XA7A25T-1CSG325Q - Automotive Artix-7 FPGA | AMD
MPN: XA7A25T-1CSG325Q ✓ AktifXA7A25T-1CSG325Q Ringkasan
An FPGA is a semiconductor whose digital logic is configured after manufacture. It belongs to the programmable-logic hierarchy, alongside CPLDs, and provides parallel implementation of control algorithms, data processing, and hardware interfaces. The Artix-7 XA family combines a 28-nm programmable-logic architecture with automotive qualification. The XA7A25T-1CSG325Q supports junction temperatures from -40°C to 125°C and is identified as an AEC-Q100 automotive-grade part.
The device provides 23,360 logic cells for finite-state machines, protocol engines, and control logic. Its 150 DSP slices support fixed- and floating-point operations used in signal processing, while 1,658,880 bits of block RAM provide dedicated on-chip storage. The 150 user I/O support connections to external sensors, transceivers, memory, and automotive controllers. Speed grade 1 identifies its performance class within the XA7A25T family.
The 324-LFBGA package supports dense board-level integration but requires careful escape-routing and BGA assembly practices. Power, decoupling, signal integrity, and thermal design depend on the selected bitstream and operating conditions. Programming typically uses a JTAG interface, while configuration can be loaded from nonvolatile memory or another configured device according to the board architecture. The manufacturer overview identifies the device as part of the XA Artix-7 product selection.
Typical uses include automotive body and chassis control, sensor fusion preprocessing, CAN or LIN interface aggregation, gateway logic, industrial monitoring, and low-latency digital signal processing. The automotive temperature range and AEC-Q100 qualification make it most appropriate when design qualification requires a rugged automotive-grade programmable device.
For layout, follow the AMD package pinout and PCB design guidance, place decoupling capacitors near the relevant power pins, and provide clean power for every voltage rail. Confirm the selected configuration, clocking scheme, I/O standards, and unused-pin treatment before tape-out or production programming.
This page combines the manufacturer product overview, verified distributor attributes, drop-in family comparisons, and practical selection guidance to support schematic review, footprint validation, qualification planning, and sourcing decisions.
Pilihan pengganti yang segera untuk XA7A25T-1CSG325Q — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XA7A25T-1CSG325Q (sama faktor bentuk dan kaki) — berbeza dalam Automotive Qualification, Device Type, Mounting Type, Package.
XA7A25T-1CSG325I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XA7A25T-2CSG325I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XA7A25T-1CSG325C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A25T-1CSG325C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A25T-1CSG325I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XA7A25T-1CSG325Q Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Artix-7 XA FPGA |
| Logic Cells | 23,360 cells |
| User I/O | 150 I/O |
| DSP Slices | 150 slices |
| Block RAM | 1,658,880 bits |
| Speed Grade | Grade 1 |
| Kemasan | 324-LFBGA (CSBGA) |
| Package Pin Count | 325 pins |
| Jenis Pemasangan | Surface mount |
| Automotive Temperature Range | -40°C to 125°C junction |
| Automotive Qualification | AEC-Q100 |
| Moisture Sensitivity Level | MSL 3 |
| Moisture Exposure Duration | 168 hours |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin XA7A25T-1CSG325Q 325 pins
Konfigurasi pin untuk XA7A25T-1CSG325Q (325 pins pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XA7A25T-1CSG325Q.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XA7A25T-1CSG325Q patut untuk 6 aplikasis: Automotive Body Control, Vehicle Sensor Fusion Preprocessing, Automotive Communication Gateway, Industrial Control and Monitoring, Low-Latency Digital Signal Processing, Programmable Logic Instrumentation.
Automotive Body Control
The XA7A25T-1CSG325Q fits centralized body-control and gateway logic because it combines 23,360 logic cells, 150 user I/O, and 150 DSP slices in one automotive-grade device. Its -40°C to 125°C junction range and AEC-Q100 identification support harsh vehicle environments. Engineers can implement switch inputs, lamp and relay control, debouncing, diagnostic logic, and communication arbitration in parallel rather than across multiple processors. The 324-LFBGA package also shortens board interconnections, although it requires careful escape routing and assembly control. Timing closure should account for the grade-1 device characteristics and the final I/O standards used by attached sensors and actuators.
Disebarkan
Vehicle Sensor Fusion Preprocessing
The XA7A25T-1CSG325Q can preprocess automotive sensor streams before they reach a higher-level controller, using its 150 DSP slices for filtering and transforms while 23,360 logic cells handle configuration, buffering, and data routing. The 1,658,880 bits of block RAM provide local storage for sampled data and working buffers, reducing pressure on external memory during burst processing. The 150 user I/O support parallel sensor inputs and communication links. Its automotive qualification and -40°C to 125°C junction range make it appropriate for temperature-variable vehicle locations, but power and routing closure depend on the selected clock rate and DSP utilization.
Disebarkan
Automotive Communication Gateway
The XA7A25T-1CSG325Q is suitable for a vehicle communication gateway that aggregates multiple digital interfaces, performs protocol conversion, and applies routing or filtering rules in hardware. Its 150 user I/O offer ample board-level connectivity, while 23,360 logic cells support parallel protocol engines and deterministic control logic. The automotive temperature qualification allows placement near a vehicle network controller, and the grade-1 speed designation supports timing-sensitive interface processing. Design teams must still verify voltage standards, direction constraints, clock domains, and pin assignments against the CSG325 package documentation before implementation.
Disebarkan
Industrial Control and Monitoring
The XA7A25T-1CSG325Q can implement deterministic machine control, condition monitoring, and multi-channel acquisition front ends where parallel logic and DSP resources are valuable. Its 150 DSP slices can accelerate filters or transforms, while the 23,360 logic cells handle sequencing, diagnostics, and data packing. The 1,658,880-bit block RAM can hold acquisition records and processing windows, and the 150 user I/O support sensors and actuators. Although the device is automotive-qualified, industrial systems may instead select XA7A25T-1CSG325I to match the industrial temperature class and reduce qualification overhead.
Disebarkan
Low-Latency Digital Signal Processing
The XA7A25T-1CSG325Q supports low-latency filtering, modulation, demodulation, and waveform-generation tasks because 150 dedicated DSP slices can execute parallel arithmetic alongside general programmable logic. Block RAM of 1,658,880 bits provides predictable storage for coefficients and sample buffers, while 150 user I/O facilitate high-density digital connectivity. The grade-1 speed class should be selected in the FPGA design tools and timing constraints, especially when pipelining multiple DSP operations. Automotive qualification extends usability in vehicle audio, sensing, and vibration-analysis systems where environmental requirements exceed ordinary commercial conditions.
Disebarkan
Programmable Logic Instrumentation
The XA7A25T-1CSG325Q can serve as a programmable instrumentation front end for test, measurement, and production equipment requiring flexible timing and I/O. Logic cells can implement counters, state machines, capture logic, and protocol analyzers, while DSP slices support numerical operations and block RAM stores captured waveforms. With 150 user I/O, the device can connect multiple channels without relying exclusively on a microprocessor bus. The 324-LFBGA package minimizes board area but increases assembly complexity, so escape routing, via density, and power-plane continuity should be reviewed early against AMD's package guidance.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XA7A25T-1CSG325Q — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XA7A25T-1CSG325I | XA7A25T-2CSG325I | XA7A25T-1CSG325C | XC7A25T-1CSG325C | XC7A25T-1CSG325I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-LFBGA (CSBGA) | 324-LFBGA (CSBGA) | 324-LFBGA (CSBGA) | 324-LFBGA (CSBGA) | 324-LFBGA (CSBGA) | 324-LFBGA (CSBGA) |
| Series | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 XA | Artix-7 | Artix-7 |
| Logic Cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells |
| User I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O |
| DSP Slices | 150 slices | 150 slices | 150 slices | 150 slices | 150 slices | 150 slices |
| Block RAM | 1,658,880 bits | 1,658,880 bits | 1,658,880 bits | 1,658,880 bits | 1,658,880 bits | 1,658,880 bits |
| Speed Grade | Grade 1 | Grade 1 | Grade 2 | Grade 1 | Grade 1 | Grade 1 |
Penyeberangsung Jelas
- Automotive temperature qualification (vsXA7A25T-1CSG325I)
- Grade-1 timing selection (vsXA7A25T-2CSG325I)
- Automotive XA family qualification (vsXC7A25T-1CSG325C)
Catatan Desain
Treat the 324-LFBGA layout as a high-density escape-routing problem. Assign every ball according to the AMD CSG325 package drawing, preserve the recommended ball and via geometry, and avoid routing critical configuration or clock nets beneath the device wherever the stack-up permits. Place power and ground decoupling structures close to their associated package balls, then verify the complete stack-up and manufacturing rules with the selected board fabricator.
Estimated: power dissipation equals the sum of internal FPGA power and I/O power at the selected clock, configuration, utilization, and voltage. If the design uses 0.5 W internally, 0.2 W across the I/O system, and 1.0 W through the power supply, the total estimated dissipation is 1.7 W. Apply the package-specific thermal model and board copper assumptions for the final junction-temperature calculation.
Create the power tree for every voltage rail identified in the manufacturer package and device documentation, including core and I/O supplies. Use the recommended voltage tolerances and decoupling arrangements rather than combining rails through a single improvised filter. Check startup sequencing, rail monotonicity, and the configured I/O state against the board-level power architecture, especially when external transceivers remain active during FPGA initialization.
Assign clock inputs and high-speed interfaces using the device's documented banks and package constraints. Keep configuration signals away from high-speed data paths, observe impedance and return-path continuity, and reserve unused pins according to the device guidance. A successful schematic can still fail electrically if the BGA escape geometry, via stubs, or supply-return connectivity does not match the selected interface standard.
A shared CSG325 footprint does not make every suffix a drop-in replacement. The Q, I, and C suffixes identify different qualification and temperature classes, while the speed digit changes timing and power characteristics. Before replacing XA7A25T-1CSG325Q, recreate the device identifier in the FPGA design tools, repeat static timing analysis, confirm the bitstream target, and verify all automotive qualification requirements.
Maklumat Kesediaan
The exact MPN is identified as an automotive AEC-Q100 part and as RoHS compliant. No separate REACH, halogen-free, lead-free, or conflict-minerals declaration was established for this ordering code.