TPA3244DDW - 60W Stereo Class-D Amplifier | Texas Instruments
MPN: TPA3244DDW ✓ AktifTPA3244DDW Ringkasan
A Class-D audio amplifier is a power-management IC that switches its output stage between active and inactive states, reducing the amount of energy dissipated compared with a conventional linear output stage. Within the audio-amplifier hierarchy, the TPA3244DDW combines an analog input interface, integrated power stages, speaker outputs, and thermal management in one package. This integration supports compact stereo and high-power mono designs without requiring discrete output transistors on the board.
The principal feature is its 60 W stereo output rating, with the same device specified for operation as a 120 W mono amplifier. Analog input simplifies compatibility with conventional audio sources, while the 12 V to 31.5 V supply range accommodates common single-rail amplifier architectures. The pad-down HTSSOP package places the exposed thermal pad beneath the device so PCB copper can remove heat from the power stage. Its stated operating range is 0°C to 70°C, making it appropriate for indoor consumer and professional audio equipment where that environmental range is acceptable.
PurePath Ultra-HD technology distinguishes this amplifier from basic Class-D solutions by targeting low output distortion and high-quality audio reproduction. The integrated switching output stage avoids the continuous bipolar dissipation associated with linear amplifier output stages, although efficiency still depends on supply voltage, output power, load impedance, and thermal design. A low-impedance, low-noise supply is important because supply noise and instability can affect the power stage even when the audio input is clean.
Typical uses include powered speakers, active bookshelf speakers, compact home-theater systems, soundbars, subwoofer power stages, and multimedia speaker enclosures. In stereo operation, the amplifier can drive two speaker channels from an analog source. In a bridged mono arrangement, its 120 W capability can serve a subwoofer or high-output monoblock. The 44-pin HTSSOP package requires careful PCB layout, adequate exposed-pad thermal copper, and a clean power-supply connection.
Designers should follow the recommended application diagrams in the manufacturer datasheet, preserve the exposed-pad thermal path, and use the specified input and supply decoupling. Speaker wiring and power-supply connections must be sized for the intended output level. Stereo, bridged mono, and single-ended configurations have different terminal and load constraints, so confirm the selected topology before finalizing the board layout.
This page combines the official device specifications with application guidance, packaging details, and a conservative drop-in assessment. It also distinguishes verified device facts from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware qualification without relying on assumptions.
Pilihan pengganti yang segera untuk TPA3244DDW — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TPA3244DDWR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TPA3244DDW Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Stereo Class-D audio power amplifier |
| Stereo Output Power | 60 W |
| Mono Output Power | 120 W |
| Supply Voltage Range | 12 V to 31.5 V |
| Input Type | Analog input |
| Amplifier Technology | PurePath Ultra-HD Class-D |
| Package Type | 44-pin HTSSOP (DDW), pad-down |
| Kiraan Pin | 44 pins |
| Gambaran Suhu Operasi | 0°C to 70°C |
| Gaya Pemasangan | Surface mount |
| Channel Configuration | 2-channel stereo or mono bridge configuration |
| Output Topology | Class-D bridge-tied output |
| Thermal Pad | Pad-down exposed thermal pad |
Panduan Konfigurasi Pin TPA3244DDW 44-pin htssop (ddw), pad-down
Konfigurasi pin untuk TPA3244DDW (44-pin htssop (ddw), pad-down pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk TPA3244DDW.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TPA3244DDW patut untuk 6 aplikasis: Powered Bookshelf Speakers, Active Subwoofer Power Stage, Compact Home-Theater System, Multimedia Speaker Amplifier, Wireless Speaker Amplification, Professional Audio Monitor.
Powered Bookshelf Speakers
The TPA3244DDW fits powered bookshelf speakers that require 60 W per stereo channel without a discrete output-transistor stage. Its analog input accepts a conventional line-level source, while PurePath Ultra-HD Class-D operation targets high-fidelity audio reproduction. The device operates from a 12 V to 31.5 V supply, so a suitably rated, low-noise supply can feed both the amplifier and associated system electronics. Use the exposed DDW pad as the primary thermal path and preserve the output-filter and decoupling recommendations in the Texas Instruments datasheet. Continuous output at the upper rating still requires verification against supply capability, speaker impedance, enclosure ventilation, and the maximum operating temperature of 70°C.
Disebarkan
Active Subwoofer Power Stage
The TPA3244DDW can serve as the Class-D output stage of an active subwoofer when configured according to the manufacturer's bridged-mono guidance. Its documented mono capability reaches 120 W, making it appropriate for compact home-theater and powered-monitor subwoofers that need more output than a conventional low-power analog amplifier can provide. The 12 V to 31.5 V supply range allows use of a common single-rail power architecture. The designer must select a speaker impedance supported by the output configuration, implement the required output filtering, and provide substantial copper beneath the exposed pad. Because continuous mono output depends on thermal conditions and supply capability, confirm both with the Texas Instruments application information.
Disebarkan
Compact Home-Theater System
The TPA3244DDW is well suited to compact home-theater power amplifiers because it combines a 60 W stereo output rating with the efficiency and integration of Class-D amplification. It can power two speaker channels directly from an analog audio source, reducing the board area occupied by separate output transistors and heat-sinking hardware. A 12 V supply supports lower-power stereo channels, while the upper end of the 12 V to 31.5 V range allows higher-output configurations when the speakers and thermal design permit. The pad-down HTSSOP requires a continuous copper thermal path, and the output network must follow the recommended Class-D filter and layout guidance to preserve audio quality and stability.
Disebarkan
Multimedia Speaker Amplifier
For powered computer speakers, multimedia monitors, and compact stereo enclosures, the TPA3244DDW provides 60 W stereo capability in a single integrated package. The analog input interface allows connection to line-level sources without adding a dedicated digital audio interface, while the integrated Class-D output stage reduces external component count. Its 44-pin DDW footprint supports compact multilayer PCB designs but requires an exposed-pad land pattern and adequate copper area. Check whether the acoustic enclosure can dissipate the heat associated with sustained playback, because the 0°C to 70°C device range provides only limited upper-temperature margin in sealed equipment. Use the manufacturer application circuit as the basis for input, supply, and output filtering.
Disebarkan
Wireless Speaker Amplification
The TPA3244DDW can amplify the analog audio output from a wireless receiver in smart speakers, wireless bookshelf speakers, and connected audio products. Its 60 W stereo rating provides useful headroom for compact speaker pairs, while Class-D efficiency is valuable in battery- and thermally constrained designs. The device still requires a regulated supply, input conditioning, output filters, and careful thermal construction. Low-noise supply design is particularly important because the manufacturer recommends low-noise, low-output-impedance supplies for the amplifier architecture. The 12 V minimum supply makes system power planning more demanding than designs using 5 V class audio amplifiers, but the device's maximum operating temperature of 70°C should be considered for sealed smart-home products.
Disebarkan
Professional Audio Monitor
The TPA3244DDW is suitable for compact professional audio monitors that require more continuous output than a low-power integrated amplifier can provide. PurePath Ultra-HD technology targets high sound quality, and the 60 W stereo capability can support near-field monitor pairs when the speaker impedance and amplifier configuration are appropriate. Professional monitor designers should account for the 0°C to 70°C operating range, use a quiet linear-regulated supply when required by the signal chain, and maintain generous exposed-pad copper. Texas Instruments recommends low-noise, low-output-impedance supply arrangements, which helps avoid audible or inaudible contamination of the monitoring signal. Final loudspeaker crossover, protection, and filtering decisions should follow the complete manufacturer application design.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TPA3244DDW — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TPA3244DDWR |
|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments |
| Package | 44-pin HTSSOP (DDW), pad-down | 44-pin HTSSOP (DDW), pad-down |
| Stereo Output Power | 60 W | 60 W |
| Mono Output Power | 120 W | 120 W |
| Supply Voltage Range | 12 V to 31.5 V | 12 V to 31.5 V |
| Input Type | Analog input | Analog input |
| Amplifier Technology | PurePath Ultra-HD Class-D | PurePath Ultra-HD Class-D |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C |
| Ordering Suffix | DDW | DDWR reel ordering suffix |
| Thermal Pad | Pad-down exposed thermal pad | Pad-down exposed thermal pad |
Penyeberangsung Jelas
- Integrated 60 W stereo and 120 W mono capability (vsTPA3244DDWR)
- PurePath Ultra-HD Class-D output architecture (vsTPA3244DDWR)
- Single-package thermal and functional integration (vsTPA3244DDWR)
Catatan Desain
Treat the exposed DDW pad as the amplifier's primary thermal connection. Place a full copper land directly beneath the package and extend it into the surrounding PCB without blocking return-current paths. Validate the hottest operating case at the maximum intended output power, highest ambient temperature, and minimum speaker impedance. If the enclosure cannot reject the calculated heat, reduce continuous output, improve airflow, or select a higher thermal-capacity layout before production release.
Use a low-noise, low-output-impedance supply, following the recommended 12 V and power-stage arrangements in the Texas Instruments datasheet. The TPA3244DDW accepts a 12 V to 31.5 V supply, but the usable output also depends on rail voltage and supply current. Keep high-current return paths short and wide, place the required bulk and local decoupling close to the device, and avoid sharing narrow supply traces with analog signal paths.
Copy the manufacturer land pattern and application schematic rather than creating a generic 44-pin HTSSOP footprint. Preserve the exposed-pad solder pattern, adequate via density, input and output component placement, and the stated Class-D output-filter topology. Keep the analog input path away from switching-node and high-current output routing, and maintain a continuous ground reference beneath the power stage to reduce radiated and conducted emissions.
Do not assume that 60 W stereo or 120 W mono is available at every supply voltage, load impedance, or ambient temperature. Confirm the supported speaker impedance, bridge and non-bridge outputs, output filters, protection network, and startup behavior against the current datasheet. Also verify that the enclosure, supply, and PCB thermal design can sustain the intended continuous output rather than relying on short-duration peak capability.
Maklumat Kesediaan
The Texas Instruments product materials identify the device as a 44-pin DDW package operating from 0°C to 70°C, but no explicit environmental or regulatory compliance declarations were identified for this ordering code. Confirm material compliance with the manufacturer before procurement.
