TMS320VC5441PGF - 133MHz 16-Bit Fixed-Point DSP | 176-LQFP | Texas Instruments
MPN: TMS320VC5441PGF ✓ AktifTMS320VC5441PGF Ringkasan
What is a fixed-point digital signal processor? A DSP is a microprocessor optimized for the multiply-accumulate operations that dominate filtering, correlation, FFT and signal-conditioning math. A fixed-point architecture represents each sample as a signed integer with a fixed binary-point position, which keeps the internal datapath integer-based and deterministic. The TMS320VC5441 belongs to the TI C5000 family, the hierarchy being DSP -> fixed-point DSP -> C5000 series -> real-time embedded signal processor.
Key features of this device include a 16-bit word size, a 16-bit external data bus, and a 133 MHz clock rate, giving roughly 133 million instruction cycles per second of dedicated arithmetic throughput. The 176-pin LQFP (24x24 mm) footprint exposes the parallel host interface, external memory interface and the dedicated serial ports that the C5000 architecture provides for multi-channel audio and telecom traffic.
The C5000 architecture uses a Harvard-style split between program and data space, allowing fetch and data access to occur in parallel. That structure, combined with hardware multiplier-accumulator units, is what allows deterministic real-time processing of audio streams, echo cancellation, modem front ends and industrial control loops at a fixed instruction rate.
Typical deployments include multichannel audio processing for telephony and broadcast equipment, voice-band modem and echo-canceller front ends, motor and power inverter control in industrial drives, and any embedded system that must execute a fixed filter or transform routine on a strict sample clock.
When designing around this device, budget the supply rails carefully: the 1.60 V core and 3.30 V I/O rails each need clean, separately decoupled power, and the 176-pin surface-mount footprint demands careful via-in-pad-aware routing on a multilayer board to keep return paths short under clock-edge-sensitive conditions.
This page brings together manufacturer specifications, lifecycle and compliance status, drop-in package alternatives, and practical design guidance so that engineers can evaluate the TMS320VC5441PGF against equivalent C5000-family options before committing a 176-LQFP land pattern to production.
Pilihan pengganti yang segera untuk TMS320VC5441PGF — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TMS320VC5441PZP
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
TMS320VC5441PGF Spesifikasi
| Device Type | Fixed Point Digital Signal Processor (DSP) |
| Frekuensi Klock Maksimum | 133 MHz |
| Word Size | 16 bit |
| External Data Bus Width | 16 bit |
| Core Supply Voltage | 1.60 V |
| I/O Supply Voltage | 3.30 V |
| Package Type | 176-LQFP (24x24 mm) |
| Package Designation | PGF |
| Jenis Pemasangan | Surface Mount |
| Kiraan Pin | 176 pins |
| Manufacturer | Texas Instruments |
| Product Series | TMS320VC5441 series, C5000 fixed-point DSP |
| Status RoHS | Compliant (ROHS3) |
| Lead Free Status | Lead free |
Panduan Konfigurasi Pin TMS320VC5441PGF pgf
Konfigurasi pin untuk TMS320VC5441PGF (pgf pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk TMS320VC5441PGF.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TMS320VC5441PGF patut untuk 6 aplikasis: Multichannel Audio Processing, Voice-Band Modem and Echo-Canceller Front End, Industrial Motor and Power Inverter Control, Telephony Line-Card Signal Conditioning, Fixed-Point Filter and Transform Acceleration, Broadcast and Audio Equipment Audio Path.
Multichannel Audio Processing
The TMS320VC5441PGF fits multichannel audio processing because its 133 MHz 16-bit fixed-point core can sustain several full-rate PCM channels while the C5000 architecture keeps arithmetic deterministic. With a 1.60 V core supply and a 3.30 V I/O supply, the device accepts external audio codec data over the parallel host interface and moves it through the serial ports with deterministic latency. The 176-LQFP (24x24 mm) footprint gives access to the full external memory and serial interface set, so a board can host multiple codec channels plus shared memory. Trade-off: the fixed-point datapath requires scaling discipline, so headroom must be planned for intermediate filter gain.
Disebarkan
Voice-Band Modem and Echo-Canceller Front End
The TMS320VC5441PGF is well suited to voice-band modem and echo-cancellation front ends, where sample-rate deterministic convolution and adaptive filtering must run continuously without loss. At 133 MHz the fixed-point core provides the multiply-accumulate throughput needed for full-rate echo cancellation alongside tone generation and detection. The 16-bit external data bus lets the device interface directly to standard DSP codecs and to external memory for long adaptive filters. Designers should keep the external memory interface timing margin generous, because sustained echo-canceller coefficient traffic is the main source of memory-bound stalls.
Disebarkan
Industrial Motor and Power Inverter Control
The TMS320VC5441PGF supports industrial motor and power inverter control loops where deterministic execution timing is a hard requirement rather than a preference. The 133 MHz fixed-point core is fast enough to run current sampling, PI control and PWM update in one loop period, and the deterministic instruction rate makes the control timing analysable. The 1.60 V core rail keeps switching losses low in a converter that already dissipates significant power. Care must be taken to isolate the sensitive 1.60 V core supply from the noisy power stage, and to keep the ground return of the 3.30 V I/O domain separate from switching nodes.
Disebarkan
Telephony Line-Card Signal Conditioning
The TMS320VC5441PGF is used in telephony line-card signal conditioning where echo cancellation, ringing generation and codec interfacing must coexist on a shared card. Its 176-lead LQFP exposes the parallel host interface and dedicated serial ports needed to bridge to line-driver codecs without external glue logic. The 3.30 V I/O supply matches conventional line-card codec levels, which reduces level translation and reduces board area. The engineering trade-off is routing density on a 0.5 mm pitch 176-pin package, which needs careful layer changes and ground-plane stitching to keep the external memory interface timing margins.
Disebarkan
Fixed-Point Filter and Transform Acceleration
The TMS320VC5441PGF is appropriate as a dedicated filter or transform accelerator in embedded systems where a general-purpose host cannot meet the sample-rate deadline. The 133 MHz clock and dedicated multiplier-accumulator hardware let convolution, correlation and FFT butterflies run in real time on fixed-point data with reproducible results run after run. Its 1.60 V core supply reduces core power in battery- or fan-limited installations, while the 3.30 V I/O rail keeps interfacing with existing 3.3 V peripherals simple. Designers must budget the fixed-point binary-point position per stage to avoid overflow in accumulators.
Disebarkan
Broadcast and Audio Equipment Audio Path
The TMS320VC5441PGF can serve as the audio processing engine in broadcast and professional audio equipment that needs fixed latency and repeatable gain staging. Its 16-bit fixed-point datapath matches the word length of common audio codecs and DA converters, avoiding format conversions in the signal chain. At 133 MHz the device handles equalisation, dynamics processing and routing tables for several channels simultaneously. The key layout constraint is that the 176-lead LQFP fan-out makes it easiest to place the device centrally with short, impedance-controlled routes to both the codec cluster and the decoupling network for the 1.60 V core rail.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TMS320VC5441PGF — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TMS320VC5441PZP |
|---|---|---|
| Package | 176-LQFP (24x24 mm), PGF | 176-LQFP (24x24 mm) - same footprint |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | Fixed Point Digital Signal Processor (DSP) | Fixed Point Digital Signal Processor (DSP) |
| Maximum Clock Frequency | 133 MHz | 133 MHz |
| Word Size | 16 bit | 16 bit |
| External Data Bus Width | 16 bit | 16 bit |
| Core Supply Voltage | 1.60 V | 1.60 V |
| I/O Supply Voltage | 3.30 V | 3.30 V |
| Pin Count | 176 pins | 176 pins |
Penyeberangsung Jelas
- Only drop-in path that preserves the 176-LQFP land pattern and firmware (vsTMS320VC5441PZP)
- 133 MHz 16-bit fixed-point core balances throughput against power in embedded designs (vsTMS320VC5441PZP)
- Documented single-part sourcing path instead of a multi-vendor redesign (vsTMS320VC5441PZP)
Catatan Desain
The TMS320VC5441PGF needs two clean rails: 1.60 V for the core and 3.30 V for the I/O domain. Place a dedicated high-frequency ceramic decoupling set for each rail close to the device supply pins, with a bulk capacitor per rail at roughly one-tenth of the distance to the source. Tie the core and I/O ground references at a single, controlled point near the device return pins so that switching current from the 3.30 V domain does not modulate the 1.60 V core reference. Estimated: at 133 MHz with roughly 20% activity, the core-domain dynamic current is on the order of 60-100 mA, so the 1.60 V rail must be sourced from a low-noise regulator with the ripple budget of a clocked core.
A 176-lead LQFP on a 24x24 mm body forces dense escape routing, so plan the layer stack before placing the device. Assign the 16-bit parallel data bus and address lines to the same or adjacent layers with a continuous reference plane underneath, avoid any split across a plane boundary, and keep the external memory interface traces short and matched. Use via-in-pad or micro-via fanout where the process allows, and place the device centrally between the codec or memory cluster and the connector that carries data off board. Keep switching or high-current return paths out of the region directly under the clock and bus lines.
The two most common mistakes with this part are mixing up the PGF and PZP ordering codes and ignoring the fixed-point scaling. First, confirm that the board footprint matches 176-LQFP (24x24 mm) and that the selected ordering code meets your temperature requirement before committing to a bare die or reel. Second, fixed-point DSP code carries an implicit binary-point position through every multiply-accumulate stage, and an unmodelled growth in filter gain saturates the accumulator and corrupts the signal. Document the scaling of each stage, and verify the worst-case coefficient set rather than a typical one.
The C5000 core at 133 MHz is fast enough that external memory interface timing becomes a real constraint on a 24x24 mm LQFP. Keep the memory interface data and control lines referenced to a solid ground plane, match the length of the data bus lines to each other rather than to a board-wide average, and keep clock and strobe routing away from the serial port pins that carry audio traffic. Reserve the region under the device for the decoupling network, and keep any analog reference or clock input away from the digital bus on the same layer to avoid coupling of switching noise into the timing reference.
Maklumat Kesediaan
Distributor product listings for TMS320VC5441PGF state RoHS Compliant (ROHS3) and Lead free. Reach, halogen-free and conflict-minerals declarations are not stated in the available listings.