WM8978CGEFL/V - 24-Bit Stereo Codec | Wolfson
MPN: WM8978CGEFL/V ✓ AktifWM8978CGEFL/V Ringkasan
A stereo audio codec is a mixed-signal interface IC that converts digital audio samples into analog signals and accepts analog microphone signals before converting them back into digital audio. In the broader device hierarchy, the WM8978 belongs to the audio codec category, integrates into interface ICs, and ultimately supports portable audio systems such as multimedia phones, digital still cameras, and digital camcorders.
The WM8978CGEFL/V integrates preamplifiers for stereo differential microphones and includes drivers for speakers, headphones, and differential or stereo line outputs. Its published interface format is 24-bit I2S/PCM, while its 32-QFN package measures 5 x 5 mm. This integration can shorten analog routing, reduce external amplifier count, and simplify portable-product layouts when the board area and power budget are tightly constrained.
Its mixed-signal architecture supports a compact portable audio signal chain. Digital audio enters through the I2S or PCM interface, while the codec manages microphone capture and analog playback paths. The 5 x 5 mm QFN-32 package requires careful PCB layout because its exposed thermal pad and fine-pitch perimeter connections affect soldering, return paths, and heat spreading. Exact electrical ratings, sampling rates, clock requirements, and output-power limits must be confirmed from the manufacturer datasheet before layout release.
Typical uses include portable media players, multimedia phones, digital cameras, camcorders, and compact audio accessories. It may also fit smart-home or embedded devices that need one IC for digital-to-analog playback, microphone capture, headphone output, and speaker drive. Designers should confirm that the selected speaker, microphone, and output network remain within the device's electrical and acoustic limits.
A key design consideration is analog layout discipline. Place input and output capacitors near their associated pins, maintain short and symmetric analog routes, keep switching-supply and digital-clock nodes away from microphone inputs, and follow the datasheet reference layout for component selection and exposed-pad connection. Confirm the exact schematic values and pin definitions before production release.
This product page combines the WM8978CGEFL/V interface and package details, replacement considerations, application guidance, comparison parameters, and practical layout notes to support faster component selection and hardware design.
Pilihan pengganti yang segera untuk WM8978CGEFL/V — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
WM8978GEFL/V
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
WM8978CGEFL
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
WM8978
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
WM8978CGEFL/V Spesifikasi
| Product Type | Stereo audio codec with integrated speaker driver |
| Audio Resolution | 24 bit |
| Digital Audio Interface | I2S and PCM |
| Channel Configuration | Stereo |
| Kemasan | 32-QFN, 5 x 5 mm |
| Kiraan Pin | 32 pins |
| Microphone Inputs | 2 stereo differential microphone preamplifier channels |
| Speaker Output | Integrated speaker driver |
| Headphone Output | Integrated headphone driver |
| Line Output | Differential or stereo line-output drivers |
| Power Class | Low-power portable-audio codec |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin WM8978CGEFL/V 32-qfn, 5 x 5 mm
Konfigurasi pin untuk WM8978CGEFL/V (32-qfn, 5 x 5 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk WM8978CGEFL/V.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
WM8978CGEFL/V patut untuk 6 aplikasis: Portable Multimedia Phone, Digital Still Camera, Digital Camcorder, Portable Audio Player, Smart Home Audio Accessory, Compact Embedded Audio Module.
Portable Multimedia Phone
The WM8978CGEFL/V fits a portable multimedia phone that must capture speech while supporting digital music playback through headphones or a small speaker. Its 24-bit I2S/PCM interface connects to the application processor, while the integrated stereo differential-microphone preamplifiers reduce the need for separate microphone amplifiers. The integrated headphone and speaker drivers consolidate several analog functions into one 5 x 5 mm, 32-QFN device. Designers should still budget separate filtering and coupling components exactly as shown in the reference schematic, and verify microphone biasing, speaker impedance, and analog supply requirements before finalizing the board.
Disebarkan
Digital Still Camera
A digital still camera can use the WM8978CGEFL/V to combine microphone recording and playback in a compact portable design. The stereo differential-microphone preamplifiers support two capture channels, while the integrated headphone driver supports monitoring through an earbud or headphone amplifier-compatible load. Digital samples move through the 24-bit I2S or PCM interface to the camera's image-processing or audio subsystem. Keeping these functions in a 5 x 5 mm QFN-32 package helps limit board area, but careful grounding and short analog routing are necessary to prevent microphone and image-processing circuitry from coupling noise into the captured signal.
Disebarkan
Digital Camcorder
The WM8978CGEFL/V is suitable for a digital camcorder requiring integrated audio capture, headphone monitoring, line-level output, and speaker playback. The 24-bit I2S/PCM digital interface provides a clear connection to the video-processing platform, while the integrated analog blocks reduce the number of external amplifiers in a portable enclosure. Its small 5 x 5 mm surface-mount package supports dense board layouts, although camcorder power and thermal conditions should be checked against the exact datasheet ratings. Analog and digital return paths should be separated carefully to preserve microphone-headroom and playback fidelity during simultaneous recording and monitoring.
Disebarkan
Portable Audio Player
For a portable audio player, the WM8978CGEFL/V consolidates digital-to-analog playback, headphone output, speaker drive, and optional microphone capture. Its 24-bit I2S/PCM interface supports connection to a digital audio source, while the integrated output drivers reduce the external analog component count. The 32-QFN 5 x 5 mm package is useful where enclosure space is constrained, and the low-power portable-audio focus aligns with battery-powered equipment. Layout should follow the manufacturer's reference circuit, including the prescribed output-network components and a continuous exposed-pad connection, to obtain the intended analog performance.
Disebarkan
Smart Home Audio Accessory
The WM8978CGEFL/V can serve as the audio interface in a connected smart-home accessory that accepts digital audio, captures a microphone, and drives a local speaker. The 24-bit stereo I2S/PCM interface provides a conventional digital-audio connection to an embedded processor, while integrated microphone preamplifiers and output drivers reduce board-level complexity. Its compact 5 x 5 mm QFN-32 footprint suits small enclosures, but system partitioning matters: any switching converter, radio, or high-speed digital circuitry should remain spatially separated from the microphone paths. Confirm the device's exact supply, clock, and output limits for the selected processor platform.
Disebarkan
Compact Embedded Audio Module
An embedded audio module can use the WM8978CGEFL/V to provide a compact analog front end alongside a digital host controller. The codec's stereo 24-bit I2S/PCM interface supports digital transport, while its integrated differential-microphone preamplifiers, headphone driver, speaker driver, and line outputs cover common local audio paths. This integration is helpful when the module must support several audio functions without allocating space for discrete amplifiers. The 5 x 5 mm package still requires assembly-capable land geometry and careful thermal-pad soldering. Before release, validate the complete module with the intended microphone, speaker, headset, and line-output loads because those external components strongly influence system performance.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk WM8978CGEFL/V — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | WM8978GEFL/V | WM8978CGEFL | WM8978 |
|---|---|---|---|---|
| Brand | Wolfson Microelectronics plc | Wolfson Microelectronics plc | Wolfson Microelectronics plc | Wolfson Microelectronics plc |
| Package | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) | 32-QFN (5 x 5 mm) |
| Product Type | Stereo audio codec with speaker driver | Stereo CODEC with speaker driver | WM8978-family stereo CODEC | Stereo CODEC with speaker driver |
| Audio Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Digital Audio Interface | I2S and PCM | I2S and PCM | I2S and PCM | I2S and PCM |
| Channel Configuration | Stereo | Stereo | Stereo | Stereo |
| Microphone Inputs | Stereo differential microphone preamplifiers | Stereo differential microphone preamplifiers | Stereo differential microphone preamplifiers | Stereo differential microphone preamplifiers |
| Integrated Outputs | Speaker, headphone, and differential or stereo line outputs | Speaker, headphone, and differential or stereo line outputs | Speaker, headphone, and differential or stereo line outputs | Speaker, headphone, and differential or stereo line outputs |
| Target Market | Low-power portable multimedia equipment | Low-power portable multimedia equipment | Portable multimedia equipment | Portable multimedia equipment |
Penyeberangsung Jelas
- Combines multiple analog audio stages in one compact device (vsSSM2604)
- Provides a compact 24-bit stereo I2S/PCM interface (vsADAU176)
- Offers closely related same-family ordering variants (vsWM8978GEFL/V)
Catatan Desain
Use the manufacturer's 32-QFN land pattern and preserve the exposed-pad connection with an uninterrupted ground plane. Keep analog input and output components close to their corresponding pins, and use short return paths rather than routing analog signals through the digital interface area. Confirm stencil, paste volume, placement tolerances, and reflow profile against the package construction and assembly requirements.
Separate the differential microphone inputs from digital clocks, switching-regulator nodes, and display or communications circuitry. Route the microphone pair symmetrically, maintain a continuous ground reference beneath the analog section, and place input filtering components at the codec pins where practical. These measures reduce differential-to-common-mode conversion and help preserve the available microphone-headroom margin.
Do not select the speaker, headset, microphone, or line load based only on the codec's functional description. Verify the exact output-power, impedance, distortion, supply-voltage, clock, and sample-rate limits from the manufacturer datasheet. Also verify the complete ordering suffix and operating-temperature grade before releasing a BOM, since the published WM8978 family descriptions do not establish every qualification detail.
Keep the digital I2S or PCM clock and data routes away from the microphone and line-output pins, and avoid placing switching components directly beneath sensitive analog nodes. Connect the codec's exposed pad to the recommended ground structure and provide local supply bypassing close to its pins. After assembly, evaluate audible artifacts and clock-related interference under the highest expected playback and capture loading.
Maklumat Kesediaan
The WM8978CGEFL/V is an audio codec rather than an automotive-qualified component. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified in the cited product information.