WM8750CLSEFL - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8750CLSEFL ✓ AktifWM8750CLSEFL Ringkasan
An audio codec is an integrated circuit that converts between digital audio data and analog signals. The WM8750 belongs to the codec hierarchy within interface ICs, combining stereo conversion, headphone and speaker output functions, digital audio interfaces, clocking, and analog signal conditioning. This integration reduces the number of discrete components required in portable playback and recording equipment while providing a common control interface for the conversion channels.
The codec uses 24-bit conversion for both its ADC and DAC paths and includes two ADC and two DAC channels for stereo operation. Its digital audio processing can work with master clocks of 12 MHz or 24 MHz for USB devices. Standard master-clock frequencies of 12.288 MHz and 24.576 MHz support common audio rates, including 96 kHz, 48 kHz, and 44.1 kHz, without requiring an external PLL.
The manufacturer datasheet describes flexible master and slave operation, allowing the WM8750 to integrate with a system master clock or provide clocking to another audio device. The 5 mm by 5 mm QFN package supports compact portable-audio layouts, while its exposed-pad construction requires a properly designed PCB thermal and electrical land pattern.
Typical uses include portable media players, USB-connected audio accessories, headphone amplifiers, digital speaker systems, and compact recording products. The combination of stereo conversion, flexible clocking, headphone and speaker outputs, and direct support for widely used sample rates makes the device suitable for designs that require a single audio conversion and output subsystem.
PCB implementation should follow the manufacturer’s reference layout for the 32-QFN footprint, including its exposed thermal pad. Input and output filtering networks, analog ground planning, clock routing, and supply decoupling must be evaluated together to preserve audio performance. The codec should not be treated as a generic digital IC because its usable performance also depends on component tolerances, grounding, and the analog output network.
This product overview combines the verified device identity and package information with clock-rate, channel-count, conversion-resolution, application, and replacement guidance. It also identifies the boundaries of drop-in substitution: a replacement is suitable only when its footprint, electrical behavior, control interface, and clock requirements are confirmed rather than inferred from similar codec functionality.
Pilihan pengganti yang segera untuk WM8750CLSEFL — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
WM8750CLSEFL/R
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
WM8750CLSEFL Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Stereo audio codec |
| ADC Channels | 2 |
| DAC Channels | 2 |
| Conversion Resolution | 24 bit |
| Kemasan | 32-QFN (5 mm x 5 mm) with exposed pad |
| Kiraan Pin | 32 pins |
| Master or Slave Operation | Master or slave |
| USB Master Clock Frequencies | 12 MHz or 24 MHz |
| Standard Master Clock Frequencies | 12.288 MHz or 24.576 MHz |
| Supported Audio Sample Rates | 44.1 kHz, 48 kHz, or 96 kHz |
| External PLL Requirement | Not required for 44.1 kHz, 48 kHz, or 96 kHz |
| Headphone Output | Present |
| Speaker Output | Present |
Panduan Konfigurasi Pin WM8750CLSEFL 32-qfn (5 mm x 5 mm) with exposed pad
Konfigurasi pin untuk WM8750CLSEFL (32-qfn (5 mm x 5 mm) with exposed pad pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk WM8750CLSEFL.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
WM8750CLSEFL patut untuk 6 aplikasis: Portable Media Player, USB Audio Accessory, Headphone Amplifier System, Digital Speaker System, Portable Recording Device, Compact Audio Interface.
Portable Media Player
The WM8750CLSEFL fits a portable media player that requires stereo playback and recording in one compact component. Its two 24-bit DAC channels support the playback path, while two 24-bit ADC channels can capture analog source material, and the integrated headphone and speaker outputs reduce the number of separate output-driver stages. The 5 mm by 5 mm QFN package also conserves board area compared with discrete converter and output circuitry. According to the manufacturer datasheet, the device supports 44.1 kHz, 48 kHz, and 96 kHz sample rates, including operation without an external PLL at supported clock rates. The main engineering consideration is careful analog grounding: analog input and output returns should be planned to minimize converter noise and headphone-channel crosstalk.
Disebarkan
USB Audio Accessory
The WM8750CLSEFL is suitable for a USB-connected portable audio accessory because the manufacturer datasheet identifies 12 MHz and 24 MHz master-clock options for USB devices. A 24 MHz master clock permits supported digital audio rates to be generated directly, while the 24-bit stereo conversion paths provide a consistent interface between USB audio data and analog headphones or line-level circuitry. The device can also operate as a slave when another part supplies the system clock. Designers should verify the digital interface mode, bit-clock relationship, and signal voltage levels against the host controller. Clock routing should remain short and isolated from sensitive analog paths, while the QFN exposed pad requires a complete thermal and electrical land pattern.
Disebarkan
Headphone Amplifier System
The WM8750CLSEFL can form the central conversion and output block of a compact headphone amplifier. Two 24-bit DAC channels provide the stereo digital-to-analog path, while the integrated headphone output reduces the need for a separate output-buffer stage in portable designs. The manufacturer describes the WM8750 family for portable audio applications and supports 44.1 kHz, 48 kHz, and 96 kHz sample rates, allowing the same codec to serve conventional media and higher-rate use cases. Headphone-output stability depends on the selected external load, output network, supply arrangement, and component values stated in the application guidance. PCB designers should keep headphone routing away from clock and digital return paths and provide the QFN exposed pad with a low-impedance connection to ground.
Disebarkan
Digital Speaker System
The WM8750CLSEFL is applicable to a portable digital-speaker subsystem that needs a controlled stereo signal path. Its two DAC channels can generate the analog audio drive signals, and the integrated speaker output simplifies the architecture compared with a separate codec and output stage. The manufacturer datasheet identifies portable audio as a target application and supports standard 44.1 kHz and 48 kHz rates as well as 96 kHz operation from suitable master clocks. Because the loudspeaker load is not merely another high-impedance line output, the external network and output configuration must follow the manufacturer’s application guidance. Thermal and acoustic engineers should also verify the speaker impedance, channel balance, and distortion behavior across the intended output level before production release.
Disebarkan
Portable Recording Device
The WM8750CLSEFL supports a portable stereo-recording design through its two 24-bit ADC channels and two 24-bit DAC channels. The ADC path can accept analog microphone or line signals, while the DAC path supports monitoring or playback within the same package. This integration can reduce board area in compact recorders, although the external microphone amplifier, input filters, and anti-aliasing network remain important analog-system elements. The codec’s master or slave operation allows synchronization with a separate digital-audio controller, and its supported 44.1 kHz, 48 kHz, and 96 kHz rates cover common recording workflows. Signal-chain design should maintain a clean analog ground reference and use the manufacturer’s recommended input and output component values to achieve the intended channel performance.
Disebarkan
Compact Audio Interface
The WM8750CLSEFL can be used in a compact two-channel audio interface when the product needs both recording and playback functions. Its two ADC channels support simultaneous stereo capture, while its two DAC channels provide a matching stereo playback path at 24-bit resolution. The manufacturer datasheet identifies support for 44.1 kHz, 48 kHz, and 96 kHz and describes direct generation of these rates from suitable clocks without an external PLL. This makes the device relevant to semi-professional portable interfaces and audio accessories with USB or embedded digital-audio connectivity. The selected digital interface must match the host processor or USB controller, and input/output filtering must be chosen using the manufacturer’s component tables. Layout should separate sensitive analog routing from digital clock lines.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk WM8750CLSEFL — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | WM8750CLSEFL/R |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 32-QFN (5 mm x 5 mm) with exposed pad | 32-QFN (5 mm x 5 mm) with exposed pad |
| Product Type | Stereo audio codec | Stereo audio codec |
| Conversion Resolution | 24 bit | 24 bit |
| Headphone and Speaker Functions | Headphone output and speaker output | Stereo CODEC with HP and speaker functions |
Penyeberangsung Jelas
- Integrated stereo conversion and output functions (vsWM8750CLSEFL/R)
- Direct support for common sample rates (vsWM8750CLSEFL/R)
- Flexible system clock architecture (vsWM8750CLSEFL/R)
Catatan Desain
Implement the 32-QFN footprint according to the manufacturer’s land-pattern drawing, including the exposed pad, its thermal relief, and the required ground vias. Confirm pad dimensions and solder-mask policy rather than extrapolating them from the 5 mm by 5 mm body size. The exposed pad is part of both the thermal design and the device’s ground connection, so a generic QFN footprint should not be accepted without comparison.
Separate the analog input, analog output, and digital clock regions as far as the package and board constraints allow. Route clocks and data away from headphone and line-output nodes, use a continuous analog-ground reference beneath the analog section, and return converter and output currents to the appropriate quiet-ground area. These measures matter because the codec contains both sensitive analog converters and high-speed digital clocking in the same package.
Do not assume that every stereo codec with the same channel count is a replacement for the WM8750CLSEFL. Confirm pin names, exposed-pad treatment, digital interface format, clock polarity, control-register compatibility, supply levels, and analog component values. WM8750CLSEFL/R is the only same-family ordering alternative documented in the cross-reference information, and its suffix-specific reel orientation should also be checked before production use.
Maklumat Kesediaan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this ordering code. AEC-Q100 is not applicable because the WM8750CLSEFL is an audio codec rather than an automotive-qualified device.