Texas Instruments

TMS320C44PDB60 - 60 MHz 32-Bit Floating-Point DSP | Texas Instruments

MPN: TMS320C44PDB60 ✗ Akhir Hayat
304-pin PQFP Package 60 MHz Speed
MOQ: 1 |

TMS320C44PDB60 Ringkasan

The Texas Instruments TMS320C44PDB60 is a 32-bit floating-point digital signal processor operating at 60 MHz, delivering 30 MIPS, 330 MOPS, and 60 MFLOPS in a 304-pin PQFP package measuring 40 x 40 mm. Its four communication ports and six-channel direct-memory-access architecture support parallel data transfer across demanding digital signal-processing systems. The TMS320C44PDB60 is designed for applications that require deterministic real-time computation, high-throughput parallel transfers, and a broad set of peripheral interfaces.

A digital signal processor, or DSP, is a specialized semiconductor that executes mathematical operations efficiently on sampled or streamed data. Unlike a general-purpose microprocessor, a DSP is optimized for filtering, transform, correlation, signal-generation, and control workloads. The TMS320C44 belongs to the Texas Instruments C4x family of parallel-processing DSPs, combining a 32-bit floating-point processing architecture with multiple communication channels and direct-memory-access support. This hierarchy places it within application-specific processors rather than conventional microcontrollers or host CPUs.

The headline processing characteristics are a 60 MHz clock, 33 ns instruction-cycle time, 30 MIPS execution rate, 330 MOPS total operations capability, and 60 MFLOPS floating-point performance. Four communication ports provide parallel interfaces for moving data between the processor, memory, and external signal-processing hardware. A six-channel DMA engine reduces the processing burden associated with data transfers, which is particularly valuable in applications involving multiple high-rate data channels.

The processor performs 32-bit floating-point arithmetic, making it suitable for algorithms that require a broad numerical range without implementing separate fixed-point scaling routines. Its parallel architecture can service several external data streams concurrently, reducing the need for separate processing elements in sophisticated signal-processing equipment. The 304-pin PQFP package exposes the extensive communication and memory resources needed by this device, although that large lead count requires careful PCB routing and a substantial land pattern.

Typical applications include industrial communications, data-acquisition systems, real-time imaging, speech processing, vibration analysis, and embedded control with substantial signal-processing requirements. The four communication ports can support concurrent data sources, while the six-channel DMA system is useful when peripherals or external memory must transfer blocks of data without excessive processor intervention. These characteristics make the device suitable for equipment designed around parallel, real-time data streams.

A critical design consideration is the PCB footprint. The 304-pin, 40 x 40 mm PQFP package demands fine-pitch fanout, careful decoupling around the power rails, controlled return paths, and signal-integrity-aware routing. Designers should also treat thermal dissipation and power-supply current transients as layout constraints because the high pin count provides extensive interface connectivity around the processor.

This page consolidates the verified processor identity, package information, performance figures, interface resources, and engineering considerations into one reference. It also documents the available same-family pin-compatible option while clearly separating confirmed characteristics from parameters that require confirmation in the manufacturer datasheet before final design release.

Pilihan pengganti yang segera untuk TMS320C44PDB60 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TMS320C44PDB60 (sama faktor bentuk dan kaki) — berbeza dalam Clock Frequency, Instruction Cycle Time, Package Dimensions.

Texas Instruments
Clock Frequency: 50 MHz
Instruction Cycle Time: 40 ns
Package Dimensions: 40 mm x 40 mm
Bandingkan Dengan TMS320C44PDB60 →

TMS320C44PDB50

✅ Masuk Drop-In
Texas Instruments
📦 304-pin PQFP
32-bit floating-point digital signal processor · 50 MHz · 40 ns · 25 MIPS · 32 bit · Floating point · 4 ports · 6 channels

Hubungi untuk harga

Lihat Datasheet →

TMS320C44PDB60 Spesifikasi

Device Type 32-bit floating-point digital signal processor
Clock Frequency 60 MHz
Instruction Cycle Time 33 ns
Data Word Width 32 bit
Arithmetic Type Floating-point
MIPS Rating 30 MIPS
Operation Rate 330 MOPS
Floating-Point Performance 60 MFLOPS
Communication Ports 4 ports
DMA Channels 6 channels
Package Type 304-pin PQFP
Package Dimensions 40 x 40 mm
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin TMS320C44PDB60 40 x 40 mm

Konfigurasi pin untuk TMS320C44PDB60 (40 x 40 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 40 x 40 mm untuk TMS320C44PDB60

Tiada data garisan pin yang diperoleh untuk TMS320C44PDB60.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TMS320C44PDB60 patut untuk 6 aplikasis: Industrial Data Acquisition, Real-Time Vibration Analysis, Parallel Communication Processing, Digital Signal Analysis Instrumentation, Embedded Audio Processing, Machine Vision Processing.

🏭

Industrial Data Acquisition

The TMS320C44PDB60 fits multi-channel industrial acquisition systems that must process sampled data while external sources transfer blocks concurrently. Its 60 MHz clock, 30 MIPS rating, and 330 MOPS capability provide useful real-time computation headroom, while four communication ports and six DMA channels help separate incoming data streams. Place the processor between the acquisition front end and working memory, and use DMA for sustained transfers so the CPU can concentrate on filtering, scaling, and control calculations.

🔧

Real-Time Vibration Analysis

The TMS320C44PDB60 is appropriate for vibration-monitoring equipment that must analyze rapidly changing sensor data with predictable execution timing. Its 32-bit floating-point architecture avoids the fixed-point scaling constraints that can complicate some transform and filtering algorithms, while the 60 MHz operating point supports a 33 ns instruction-cycle time. The six-channel DMA system can feed multiple buffers, and the four communication ports can coordinate acquisition, storage, and host control within the same embedded instrument.

🌐

Parallel Communication Processing

TMS320C44PDB60 can serve in communication equipment requiring concurrent handling of several external streams. Four communication ports provide multiple physical channels, and the six-channel DMA engine can move data with less processor intervention than a design that relies entirely on CPU copying. The 60 MHz clock and 330 MOPS rating allow protocol processing, filtering, and buffer management to coexist. Designers should assign communication and DMA resources according to the manufacturer pin table and avoid introducing unnecessary branch or round-trip cycles.

📊

Digital Signal Analysis Instrumentation

The TMS320C44PDB60 suits laboratory and industrial instruments that perform continuous numerical analysis rather than occasional general-purpose computation. Its 32-bit floating-point engine supports filtering, transforms, and correlation, while the 60 MFLOPS rating establishes a useful baseline for algorithm evaluation. Parallel communication ports can connect converters, memory, and a control interface, and DMA can sustain high-rate sample movement. Validate numerical scaling and latency against the actual algorithm before fixing the clock and memory configuration.

🎧

Embedded Audio Processing

The TMS320C44PDB60 can be evaluated for embedded audio workloads that require floating-point filters, correlation, or spectral processing within a parallel architecture. Its 330 MOPS capability and 60 MHz clock provide processing capacity beyond simple control tasks, while four communication ports can organize audio input, output, and control traffic. DMA is particularly useful for maintaining sample flow. The design must still account for the large PQFP footprint, external memory behavior, clock requirements, and exact audio peripheral assignments documented by the manufacturer.

📺

Machine Vision Processing

The TMS320C44PDB60 is relevant to machine-vision controllers that combine high-volume pixel movement with real-time numerical operations. Four communication ports can support parallel connections among image acquisition, memory, and downstream processing resources, while six DMA channels help prevent data movement from monopolizing the processor. Its 32-bit floating-point architecture and 60 MFLOPS rating are useful for filtering, correlation, and feature calculations. Deployment should be conditioned on sustained bandwidth, memory timing, and thermal performance in the final enclosure.

What are the key specifications of TMS320C44PDB60?
The TMS320C44PDB60 is a 32-bit floating-point digital signal processor with a 60 MHz clock, 33 ns instruction-cycle time, 30 MIPS rating, 330 MOPS capability, and 60 MFLOPS performance. According to the manufacturer datasheet listing, it also includes four communication ports and a six-channel direct-memory-access engine. The device is packaged in a 304-pin PQFP measuring 40 x 40 mm, making it intended for complex parallel-processing systems rather than compact embedded products.
What is TMS320C44PDB60 used for?
The TMS320C44PDB60 is used for real-time digital signal processing involving filtering, transforms, correlation, waveform generation, and high-rate data movement. Its 60 MHz clock and 32-bit floating-point arithmetic support numerically demanding algorithms, while four communication ports and six DMA channels help connect multiple external data sources efficiently. It is particularly relevant to industrial communications, data acquisition, imaging, vibration analysis, speech processing, and other parallel-stream signal-processing systems.
Where can I download the TMS320C44PDB60 datasheet PDF?
The TMS320C44PDB60 datasheet PDF can be accessed through the manufacturer data-sheet listing linked on this page. The listing identifies the device as a digital signal processor and provides access to the TMS320C44 family documentation. When using the PDF, verify the pin-description table, recommended operating conditions, clock requirements, memory interface details, and power-supply sequencing because those device-level values are not reproduced in the product summary.
Where can I find the TMS320C44PDB60 pinout?
The TMS320C44PDB60 pinout must be taken from the manufacturer datasheet because the device has 304 leads and its complete signal assignments cannot be inferred from the package name. The verified component information confirms a 304-pin PQFP package, but it does not reproduce every pin number or function. Use the datasheet pin-description table to assign power, ground, clock, memory, communication-port, DMA, and control signals before laying out the PCB.
What is the difference between TMS320C44PDB60 and TMS320C44PDB50?
The principal confirmed difference is clock frequency: TMS320C44PDB60 operates at 60 MHz, while TMS320C44PDB50 is the 50 MHz member of the same TMS320C44 family. This represents a 20 percent frequency difference between the two devices. Their shared family architecture and package relationship make the PDB50 variant relevant for pin-compatible design comparison, but final substitution still requires checking the manufacturer pin table, memory timing, electrical limits, and software timing assumptions.
TMS320C44PDB60 vs TMS320C44PDB50: which is better for real-time processing?
The TMS320C44PDB60 is better when maximum instruction throughput is the deciding requirement because its 60 MHz clock is 20 percent higher than the 50 MHz TMS320C44PDB50. Both devices belong to the same TMS320C44 family and are relevant to the same real-time signal-processing class. Choose PDB50 when existing timing, power, or qualification constraints make the lower-speed member preferable, and choose PDB60 when processing headroom is more important than that trade-off.
When should I choose TMS320C44PDB60 over TMS320C44PDB50?
Choose TMS320C44PDB60 when the processing schedule benefits from the higher 60 MHz operating frequency, the algorithm has limited computation headroom, or the design needs greater parallel throughput. Choose TMS320C44PDB50 when the existing system is validated at 50 MHz or when lower-frequency operation is acceptable and can simplify timing or thermal constraints. Because both members are associated with the same TMS320C44 family, verify software timing and pin-level electrical requirements before changing the installed device.
Is TMS320C44PDB60 suitable for industrial data acquisition?
The TMS320C44PDB60 is suitable for many industrial data-acquisition systems that require deterministic numerical processing and concurrent data movement. Its four communication ports can organize multiple external channels, while six DMA channels support efficient transfers between peripherals and memory. Suitability ultimately depends on sample rate, channel count, timing, environmental requirements, and availability of a supported configuration. Confirm supply-voltage limits, operating temperature, and lifecycle constraints before production release.
What can replace TMS320C44PDB60?
The TMS320C44PDB50 is the closest identified same-family drop-in candidate because it belongs to the TMS320C44 family and differs principally in its 50 MHz clock instead of 60 MHz. That 20 percent reduction can affect computation margin, so it is not automatically equivalent for timing-critical software. No verified cross-manufacturer, 304-pin drop-in replacement was identified. Review the manufacturer pin table, electrical limits, clock setup, memory timing, and application timing before approving a replacement.
Is TMS320C44PDB50 the same as TMS320C44PDB60?
The TMS320C44PDB50 is not identical to the TMS320C44PDB60 because their clock frequencies differ: 50 MHz versus 60 MHz. They are closely related TMS320C44 family members, making PDB50 a candidate for footprint-compatible review, but the 20 percent performance difference can change software timing and real-time processing margin. Treat the substitution as acceptable only after checking the exact pinout, electrical characteristics, timing values, and system-level workload against the manufacturer datasheet.
What is the best Texas Instruments equivalent for TMS320C44PDB60?
The best identified Texas Instruments-family candidate is the TMS320C44PDB50, which retains the TMS320C44 product family while operating at 50 MHz rather than 60 MHz. Its 20 percent lower clock frequency is the central engineering difference and may require additional timing margin in computation-heavy designs. No other verified drop-in alternative with the same package and function was identified. A footprint match alone is insufficient; confirm pin assignment, supply conditions, memory behavior, and software performance.
Where can I buy TMS320C44PDB60 online?
Use the Request a Quote form on this page to ask about TMS320C44PDB60 availability, sourcing support, and current commercial terms. Because the device is a legacy 304-pin DSP, its lifecycle status and supply position should be confirmed for the exact MPN before committing a production schedule. Do not assume that a listing page implies current stock. Provide the required quantity, target date, shipment destination, and acceptable package condition when requesting the quotation.
What is the price of TMS320C44PDB60?
The current commercial price for TMS320C44PDB60 should be requested through the Request a Quote form on this page. Pricing for legacy DSPs can vary with quantity, procurement volume, date, condition, and market availability, so a fixed historical figure may not represent current purchasing terms. Submit the required quantity and target delivery date to obtain a current quotation tied to the exact TMS320C44PDB60 MPN.
What is the lead time for TMS320C44PDB60?
The current lead time for TMS320C44PDB60 should be confirmed through the Request a Quote form on this page. Because this is a mature DSP family, lead time may depend on remaining factory supply, authorized-channel availability, and the quantity requested. Provide the annual usage, forecast, and required delivery date so procurement can determine whether an order can be scheduled without relying on an unverified availability statement.
Is TMS320C44PDB60 in stock?
Current stock for TMS320C44PDB60 must be confirmed through the Request a Quote form on this page. The product is identified as an obsolete Texas Instruments DSP, which makes lifecycle planning and exact-MPN availability more important than for an active processor. A request should identify the required quantity, delivery date, and acceptable sourcing conditions. Procurement can then confirm allocation and supply timing for the exact 304-pin PQFP device.
How should the TMS320C44PDB60 PCB be laid out?
The TMS320C44PDB60 PCB should use a manufacturer-compliant 304-pin PQFP land pattern, place power and ground connections according to the datasheet, and route high-speed memory and communication signals with continuous return paths. The 40 x 40 mm package also requires adequate fanout and thermal copper. Use the pin-description table for exact assignments and follow the recommended decoupling and layout diagrams in the manufacturer documentation rather than inferring connections from the package outline.

Data referensi kejuruteraan untuk TMS320C44PDB60 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TMS320C44PDB60 when an existing system specifically depends on its 60 MHz clock, 33 ns instruction-cycle time, and real-time processing margin. Choose TMS320C44PDB50 when the application can meet its timing requirements at 50 MHz, where the 20 percent lower clock rate may provide a better fit for the design and supply situation. The PDB50 is the closest identified same-family drop-in candidate, but exact compatibility still requires confirmation of pin assignments, memory timing, electrical limits, and software timing. No verified cross-manufacturer drop-in replacement with the same 304-pin package was identified, so changing to another manufacturer would constitute a redesign rather than a substitution. For new designs, compare the legacy C4x architecture against currently supported signal-processing processors, including development-tool availability, software support, lifecycle status, and system-level power requirements.

Perbandingan dengan Gantian

Parametr Produk Ini TMS320C44PDB50
Brand Texas Instruments Texas Instruments
Package 304-pin PQFP 304-pin PQFP
Clock Frequency 60 MHz 50 MHz
Frequency Difference Baseline 20% lower
Instruction Cycle Time 33 ns 40 ns
Data Width 32 bit 32 bit
Arithmetic Floating-point Floating-point

Penyeberangsung Jelas

  • Higher same-family clock frequency (vsTMS320C44PDB50)
  • Parallel communication and transfer architecture (vsTMS320C44PDB50)
  • High-throughput floating-point processing (vsTMS320C44PDB50)

Catatan Desain

Use the manufacturer land pattern for the 304-pin PQFP rather than creating a footprint from body dimensions alone. Confirm pin pitch, lead span, exposed-pad or thermal-option details, and solder-mask clearance from the package drawing. The 40 x 40 mm package requires adequate routing escape channels, so review courtyard and component-to-component spacing before placing memory, clocks, and decoupling around the device.

Route memory and communication-port signals as matched, continuous paths with nearby return planes. Avoid splitting the ground reference beneath high-speed nets, and follow the manufacturer's recommended topology for clock distribution. Because the processor supports parallel data movement through four communication ports and six DMA channels, simultaneous switching can create edge-sensitive crosstalk; control edge rates and provide suitable termination where the interface specification requires it.

Do not approve a hardware revision using only the 60 MHz headline frequency. Check clock-input requirements, memory timing, reset behavior, interrupt topology, pin multiplexing, and supply sequencing against the manufacturer datasheet. A 33 ns instruction-cycle time does not guarantee that every memory or peripheral access completes in one cycle; external-memory and bus-latency assumptions must be included in real-time scheduling.

Plan copper area and airflow around the large PQFP package before finalizing enclosure geometry. The device's processing capability is achieved through a high-pin-count architecture with extensive interface connectivity, so switching activity and power delivery should be evaluated under the worst expected workload. Use the manufacturer thermal information for the exact package rather than estimating performance from package area, and verify junction temperature in the assembled system.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer and distributor summaries do not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact TMS320C44PDB60 ordering code. AEC-Q100 qualification is not indicated because this is a general-purpose legacy DSP rather than an automotive-qualified variant.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TMS320C44PDB60 datasheet TMS320C44PDB60 specifications TMS320C44PDB60 pinout TMS320C44PDB60 datasheet pdf Texas Instruments TMS320C44PDB60 TMS320C44PDB60 60MHz DSP TMS320C44PDB60 304-pin PQFP TMS320C44PDB60 equivalent TMS320C44PDB60 replacement TMS320C44PDB60 vs TMS320C44PDB50 TMS320C44PDB60 price TMS320C44PDB60 stock

Komponen dan Tanda berkaitan

Texas Instruments TMS320C44PDB60 TMS320C44PDB50 TMS320C44 C4x architecture digital signal processor DSP 32-bit floating-point processor parallel processor semiconductor communication port direct memory access DMA 60 MHz 30 MIPS 330 MOPS 60 MFLOPS 33 ns instruction cycle time 304-pin PQFP 40 x 40 mm package surface-mount package real-time signal processing industrial data acquisition machine vision
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ