent with the manufacturer pin guidance, and provide continuous copper wherever the footprint permits. Validate junction temperature and output power in the finished enclosure because the stated 300 W mono and 160 W stereo ratings depend on the specified test conditions.
Place local input and output decoupling at the package power terminals, keep high-current supply and ground paths short, and avoid routing digital-audio signals beneath or between switching-power nets. The output switching connections must remain compact, while the exposed-pad via field should provide both electrical connection and thermal spreading. Follow the manufacturer layout and component-placement guidance when defining the power loop and exposed-via geometry.
Do not interpret the 300 W or 160 W ratings as guaranteed speaker output without checking the supply voltage, load impedance, thermal condition, and test configuration. Also avoid replacing the integrated digital interface with a conventional analog input without a compatible converter and clock architecture. Confirm output-filter values against the selected speaker impedance and verify DC offset, clipping, protection, and thermal behavior on hardware.
Maklumat Kesediaan
The manufacturer information identifies a commercial temperature grade but does not state the requested compliance certifications. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer product documentation before regulatory use.